tp-link VIGI C340HPWSM WiFi Network Camera User Guide
- June 5, 2024
- tp-link
Table of Contents
tp-link VIGI C340HPWSM WiFi Network Camera User Guide
Safety Information
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
For indoor camera
- Keep the device away from water, fire, humidity or hot environments.
- Adapter shall be installed near the equipment and shall be easily accessible.
For outdoor camera
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
- Adapter shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Mount Your Camera
Type A
Type B
Type C
(Optional) Installing Waterproof Cable Attachments
*Make sure each part is securely attached and the waterproofing rings are flush to keep out water.
(Optional) Installing Waterproof Seal for Power Connectors
Install the waterproof seal for the power connectors when the camera is
installed outdoors.
*Mount your camera according to the diagrams in the opening chapter of this guide.
Set Up Camera
Here is a typical network topology. The camera works with an NVR for easier batch access and management.
-
Wi-Fi Camera
-
Wi-Fi Camera
-
Wi-Fi Camera
-
Smartphone
-
Network Device (e.g., Switch or Router)
-
Get the TP-Link VIGI App from the Apple App Store or Google Play.
-
Connect your camera to the power source with the provided power adapter.
-
Set up the camera.
-
Open the TP-Link VIGI app and log in with your TP-Link ID. If you don’t have an account, sign up first.
-
Tap the + button on the top right and follow the app instructions to activate and add your cameras.
Note: If you want to use the NVR for easier batch access and management later, add the camera to the same network as the NVR.
Done! You can now remotely view live video, manage cameras, and get instant alerts.
More Management Methods
You can also access and manage your cameras via any of the methods below:
Method 1: Use the camera with your VIGI NVR
Remotely view live video, manage cameras, and get instant alerts.
Before you start, make sure the NVR is working properly.
- Go to the NVR management page, Right click on the Live View screen and click Add Camera.
- Select your camera and click + to add your camera directly. If you have disabled Plug and Play on your NVR, create a password or use a preset password for your camera.
Note: If you are using your cameras with other NVR brands, refer to the NVR’s User Manual to add cameras.
Method 2: Via the VIGI Security Manager (Windows only)
View live video and modify camera settings on your computer.
-
Download the VIGI Security Manager on your computer at
https://www.tp-link.com/download-center/. -
Install the VIGI Security Manager and open it.
-
Cameras on the same network as your computer can be automatically discovered. Go to Settings > Discovered Devices, click + Add to activate your discovered cameras by setting passwords, and follow the instructions to add your cameras.
Support
TP-Link hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/support/ce/.
For technical support, the user guide and more information, please visit
https://www.tp-link.com/support.
References
- Download Center | TP-Link
- CE Regulatory Compliance | TP-Link
- CE Regulatory Compliance | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>