VIABECS SYFT7172M Wireless Apple Carplay Tundra Radio Installation Guide
- June 1, 2024
- ViaBecs
Table of Contents
VIABECS SYFT7172M Wireless Apple Carplay Tundra Radio
Installation Video
- #1 Video： remove the factory car radio https://www.youtube.com/watch?v=hn_3hqSdWjc&t=5s
- #2 Video ： Use wireless carplay https://www.youtube.com/watch?v=gizPQ1wS7aA
Check Your Factory Radio
- SYFT7172M Radio comes with a CAN005-X harness which the harness only supports steering wheel control, factory JBL amplifier or backup camera.CAN005-X harness with SimpleSoftCanbusfits Model B and Model C.
- OEM Radio Model B: The factory radio has a factory JBL Amplifier
- OEM Radio Model C: Your car has a factory JBL Amplifier and factory backup.
- OEM Radio Model D: Toyota Sequoia Limited 16-18 has different types of factory radios.
Please purchase the CAN004-X harness via the link below.
How to connect a backup camera
STEP 1: How to Choose the Canbus options of CAN005-X harness
- S1: connect the head unit with your Phone hotspot or wifi first. Press Car Settings — Factory — Select Models — password is 123456 — Model choose.
- S2: Choose CanBox Brand: 19: No Protocol — 30: Toyota — Models:00:General — Config: Public
Finally, press ok to save the settings. Then the head unit will update it automatically. Here is the video as a reference. Video: Set up canbus option on TS10 Radio https://www.youtube.com/watch?v=PKbGqFFcCAc&t=51s
Radio Wiring Diagram
Device Ports
STEP 1: How to connect aftermarket backup camera
Video: How to wire a Backup Camera
STEP 2: Set Camera Format
Problem: Why my backup camera image is black when I put the car in reverse? Please confirm the resolution of your camera first.
- If your camera is not HD, please choose normal — SD — NTSC/PAL.
- if your camera is HD version, please choose the normal — HD — AHD 720P/25fps, or AHD 1080P/25fps.Then test the camera again after you change the camera format.
TS10 Head Unit FAQs
What is the Factory Setting Password?
The password is: 123456
Q2: What is the Reset factory?
The password is: 7890
Q3: How to change the KPH to MPH?
Please click Theme app — Setting — Plugin –Speed Unit You can change to KPH to
MPH How To Change Car Launcher Theme In ViaBecs Car StereoVideo:
https://www.youtube.com/watch?v=HXSWJOeRbew
Q4: How do I update the ViaBecs TS10 software?
You can update the system and MCU online. Please connect your home wifi first.
and then open the car setting app — about — Detection Update. Video:
https://www.youtube.com/watch?v=0BABIjvTllw
Q5: How to activate Tlink for Apple Car Play & Android Auto?
How to Connect and Use Wireless Apple Carplay on ViaBecs TS10 Radio
S1. You need to connect wifi to activate Tlink when you use it at first. How to find the wifi. Please drop down the Quick Setting Menu. And then a long-press wifi icon to turn on it. and then you can try to connect your phone hotspot first.
Note: Please clear the Tlink usage record first.
S2. if Tlink still asks you to put the auth_key, please take a clear photo of the QR activating code and then send me. and then my engineer will activate it after scanning the code.
- Please click “About” on the Tlink app
- Choose the first option ((Wireless Carplay + Wireless Android Auto + Wired Android Auto)Then click the “refresh” to get the new QR code
- Take a photo and send it to me
Note: the code will be invalid if the time is too long. and then our engineer will scan the QR code to activate it.
Q6: How To Change Boot Logo On ViaBecs Android Head Unit Car Stereo?
Video: https://www.youtube.com/watch?v=izVcfczZK7U
Q7: How to remap panel button on ViaBecs car stereo?
Video: https://www.youtube.com/watch?v=V05wCEH2NRU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>