ELIVED B0BRSDBGN5 Universal Soundbar Wall Mount Instruction Manual

ELIVED B0BRSDBGN5 Universal Soundbar Wall Mount

Product Information

The Soundbar Wall Mount is designed to securely mount your soundbar to the wall. It includes various parts and hardware for different types of installations, such as drywall, concrete, wood studs, solid concrete walls, or brick walls. The mount is compatible with soundbars that have threaded inserts on the back or no threaded inserts.

Supplied Parts and Hardware

• Drywall Anchor
• Concrete Anchor
• Plastic Washers
• Hanging Template
• Soundbar Screws
• Soundbar M6 x 16mm, M5 x 16mm, M4 x 16mm Washers

Note: Not all hardware included will be used.

Installation Tools (Not Included)

• Stud Finder
• Awl
• Masonry Drill Bit (5/16 inch/8mm)
• Hammer
• Band Tape
• Pencil
• Electro drill (not recommended for some steps)
• Screwdriver

Product Usage Instructions

Step 1: Install plastic washers

Option A: For drywall

1. Expand the Hanging Template and level it on the drywall. Mark the position you want according to the width of the previous step.
2. Install the drywall anchors using the hammer and screwdriver.
3. Install the plastic washers using the lag bolts and screwdriver. Do not use the electro drill.

Option B: For wood studs (12 or 16 or 18 or 24)

1. Locate your studs and mark the center of the stud by finding the stud edges using an Awl or an edge-to-edge stud finder.
2. Expand the Hanging Template and level it. Find the appropriate hole for your stud spacing (12/16/18/24) and mark it.
3. Install the plastic washers using the lag bolts and screwdriver. Do not use the electro drill.

Option C: For solid concrete wall or brick wall

1. Expand the Hanging Template and level it on the wall. Mark the position you want according to the width of the previous step.
2. Drill pilot holes.
3. Install the concrete anchors with the hammer.
4. Install the plastic washers using the lag bolts and screwdriver. Do not use the electro drill.

Step 2: Install bracket

1. Attach the bracket on the plastic washer using the keyhole.
2. Install the leveling screw with a screwdriver. Do not use the electro drill.

Step 3: Install soundbar

Note: Power up your soundbar before installation.

For Bottom Mounted (Optional)

1. Secure the soundbar to the bracket by aligning the brackets and inserting the soundbar.
2. Secure the soundbar using appropriate screws.

For Shelf style (Optional)

1. Remove the film of the adhesive on the bracket.
2. Secure the soundbar to the bracket by aligning the brackets and inserting the soundbar.

Option: Adjust the leveling screws on the brackets to level the soundbar.

CAUTION AND MAINTENANCE

• Don’t allow children to climb, stand, hang, or play on any part of mount.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Incorrect installation may result in product damage or body injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!
If you have any questions, please feel free to contact us via Amazon.

Supplied Parts and Hardware

Note: Not all hardware included will be used.

Installation Tools (Not Included)

Determine your install method

1. Bottom Mounted With threaded inserts
2. Shelf-style (threaded inserts on the back or no threaded inserts)

Step 1 Install plastic washers

Option A For drywall

1. Please expand the T 6emplate , level the template on the drywall.Then mark the position you want according to the width of the previous step.
2. Install the drywall anchors with the hammer2 and screwdriver.
3. Install the plastic washers using the lag bolts 4 7 with screwdriver,NO Electro drill.

Note:Don’t over-tighten the lag bolt

Step 1 Continue

Option B For wood studs (12” or 16” or 18” or 24”)

Note: Don’t over-tighten the lag bolt

1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a Awl or an edge to edge stud finder.
2. Please expand the Template 6 , level the template, find the 12”/16″/18”/24″ hole, then mark it.
3. Install the plastic washers 4 using the lag bolts 7 with screwdriver,NO Electro drill.

Option C For solid concrete wall or brick wall

1. Please expand the T 6emplate 6 , level the template on the wall.Then mark the position you want according to the width of the previous step.
2. Drill pilot holes.
3. Install the concrete anchors 3 with the hammer.
4. Install the plastic washers 4 using the lag bolts 7 with screwdriver,NO Electro drill.

Step 2 Install bracket

1. Attach the bracket 1 on the plastic washer 4 by keyhole.
2. Install the leveling screw  8 with screwdriver,NO Electrodrill.
   Note: Don’t touch the washer. 4

Step 3 Install soundbar

Option: Adjust the leveling screws on the brackets to level the soundbar

If the Soundbar is not level after installing, please find the bracket on the lower side and turn the leveling screw clockwise on the bracket to level the soundbar by useing the screwdriver.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>