ELIVED LM4-4 No Stud TV Wall Mount Installation Guide
- June 16, 2024
- ELIVED
Table of Contents
ELIVED LM4-4 No Stud TV Wall Mount
Product Information
Specifications
- Model: LM4-4
- Max Weight Capacity: 88 lbs (40 kg)
Product Usage Instructions
Installation
- Before starting the installation, please read the instructions carefully and ensure you understand them.
- The product is designed for use in drywall with or without a wood stud. Do not install it into a solid concrete wall.
- Ensure that the wall is capable of supporting five times the weight of the TV and mount combined.
- Check all the included hardware and parts to make sure everything is included and undamaged. If there are any shortages or damages, contact customer service.
- Attach the wall plate to the desired location on the wall using the provided screws.
- Attach the upper holder to the back of the TV using the appropriate screws.
- Attach the two down holders to the lower portion of the TV using the provided screws.
- Carefully lift the TV and align the upper holder with the wall plate. Insert the upper holder into the wall plate and secure it with the provided screws.
- Double-check that all connections are secure and tighten any loose screws.
Safety Precautions
- Always read and understand the safety instructions before installing or using this product.
- If you have any doubts about the safety of the installation, assembly, or use of this product, please contact customer service for assistance.
- This product contains small items that could be a choking hazard if swallowed. Keep them away from children.
FAQ
- Q: What is the maximum weight capacity of this product?
- A: The maximum weight capacity of this product is 88 lbs (40 kg).
- Q: Can I install this product on a solid concrete wall?
- A: No, this product is designed for use in drywall with or without a wood stud. It should not be installed into a solid concrete wall.
- Q: What should I do if there are missing or damaged parts?
- A: If you find any shortages or damages in the included parts, please contact customer service for assistance.
- Q: What should I check before starting the assembly?
- A: Before starting the assembly, make sure to verify that all parts are included and undamaged. Additionally, ensure that the maximum distance between the mounting holes on the back of your TV is 400mm/16″. The maximum weight capacity of the TV and mount combined should not exceed 88 lbs (40 kg).
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
- Horizontal × Vertical
- Min: 100mm×100mm (4″×4″)
- Max: 400mm×Unrestricted (16″×Unrestricted)
Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly, or use of this product, please contact us.
- This product is designed for use in drywall with/without wood studs. – DO NOT install into a solid concrete wall.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Incorrect installation may result in product damage or body injury.
W ARNING: This product contains small items that could be a choking hazard
if swallowed.
Before starting assembly, verify all parts are included and undamaged. For
parts shortage or damage, please contact us.
Must Check Before Getting Started
CAUTION
DO NOT install into concrete or brick.
DO NOT mount to patched areas/ drywall seams/uneven walls.
The drywall must be of sound construction with no water damage.
Installation Tools (Not Included)
Hardware Included
TV Screws / Washers
Step 1-1 Select TV screw diameter
- Thread screws by hand into the threaded holes on the back of your TV to select which screw diameter fits your TV.
Step 1-2 Select TV screw length
Step 2 Measure your TV pattern
Measure and note the width of the square or rectangle formed from the VESA holes pattern .
- 100mm ≈ 4in.
- 200mm ≈ 8in.
- 300mm ≈ 11 3/4in.
- 400mm≈ 16in.
Step 3 Attach the bracket
- For Flat Back
- For Round Back / Extra Space
Step 4 Wall plate installation (for drywall with /without stud)
- Position the wall plate 0 1 at your desired height and secure it with the all nails A total of 23pcs.
- Alternate installing all the nail holes from side to side.
Step 5 Lift and hang TV with bracket onto the wall bracket
- Adding cables before hanging the TV onto the wall plate.
- Hang the TV by securing the Upper Holders 2 onto the wall plate.
Product dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>