ELIVED YD3033 Ultra Slim TV Wall Mount Instruction Manual

May 15, 2024
ELIVED

ELIVED-LOGO

ELIVED YD3033 Ultra Slim TV Wall Mount

Specifications:

  • Product Dimensions: Max Space: 16″
  • Load Capacity: MAX 88 lbs (40 kg)

Product Usage Instructions

Safety Caution

Please read the installation instructions carefully. This product is designed for use in wood stud or solid concrete walls. Do not install into drywall alone. The wall must support five times the weight of the TV and mount combined to avoid damage or injury.

Must Check Before Getting Started:

  • MIN X: 43.5 mm
  • MAX VESA: 400 x 400 mm

Supplied Parts and Hardware:

  • Mount
  • Extenders
  • TV Screws (M6, M8, M4)
  • Washers and Spacers

Installation Steps:

OPTION A: Wood Stud Installation

  1. Locate studs and mark the center using a stud finder.
  2. Level the mounting template and mark pilot hole locations.
  3. Attach wall plate to the wall using the provided\ instructions.

OPTION B: Solid Concrete Wall Installation

  1. Level the mounting template and mark pilot hole locations.
  2. Drill pilot holes using a 7/32 in (5.5mm) diameter drill bit.
  3. Avoid drilling where water pipes or electrical wires are located.

Hanging and Securing TV:

Before hanging the TV, conduct a wall plate installation integrity test. Ensure the TV weight does not exceed 88 lbs (40 kg).

FAQ

Q: What should I do if I have doubts about the safety of installation?

A: Contact customer support for assistance before proceeding with installation.

Q: What should I do if parts are missing or damaged?

A: Do not return damaged items to your dealer. Contact customer service for replacement parts.

If you have any questions, please feel free to contact our customer support before returning.

Safety Caution

Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

  • This product is designed for use in wood stud or solid concrete wall.
    DO NOT install into drywall alone.

  • The wall must be capable of supporting five times the weight of the TV and mount combined.

  • Incorrect installation may result in product damage/property damage or body injury.
    We shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!

Must Check Before Getting Started

Verify Your Wall Construction

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-2

Product Dimensions

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-21

Supplied Parts and Hardware

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-3

Extra Tools You Need

(Not Supplied)

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-4

Attach VESA Plate to TV

Select VESA Plate Configuration
Measure the width and the height of the square or rectangle formed from the VESA holes pattern. Select the configuration to use based on the measurement from TV.

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-5

Disassemble VESA Plate
Remove 2 preassembled screws and washers, save them for using to next step, then detach the VESA plate from the mount (01).

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-6

Assemble VESA Plate and Extenders (When VESA > 200mm)
If your TV hole pattern is greater than 200×200mm, attach extenders (02) to VESA plate using bolts (D) and nuts (E).

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-7

Select TV Screws

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-8

Need Spacer?

Yes, choose the appropriate screws, washers,and spacers for your TV.

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-9

Do not tighten the screws excessively or tighten them by using the Electrodrill, or your TV might be damaged.

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-10

Attach Wall Plate to Wall

OPTION A:
Wood Stud Installation

Locate your studs. Verify and mark the center of the stud by finding the stud edges using awl and stud finder.
Line up the holes with your stud center line. Level the mounting template and mark the pilot hole locations.

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-11

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-12

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-13

CAUTION:
To avoid potential personal injury or property damage:
All 4 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, the Arrow Must Keep UP at this step!!

OPTION B:
Solid Concrete Wall Installation

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-15

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-16

Hang and Secure TV to Wall Plate

Before hanging TV, please conduct “wall plate installation integrity test” first.

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-17 ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-18

Adjustments

(If necessary)

Leveling Adjustment
If needed, TV can be leveled ±3 degrees via adjusting the 2 screws with the wrench (B).

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-19

Tilt Adjustment

  1. Loosen the tilting bolts and nuts.
  2. Adjust TV to your desired angle.
  3. Retighten the bolts and nuts to fix the intended angle.

ELIVED-YD3033-Ultra-Slim-TV-Wall-Mount-FIG-20

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals