ELIVED YD5011 Soundbar TV Mount Instruction Manual

June 1, 2024
ELIVED

ELIVED YD5011 Soundbar TV Mount

ELIVED-YD5011-Soundbar-TV-Mount-PRODUCT

Product Specifications

  • Model: DWD704_US1.0
  • Main Dimensions: 17.7″ (450mm) x 33.9″ (860mm) MAX: 32.5″(825mm)
  • Weight Capacity: 15 lbs (6.8kg)

Product Usage Instructions

Supplied Parts and Hardware
The product includes various parts and hardware such as wall plates, connecting plates, support plates, hooks, brackets, lag bolts, concrete wall anchors, screws, washers, and more. Not all parts included will be used.

Extra Tools You Need (Not Supplied)
Depending on the type of wall (wood studs or concrete), you may require tools like a stud finder, drill bit, hammer drill bit, pencil, screwdriver, level, wrench, and safety equipment.

Safety Caution
It is essential to carefully read and understand the installation instructions provided. Ensure that the weight of the soundbar does not exceed 15 lbs (6.8kg) to prevent damage or injury. Verify that the total weight of your TV, soundbar, mount,and accessories is within the weight rating of the TV mount.
Additionally, ensure the wall can support five times the combined weight of the TV, mounts, and soundbar.

Must Check Before Getting Started
Before starting the assembly process, verify that all parts are included and undamaged. Do not proceed if any parts are missing or damaged.

Assembly Steps

  1. Assemble Wall Plate and Support Plate
  2. Assemble Wall Plate
  * Connect two wall plates using the connecting plate and screws provided.
  * Tighten the screws with a screwdriver.
2.  **Assemble Support Plate**
  * Remove the knob nut from the support plate.
  * Install the support plate to the hook using the knob nut.
  1. Mount with TV Mount Bracket
    • Connect the wall plate and brackets using screws and a screwdriver.
    • Hang and secure the TV mount ensuring it is done by two persons.

INSTALLATION INSTRUCTION

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(1\)

If you have any questions, please feel free to contact Customer Service via Amazon before returning.

Supplied Parts and Hardware

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(2\)

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(3\)

NOTE: Not all parts and hardware included will be used.

Extra Tools You Need (Not Supplied)

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(4\)

Safety Caution

Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

  • The weight of your soundbar DO NOT EXCEED 6.8kg (15 lbs).
  • Please read through the user manuals of your TV, soundbar and TV mount for additional guidance.
  • Incorrect installation may result in product damage or body injury.
  • You must verify that the total weight of your TV, soundbar, soundbar mount and any accessories must be lower than the maximum weight rating of your TV mount.
  • For wall mounted TVs, the wall must be capable of supporting five times the weight of the TV, mounts and soundbar combined.

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!

Must Check Before Getting Started

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(5\)

Assemble Wall Plate and Support Plate

Assemble Wall Plate

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(6\)

Assemble Support Plate

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(7\)

Mount with TV Mount Bracket

Assembly Options (Just for reference)

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(9\)

Remove Your TV from the TV Moun

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(10\)

Attach the Soundbar Brackets to Your TV

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(11\) ELIVED-
YD5011-Soundbar-TV-Mount-FIG- \(12\)

Hang the Whole Assembled Unit to the TV Mount

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(13\)

Mount without TV Mount Bracket

Soundbar brackets directly attach to TV back

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(15\)

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(16\)

Mount on the Wood Stud

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(19\)

  • Locate your studs. Verify and mark the center of the stud by finding the stud edges using awl and stud finder.
  • Line up the holes with your stud center line. Level the wall plate and mark the pilot hole locations.

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(20\)

Drill pilot holes using a Ф5/32 in (Ф4mm) diameter drill bit.

IMPORTANT:
Do not drill holes into where water pipes or electrical wires are located. Be sure to drill into the center of the stud.

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(21\)

Install wall plate using lag bolts A with Socket Wrench, NO Electrodrill. No anchors when installed onto the wood studs.

CAUTION:
To avoid potential personal injury or property damage:
All 2 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

Mount on the Solid Concrete Wall

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(24\)

IMPORTANT:
Do not drill holes into where water pipes or electrical wires are located, or mortar between blocks.

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(25\)

Use the hammer to knock anchors into the concrete wall. Be sure the anchors are seated flush with the concrete surface.

Install wall plate using lag bolts A  and anchors with Socket Wrench, NO Electrodrill.

CAUTION:

To avoid potential personal injury or property damage:
All 2 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

Hang the Soundbar to Support Plate

  1. Adjust screw down (M4×25mm)
  2. Hang the support plate components to the wall plate.
  3. Adjust the support plate components width to fit your soundbar width or mounting holes.
  4. Hang the soundbar onto the support plates.

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(26\)

Secure the Soundbar

OPTION A
Soundbar with threaded inserts

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(29\)

OPTION B
Soundbar without thread inserts

ELIVED-YD5011-Soundbar-TV-Mount-FIG- \(30\)

Frequently Asked Questions (FAQ)

What is the weight capacity of the product?

The product can support a maximum weight of 15 lbs 6.8kg.

What tools are required for installation?

Depending on your wall type, you may need tools like a stud finder, drill bits, screwdriver, level,wrench, etc.

What should I do if I find missing or damaged parts?

Do not return damaged items to your dealer; instead, contact customer service for assistance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals