ELIVED YZ-S01_US2.0 Soundbar Wall Mount Instruction Manual
- June 16, 2024
- ELIVED
Table of Contents
ELIVED YZ-S01_US2.0 Soundbar Wall Mount
Safety Precaution
CAUTION AND MAINTENANCE:
- Don’t allow children to climb, stand, hang, or play on any part of mount.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Incorrect installation may result in product damage or body injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
WARNING : This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!
If you have any questions, please feel free to contact us via Amazon.
Supplied Parts and Hardware
|
For Drywall installations ONLY
DO NOT use in concrete or wood
---|---
For Concrete installations ONLY
DO NOT use in drywall or wood
|
|
|
Soundbar Screws
|
Soundbar Washers
Note: Not all hardware included will be used.
Installation Tools (Not Included)
-
Stud Finder
-
Awl
-
Wood Drill Bit
Ф5.5mm
(Ф7/32″) -
Masonry Drill Bit
Ф8mm
(Ф5/16″) -
Hammer
-
Band Tape
-
Pencil
-
Electro drill
-
Screwdriver
Determine your install method
Installation Instructions
Step 1 Install plastic washers
Option A: For wood studs (12″ or 16″ or 18″ or 24″)
-
Locate your studs. Verify and mark the center of the stud by finding the stud edges using a Awl or an edge to edge stud finder.
1-2. Please expand the Template , level the template, find the 12″/16″/18″/24″ hole, then mark it. -
Install the plastic washers using the lag bolts with screwdriver, NO Electro drill.
Option B: For drywall
Option C: For solid concrete wall or brick wall
- Please expand the Template , level the template on the wall.Then mark the position you want according to the width of the previous step.
- Drill pilot holes.
- Install the concrete anchors with the hammer.
- Install the plastic washers using the lag bolts with screwdriver, NO Electro drill.
Step 2 Install bracket
- Attach the bracket on the plastic washer by keyhole.
- Install the leveling screw with screwdriver, NO Electro drill.
Step 3 Install soundbar
Option:
Adjust the leveling screws on the brackets to level the soundbar
If the Soundbar is not level after installing, please find the bracket on the lower side and turn the leveling screw clockwise on the bracket to level the soundbar by using the screwdriver.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>