Goldair GEOR260 2400W Outdoor Radiant Heater with WiFi Instruction Manual
- June 5, 2024
- GOLDAIR
Table of Contents
Goldair GEOR260 2400W Outdoor Radiant Heater with WiFi
General Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this appliance. Covering this appliance
presents fire risk and will activate the safety fuse; permanently disabling
the unit.
WARNING: Do not use this appliance in small rooms when they are occupied
by persons not capable of leaving the room on their own, unless constant
supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any
flammable material a minimum distance of 1 metre from the air outlet.
- Use only the voltage specified on the rating label of the appliance.
- Keep all objects at least 1 metre from the front and sides of the appliance.
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
- Do not use the appliance if it has been dropped or damaged.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
General Care and Safety Guide
- Never use the appliance to dry clothes.
- Always unplug appliance when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Do not use if there are visible signs of damage to the appliance.
- Do not connect the appliance to mains supply until completely assembled and adjusted.
- Ensure hands are dry before handling the plug or main unit.
- Ensure appliance is on a flat, stable, heat-resistant surface.
- Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to become a hazard.
- Carry out regular checks of the supply cord to ensure no damage is evident
- Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service or repair.
- Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high wattage appliances.
- A correctly specified, undamaged extension cord may be used with this appliance provided it is used in a safe manner.
- Do not remove plug from power socket until the appliance has been switched off.
- Do not remove plug from power socket by pulling cord; always grip plug.
- Don’t place appliance on bedding or on thick & long carpet where the openings may get blocked.
- Switch off and use handle provided when moving
- Do not place appliance close to radiant heat source.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Do not sit on the appliance.
- Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
- Do not operate in areas where petrol, paint or other flammable liquids are used or stored.
- Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids.
- The appliance must not be immersed in any liquids.
- There are no user serviceable parts installed in the unit.
- Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
- This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.
- If your appliance does not work, or is not working properly, contact the place of purchase or the Customer Services Team.
Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front and 50cm from
the sides of the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING: Never leave this heater unattended when in use.
Ensure heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the
off position, insert the power plug into the mains outlet.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will
overheat the plug and socket and could result in fire.
WARNING: This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are occupied by
persons not capable of leaving the room on their own, unless constant
supervision is provided.
Components
- Heater Housing
- Grill
- Heating Lamp
- Wall Bracket
- Heat Setting Selector & LED Indicator
- Power Switch
Assembly for Wall Mounting
Before using this appliance, remove all of the packing. Check to ensure that
all parts of this heater, cord and plug are not damaged. Confirm all parts
before disposing of carton. Do not leave packaging materials like bags and
staples within reach of children or animals.
WARNING: This heater should be installed at least 30cm from the ceiling,
50cm from side walls and at least 1.8m above the floor.
WARNING: This heater must be affixed to a sturdy wall. Never attach to
walls made of wood or other flammable material. Attach using the bracket
supplied; do not use any other supports or attachments.
Follow these instructions for wall mounted use.
- Position the wall bracket (part A) on a suitably strong exterior wall, a minimum of 1.8m above the ground.
- Mark the hole positions using a pencil. Ensure that the holes are straight by using a spirit level (not included).
- Using a drill (not included), drill 4 holes in the positions that you have marked.
- Reposition the wall bracket over the pre-drilled holes and secure to the wall using the 4 screws (part B) provided. The curved part of the wall bracket must be at the uppermost position. The wall support must be horizontal.
- Fix the securing bracket (part H) to the heater using the screw pack provided (part D, part E and part F).
- Place the securing bracket into the wall bracket and fix into place using the screw (part C) provided.
- You heater is now ready for use. Please follow the operating instructions on page 9.
- Please ensure that you have read these instructions thoroughly prior to use.
Your heater can be controlled by the Remote Control (included) or via the unit
itself. For both types of operation, ensure the power switch on the side of
the heater is switched on. The indicator light will turn red. The remote
requires 2 x AAA batteries (not included).
Control Panel and Remote Control
- Remote Control Receiver
- Status Indicator Light
- WiFi Signal Indicator
- Power Indicator
- 1 Hour Timer Indicator
- 2 Hour Timer Indicator
- 4 Hour Timer Indicator
- Function Button
- Timer Button (remote control)
- On Button (remote control)
- Off Button (remote control)
To operate via Remote Control
- Ensure that the power switch on the side of the heater has been switched on.
- Turn the heater on by pressing the ON button on the remote control.
- To set the timer via the remote control, press the timer button. The timer indicators will light up, letting you know how long you have set the timer for. To cancel the timer, press the timer button until all timer indicator lights are no longer illuminated.
- Turn the heater off by pressing the OFF button on the remote control.
To operate via the Heater Control Panel
- Ensure that the power switch on the side of the heater has been switched on.
- To turn the heater on or off, press the function button on the control panel.
CAUTION: The heater generates heat during use. Proper precautions must be taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
- The heater requires regular cleaning to ensure trouble free operation:
- Unplug the heater from the mains supply before cleaning.
- Ensure that the heater has been allowed to cool down completely before cleaning.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
- Never use solutions such as petrol, thinners or polishing agents.
- Ensure the heater is dry before plugging back into the mains supply.
WiFi – Downloading and Setting up APP
This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone
is 2.4GHz capable
Note this device will only work within your home WIFI system. This does not
operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.
Download Goldair mobile APP
- Open the APP Store or Google Play on your mobile phone.
- Open ‘Search’ and enter ‘Goldair’
- Click ‘GET’ and begin to download and install.
Once downloaded to your phone open the APP
- Tap REGISTER near the bottom of the screen.
- Read and agree to the Privacy Policy.
- Add your email address.
- Tap ‘Obtain verification code’
You will then receive an email with a verification code.
- Enter the verification code from your email.
- Create a password.
- Then tap confirm.
If you haven’t received a verification code via email, tap the resend button and when the verification code is received follow above steps. Your APP is now registered and ready for pairing to your device.
Pairing APP to Device
Details for pairing this heater to the Goldair App can be found at the below website link. Either scan the QR code below or enter the website into your browser.
- New Zealand Products
https://www.goldair.co.nz/goldair-app
- Australia Products
https://www.goldair.com.au/goldair-app
Pairing Mode
To connect to the Goldair app you must ensure that your device is in pairing
mode which is where the Wifi Icon is flashing.
Most products will be in pairing mode after switching the device on but if it
is not:
- Put device on STAND-BY mode (ON at the wall but device is OFF)
- Hold down the “WIFI” button for around 5 seconds or until the Wifi icon begins to flash.
Two Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufacture when used in normal domestic use for a period
of two years. In non-domestic use Goldair limits the voluntary warranty to
three months.
Goldair undertake to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of
the Consumers Guarantee Act (1993).
Goldair – New Zealand CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone +64 (0)9 917 4000 Phone 0800 232 633
Website: www.goldair.co.nz
Goldair – Australia CDB Goldair Australia Pty PO Box 574
South Morang
Victoria, 3752
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>