UBIQUITI UACC-PSU-27V-250W Power Supply Unit User Manual
- June 13, 2024
- UBIQUITI
Table of Contents
UBIQUITI UACC-PSU-27V-250W Power Supply Unit
Product Information
- Product Name: UACC-PSU-27V-250W
- Manufacturer: Ubiquiti International Holding B.V.
- Address: Ekkersrijt 3102, Son, Netherlands
- Compliance: The device is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU.
EU Declaration of Conformity: The full text of the EU Declaration of Conformity and detailed compliance information is available at the following internet address: ui.com/compliance
Safety Notices
(if applicable)
- Read, follow, and keep these instructions.
- Heed all warnings.
- Only use attachments/accessories specified by the manufacturer.
WARNING: Failure to provide proper ventilation may cause a Fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
- To reduce the risk of Fire or electric shock, do not expose this product to rain or moisture.
- Do not use this product in a location that can be submerged in water.
- Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information
(if applicable)
- Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
- There are no operator-serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
- This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- a. Do not substitute the power cord with one that is not the approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
- c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
- d. Protective earthing is provided by a Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
- e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Declaration of Conformity
Hereby, UBIQUITI, declares that this device, UACC-PSU-27V-250W, is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU. The full text of the EU Declaration of Conformity and detailed compliance information is available at the following internet address: ui.com/compliance
Ubiquiti International Holding B.V. Ekkersrijt 3102, Son, Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>