ViaBecs 9 Inch Android 11.0 Touchscreen Car Camry Radio Installation Guide

ViaBecs 9 Inch Android 11.0 Touchscreen Car Camry Radio

Guide to Install ViaBecs Camry Radio

Product Information

The ViaBecs Camry Radio model SW5245 comes with the XC004-SP harness and is compatible with three types of OEM factory dashboard radios:

• Type 1: Without factory JBL Amplifier and factory Backup V camera. The XC004-SP harness fits for this type of car radio. It can support factory SWC.
• Type 2: With factory JBL Amplifier. CAN005-X harness with Simple Soft Canbus fits this type of car radio. It can support factory SWC, factory JBL, and factory backup camera.
• Type 3: With factory JBL Amplifier and factory Backup camera.
  CAN005-X harness with Simple Soft Canbus fits this type of car radio. It can support factory SWC, factory JBL, and factory backup camera.

If your Steering Wheel Control can’t work, please contact ViaBecs Tech Support for help on Amazon.

Product Usage Instructions

Step 1: Check Your Factory Dashboard

Determine the OEM radio type of your car dashboard (type 1, type 2, or type 3) before purchasing or installing the ViaBecs Camry Radio.

Step 2: Wiring Diagram

Refer to the YT5760B Wiring Diagram provided in the user manual to connect the device ports properly.

Step 3: How to Remove Your Factory Radio

Refer to the video tutorial link provided in the user manual on
how to remove your factory radio before installing the ViaBecs
Camry Radio.

Step 4: How to Connect Aftermarket Backup Camera

Refer to the instructions provided in the user manual on how to
connect aftermarket backup camera if needed.

Step 5: ViaBecs YT5760B Head Unit FAQs

Refer to the YT5760B Head Unit FAQs section in the user manual for additional information and instructions on:

• Factory Setting Password: The password is 8888.
• User Manual: Download the new user manual via the Google Drive link provided or contact ViaBecs for a copy in English.
• KPH to MPH: Press KPH to change to MPH after updating the system.
• Software Update: Follow the steps provided in the user manual to update the ViaBecs YT5760B software.
• Backup Camera Image: If the camera image displays black, change the setting of the camera format by clicking Car setting > factory setting > password is 8888 > reverse camera setting.
• Zlink Activation: Connect wifi to activate Zlink when using it for the first time. Refer to the user manual for additional instructions.

Our car radio model SW5245 comes with XC004-SP harness.
If your Steering Wheel Control can’t work, please contact ViaBecs Tech Support for help on Amazon.

How to remove your factory radio.
https://www.youtube.com/watch?v=eLFTdbZU8Ww&t=35s

Check Your Factory Dashboard

• OEM Radio type 1: This radio is wihout factory JBL Amplifier and factory Backup camera.

• The XC004-SP harness fits for this type of car radio. (type 1) It can support factory factory SWC.

• OEM Radio type 2: Your car has factory JBL Amplifier

• OEM Radio type 3: Your car has factory JBL Amplifier and factory Backup camera.

• CAN005-X harness with Simple Soft Canbus fits two types of the car radio. (type 2 and type 3). It can support factory factory SWC, factory JBL and factory backup camera.
  You can order it via the link below.
  https://www.amazon.com/ViaBecs-Harness-Corolla-Highlander- Amplifier/dp/B09SCS9W1S

YT5760B Wiring Diagram

Device Ports

POWER PORTS

How to connect aftermarket backup camera.

REAR CAMERA AND SIM CARD CONNECTION METHOD

Note: Connection of the yellow line will not be needed if you already have a cambus box and the reverse control line (G5area) has been connected to the canbus box.

YT5760B Head Unit FAQs

• Q1: What is the Factory Setting Password?
  The password is: 8888

• Q2: the user manual is useless for the YT57960B head unit, any solution？
  YT5760B UI interface:

We have a new user manual now.
you can download it via the Google Drive link below.
https://drive.google.com/file/d/1C5cy7G8yq-qkKK- O0FAtzle1Ny5BeFU7/view?usp=sharing Or you can contact us for the new user manual in English.

• Q3: How to change the KPH to MPH?
  it can press KPH to change to MPH after you update the system.

• Q4: How do i update the ViaBecs YT5760B software?
  There are steps to update the system.

  • S1: This is a video on how to download system files. You can take a look first.
    https://youtu.be/E2o1orBlxrs

  • S2. Then you can try to download system files on your computer.
    You need to copy the Google Drive link and go to your browser to open it.

  • S3: Here is a video on how to update the system.
    https://www.youtube.com/watch?v=GBpyQ5QfhXk

  • gongban_YT5760B_ui1_12-zlink-hw-ota-v1.72
    https://drive.google.com/file/d/19quDV-OMC- Y7l2ekwq2nNJwH4UtraboG/view?usp=sharing

  • ketu_YT5760B_ui1-v1.70_4976aa85_ota.tar.gz
    https://drive.google.com/file/d/1GUbOjOnkbdLtZ8fpDRlBot6IxGvDd4OD/view?usp=sharing

  • Note: Don’t need to unzip the system file. you only need to copy the three files to a USB stick after you format the USB stick first.

• Q5: Why my backup camera image is black when I put the car in reverse?
  If the camera image displays black, you need to change the setting of the camera format. Please confirm the resolution of your camera first.

  • If your camera is not HD, please choose “normal”, “SD”, “NTSC/PAL”.
  • if your camera is HD version, please choose the “normal”, “HD”, “720P or 1080P”. Please click Car setting > factory setting > password is 8888 > reverse camera setting. you can change the camera setting and then test the camera again.

• Q5: How to activate Zlink for Apple car play & Android Auto?
  Inactivated

  *  **S1. You need to connect wifi to activate Zlink when you use it at the first.**  

How to find the wifi.
Please drop down Quick Setting Menu.
And then a long-press wifi icon to turn on it.
and then you can try to connect your phone hotspot first.
Note: Please clear the Zlink usage record first.

  *  **S2: you can change the Time Zone manually.**  

Please car setting app — Android Setting — go to setting > system > date & time.
you can turn off the option of “Automatic Time Zone” first.
Then change the time zone manually.
one person shared a youtube video on how to activate Zlink successfully via this solution. https://www.youtube.com/watch?v=2mjZIYWJMkw

  * S3. if Zlink still asks you to put the auth_key, please take a clear photo of the QR activating code and then send me.  

and then my engineer will activate it after scanning the code.

  * Please click “About” on the Zlink app
  * Choose the first option (Wireless Carplay + wired Carplay + Android Auto) Then click the “refresh” to get the new QR code
  * Take a photo and send it to me  

Note: the code will be invalid if the time is too long. and then our engineer will scan the QR code to activate it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>