ELECTRA PAS.27N Door Entry System User Manual

June 1, 2024
Electra

ELECTRA PAS.27N Door Entry System

ELECTRA-PAS-27N-Door-Entry-System-PRODUCT

Product Information

Specifications

  • Model: classic AUDIO
  • Case Material: ABS case + Secured Glass
  • Dimensions: 170 x 96 x 22 mm
  • Weight: 0.3 kg
  • Operating Voltage: 11-14 Vd.c.
  • Stand-by Current: 2 mAd.c.
  • Operating Current: 40 mAd.c.

Product Usage Instructions

Installation

  1. Connect cables PSU/DDA according to the specified connections.
  2. Use UTP/FTP cat5e or cat6 cables with screw connectors for video connections.

Programming

  1. Power on the installation.
  2. Activate programming mode at the outdoor panel by typing 999 and entering the installer password.
  3. Select menu option 3 – Prog posture by touching the key.
  4. Enter the apartment address in a 3-digit format (001, 002…256).
  5. Press 999 to exit menu 3.

Use

Answering the call & initiating a conversation

  1. Short-press the key to answering the call.
  2. Keep pressing the key to talk to the caller.
  3. Lift your finger off the key to listen to the caller.

Granting access

To open the door, short press the key after ensuring the caller is identified.

Volume adjustment

Press the volume key successively to adjust the volume between two levels and mute mode.

Frequently Asked Questions (FAQ)

Q: How do I adjust the volume?

A: Press the volume key successively to toggle between volume levels and mute mode.

Q: What cables should I use for video connections?

A: For video connections, use UTP/FTP cat5e or cat6 cables with screw connectors.

Specification

ELECTRA-PAS-27N-Door-Entry-System-FIG-1

Safety instructions

Cables

AUDIO Standard 4 Wire / 4 Fire

  • TCYY – 2x2x0.5-24 AWG (max. 30m);
  • TCYY – 3x2x0.5-24 AWG (max. 50m);
  • TCYY – 4x2x0.5-24 AWG (max. 50m);
  • 2 4 x 0.5 mm (max. 60m);
  • 2 4 x 0.75 mm (max. 100m);ELECTRA-PAS-27N-Door-Entry-System-FIG-2

Screw connectors

VIDEO UTP/FTP

Screw connectorsELECTRA-PAS-27N-Door-Entry-System-
FIG-4

Installation

classic AUDIOELECTRA-PAS-27N-Door-Entry-System-
FIG-6

classic 4.3″ VIDEOELECTRA-PAS-27N-Door-Entry-System-
FIG-7

Installation – Video system connectionsELECTRA-PAS-27N-Door-Entry-System-
FIG-8

Programming

The terminals can be programmed with the number (address) of the apartment, as follows:

Power the installation.

  1. The programming mode is activated from the outdoor panel – type 999 and insert the 6-digit installer password.

  2. By touching the key, the cursor is positioned at menu 3 – Prog posture.

  3. Press the key until the Adresa post field is displayed.

  4. Insert the address of the apartment, which must have a 3-digit format: 001, 002 … 256.
    While programming the address of the apartment using the keypad of the panel, keep pressing the key of the terminal for which the address is being programmed.

  5. Type 999 to exit from menu 3.

Use

ELECTRA-PAS-27N-Door-Entry-System-FIG-11

Outdoor panels

ELECTRA-PAS-27N-Door-Entry-System-FIG-12

Warranty

  1. A 24-month warranty is granted, according to the existing legislation, based on the purchase document.
  2. Warranty is granted for non-conformity and/or hidden defects.
    Warranty is NOT granted for incorrect installation and/ or operation, non- compliance with this manual; broken glass, blows, mechanical shocks; theft, fire, floods, natural disasters; unprotected products during renovation activities; the RFID access cards (tags), which are considered consumables.

MADE in the EU by   ELECTRA s.r.l

SUPPORT ELECTRA Building Communications GmbH

Documents / Resources

| ELECTRA PAS.27N Door Entry System [pdf] User Manual
PAS.27N, MCS.47N, DAV.44A, PAS.27N Door Entry System, PAS.27N, Door Entry System, Entry System
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals