MONSTER Airmars XKT32 True Wireless Earphones Instruction Manual

Monster Airmars XKT32

True wireless Bluetooth headphone instruction manual

Product Schematic Description

| Headphone2
---|---
| Instructions Manual1
| Charging case1
| Type-C Charging cable1

Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable.

Indicator guide
Rated input: 5V 320mA(Charging case)Rated input: 5V 35mA(Headphone)
TIPS: When the cover of the charging box is closed, the indicator light of the charging box flashes ice-blue, please charge the charging box.

Mode| Describe|

Sound prompt

---|---|---
Power On| Ice blue light of the headset blinks three times| “Power on
Power Off| Red indicator light on the headphones remains on for 1 second and goes off| “Power off”
Pairing| Ice blue and red lights of the headset flash alternately| “Pairing”
Connected| Headphones LED indicator is off.| “Connected”
Disconnected| Ice blue and red light of the headset flashes alternately| “Disconnected”
Low Battery| Red indicator on the headset blinks| “Battery low”
Headphones placed in charging case| Ice blue indicator light of the charging case is bright| –
Charging case low power| Ice blue indicator of the charging case blinks| –
Charging case charged| Red indicator of the charging case blinks| –
Charging case fully charged| Red light of the charging case is bright| –

Product operating instructions

1. Power on
   Method 1：Open the top cover of the charging case, and the headset will turn on automatically;
   Method 2：Long press the MFB button of the left/right headset for about 3 seconds to power on the headset.

2. Power off
   Method 1：Put the earphone back in the charging case, close the cover of the charging case, and the earphone will automatically shut down;
   Method 2：The device automatically shuts down after 3 minutes of disconnection from the Bluetooth device.

3. Pairing
   Step one: Open the top cover of the charging case, and the headset will turn on automatically;
   Step two: Open the Bluetooth list of smart devices, search for “Monster Airmars XKT32” to pair, and the connection is successful After that, you will hear the “Connected” tone

• Headphones will try reconnecting to the device within 3 minutes when connection is lost.

NOTE:

• Fully charge the headphones and power off before an intended not-in-use period.
• Unplug the charging cable after charging.
  Operation
  Normal

Music playback

Game mode/Music mode switch: Connected device

Restore factory settings

When you turn on the headphone, make sure it does not connect to any Bluetooth device, and click the MF button 5 times to clear the pairing record, then turn off the headphone.

Precautions

1. Take out the earphone from the charging box, without pressing any button, the earphone will automatically turn on, connect or pair, put the earphone into the charging box, and the charging box will automatically Charge your headphones. Turn them off.
2. Often clean, long life, if not used for a long time, it is recommended to charge once every 15 days to extend battery life, and the charging part of the headset is often used with cotton swabs Alcohol wipe, can help smooth charging, avoid bad contact, affect the use experience.
3. The battery [battery pack or battery combination] shall not be exposed to lighting, baking or similar overheating environment; Do not disassemble, knock, squeeze or throw.In the fire, if there is serious swelling, do not continue to use; Do not place in high temperature environment; Do not use after soaking water.
4. Because this product adopts wireless connection mode, it is affected by environment, mobile phone brand, usage behavior and other factors in daily use.It may be normal to have a brief, slight sound delay during the playing of music.

Warnings

1. Do not use headphones at high volume for an extended perios of time.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agent on the headphones.

Name of the Parts

| Hazardous Substances
---|---
Pb| Hg| Cd| Cr(VI)| PBB|

PBDE

Housing| 0| 0| 0| 0| 0| 0
Loudspeakers| 0| 0| 0| 0| 0| 0
PCBA| X| 0| 0| 0| 0| 0
Accessories| X| 0| 0| 0| 0| 0

This table is complied according to SJ/T 11364
O : Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X : Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuitdifferent from that to which the receiver disconnected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCCID：2A8PV-QSMXKT32
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!
User info

User name| | Email|
---|---|---|---
Contact number| | Postal code|
Mailing address|

Product information

Product name| Product number|
---|---|---
Product barcode / Serial number / Batch number|

Vendor information

Name|
---|---
Address|
Contact number| | Postal code|
Sales date| | Invoice number|
Remark|

Certificate of Approval
Product No:
Production Time: PASS
QC:

Documents / Resources

| MONSTER Airmars XKT32 True Wireless Earphones [pdf] Instruction Manual
Airmars XKT32 True Wireless Earphones, Airmars XKT32, True Wireless Earphones, Wireless Earphones, Earphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>