ViaBecs SYFT7198L Wireless Apple Play Car Stereo with Bluetooth Instruction Manual

ViaBecs SYFT7198L Wireless Apple Play Car Stereo with Bluetooth Instruction Manual

Installation Video

#1 Video: How to remove the factory radio. https://www.youtube.com/watch?v=EZpSkmwugAk
#1Video: Use wireless or wired carplay
https://www.youtube.com/watch?v=gizPQ1wS7aA

Check Your Factory Radio

1. OEM Radio Model A: This radio is wihout factory JBL Amplifier and factory Backup camera .The XC004-SP harness can fit it.
   Model Number: SYFT7198L
   Model A:
   2008-2012 ΤOYOTA Highlander
   Factory Function: Without JBL Amplifier, without or with backup camera
   Note: The factory backup camera wil still be displayed on the upper small screen.
   Proper Wiring Harness: XC004 (included)
   

2. OEM Radio Model B : This radio is washout factory JBL Amplifier and factory Backup camera. The CAN005-X harness can fit it.
   OEM Radio Model B: This radio is washout factory JBL Amplifier and factory Backup camera. The CAN005-X harness can fit it.
   

3. OEM Radio Model C: This radio has factory JBL Amplifier and factory Backup camera. The CAN005-X harness can fit it.
   Model Number: SYFT7198L
   Model C:
   2011-2013 ΤOYOTA Highlander
   Factory Function: with JBL Amplifier, with backup camera, USB Cable Proper Wiring Harness: CAN005-X (No included) Note: 1. The No. 6 port is the Camera Connector.
   You need to buy an extra hazard button dash kit to install separately.
   

4. CAN004-X harness with Simple Soft Canbus fits two types of the car radio.(ModelD). You can order it via the link below.
   https://www.amazon.com/ViaBecsHighlander20152018AftermarketConnector/dp/B09BBB5B83
   Note: Connect Red AUX R of power harness with the AUX R IN line of Audio cable. Connect White AUX L of power harness with the AUX L IN line of Audio cable. You can check the photo below.
   

How to connect factory backupcamera

1. You need to connect the yellow male camera RCA of CAMERA Connector withthePIN10Rear CAM VIN.
   Note: It is a Nissan Wiring harness in the picture. It is as a reference.
   

Radio Wiring Diagram

1. Device Ports
   

How to connect aftermarket backupcamera

Set Camera Format

Problem: Why my backup camera image is black when I put the car in reverse?

Please confirm the resolution of your camera first.

1. If your camera is not HD, please choose normal — SD — NTSC/PAL.
2. if your camera is HD version, please choose the normal — HD — AHD 20P/25fps,orAHD1080P/25fps.

Then test the camera again after you change the camera format.

TS10 Head Unit FAQs

Q1: What is the Factory Setting Passwo

The password is: 123456

Q2: What is the Reset factory?

The password is: 7890

Q3: How to change the KPH to MPH?

Please click Theme app -- Setting -- Plugin --Speed Unit You can change to KPH to MPH Video：https://www.youtube.com/watch?v=HXSWJOeRbew

Q4: How do i update the ViaBecs TS10 software?

References

• ViaBecs Car Stereo Wiring Harness with Canbus for Toyota Camry RAV4 Corolla Tundra Highlander 2007-2013, Radio Wire Harness Power Cable Support 16PIN Android Head Unit JBL Amplifier Backup Camera SWC : Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>