ELIVED YD3005 TV Wall Mount Instruction Manual

ELIVED YD3005 TV Wall Mount Instruction Manual

Safety Caution

Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

• This product is designed for use in wood stud or solid concrete wall.
  • DO NOT install into drywall alone.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Incorrect installation may result in product damage or body injury.

WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.

Must Check Before Getting Started

Drywall with wood studs

Solid concrete wall

CAUTION: DO NOT install into drywall alone.

Installation Tools (Not Included)

Wood Stud Installation

• Stud Finder

• Awl

• Wood Drill Bit

Concrete Installation

• Masonry Drill Bit

• Hammer

• Band Tape

• Pencil

• Electrode

• Socket Wrench

• Screwdriver

Supplied Parts and Hardware

Arm and Wall Plate

Arm Extensions

Brackets

Side Cover

Extension Arm

Extension Arm

Hardware (Wall / Product)

• Lag Bolt M8x65mm

• Wrench

• Bolt M6x12mm

• Washer Ф6.5

• M6 Nut

STEP 1 Attach the TV Brackets

Select TV Screws

Need Spacer?

Yes, choose the appropriate screws, washers,and spacers for your TV.

No, just choose the screws, washers.

CAUTION: Ensure bracket is securely fastened before moving on to the next step.

(a) For Flat Back

(b) For Round Back / Extra Space

Attach Extension Arm

Solid concrete wall installation go to STEP3-OPTION B on Page 7. Wall plate (When 16″ < wood studs spacing ≤ 24″)

Wall Plate Installation

OPTION A: Wood Stud Installation

CAUTION: Do not use in drywall or wood.

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

To prevent the TV falling down, the Arrow Must Keep UP at this step!!

Install wall plate using lag bolts and washer with Socket Wrench, NO Electrode.

OPTION B: Solid Concrete Wall Installation

To prevent the TV falling down, the Arrow Must Keep UP at this step!!

Install wall plate 01 using lag bolts A with Socket Wrench, Tighten the lag bolts until they are pulled firmly against the wall plate.

Product Dimensions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>