Chipjet 2BE5O-9091 ChipStation Home User Guide

Chipjet 2BE5O-9091 ChipStation Home

Product Information

Specifications

• Product Description: Smart Update Device
• Model Number: Chipstation Home
• Hardware Version: V1.9
• Software Version: V1.9
• Frequency Band(s): 2402-2480MHz
• Transmit Power Range(s): 0.51dBm
• Modulation Type(s): GFSK
• Antenna type(s): PCB antenna
• Antenna Gain: 2dBi

Product Usage Instructions

Step 1: Installation
Follow these steps to install the Smart Update Device:

1. Locate a suitable location for the device with minimal obstructions.
2. Connect the device to a power source using the provided power adapter.
3. Ensure the device is within range of your Wi-Fi network for optimal performance.

Step 2: Setup and Configuration
To set up and configure the Smart Update Device, follow these steps:

1. Download and install the accompanying mobile app on your smartphone.
2. Open the app and follow the on-screen instructions to connect the device to your network.
3. Complete the setup process by entering necessary details and preferences.

Step 3: Updating Firmware
Regularly check for firmware updates to ensure your device is running the latest software version:

1. Access the settings menu in the mobile app.
2. Check for available updates and follow the prompts to install them.

Frequently Asked Questions (FAQ)

• Q: How do I reset the Smart Update Device?
  A: To reset the device, locate the reset button on the device and hold it down for 10 seconds until the LED indicators flash.

• Q: Is the Smart Update Device compatible with all routers?
  A: The device is compatible with most standard routers. However, it is recommended to check the compatibility list provided by the manufacturer.

• Q: What should I do if I encounter connectivity issues?
  A: If you experience connectivity issues, try restarting both the device and your router. Additionally, ensure that you are within range of the Wi-Fi signal.

ChipStation Home
User Guide

Please read this User Guide carefully before using the device.
Please retain this guide for future reference.

Device Parts

1. Pin
2. Indicator Light
3. Button
4. USB Port

Preparations

• Scan the QR code to download the Chip Station Home app.
• Get a printer’s USB cable (you need to prepare it by yourself). Use the cable to connect the ChipStation Home device to the power supply. When the indicator light turns red, the device is ready for Bluetooth connection.

Device Firmware Update

• Turn on Bluetooth and open the ChipStation Home app.
• Find the code of your desired device in the Device list. Touch (Unconnected) to connect the device to the app.
• When it displays [Connected), touch the (Close) button.
• Touch the (Update) button to update the device firmware.
• Updating in process. Please do not operate.
• When the update is successful, the app displays (Device ready) and the (Update) button becomes grey.

Chip Update

• When the indicator light on the device turns green, press the pins against the cartridge chip (as shown in the picture below). Press the button once to start updating. The light is off when updating is in process and will be on again after the update is complete.
• The app displays the result.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Equipment generates ,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a Particular installation. If these equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Simplified EU Declaration of Conformity
Hereby, Hangzhou Chipjet Technology Co., Ltd. declares that this Smart Update Device product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EC. In cases of restrictions on putting into service or of requirements for authorisation of use, information available on the packaging shall allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorisation of use exist. Such information shall be completed in the instructions accompanying the radio equipment. The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 45(2).
Frequency range: 2402-2480MHz
RF power: 0.51dBm

EU-Type Examination Form

Notified Body Number: 0980

Certificate Holder Informatio n ( will be recorded in certificate )

Company Name:| Hangzhou Chipjet Technology Co., Ltd.
Contact’s Full Name:| jia xuhui
Address Line:| 4th Floor, Building No.1 ,No. 1180, Bin’an Road, Binjiang District, Hangzhou, Zhejiang, China
Telephone No.:| 13989457409
Fax No:| /
E-mail:| qa_mgr@chipjet.com.cn
EUT Information
Product Description:| Smart Update Device
Model Number:| Chipstation Home
Technical Details of Equipment
Hardware Version:| V1.9
Software Version:| V1.9
Frequency Band(s):| 2402- 2480MHz
Transmit Power Range(s):| 2402- 2480MHz:0.51dBm
Modulation Type(s):| GFSK
Antenna type(s):| PCB antenna, Antenna Gain : 2dBi
Opinion Requested

Radio:| ·  Yes| O No
EMC:| ·    Yes| O No
Safety:| ·    Yes| O No
Health:| ·    Yes| O No
Emergency service:| ·    Yes| O No
Essential Requirement(s)| Applied Specifications / Standards| Test report(s)
---|---|---
Art. 3.2 Radio| ETSI EN 300 328 V2.2.2 (2019-07)| Test report: MTEB24030014-R
Issued date : Mar.04, 2 024
Issued by Shenzhen Most Technology Service Co., Ltd.
Art. 3.1(b) EMC| ETSI EN 301 489-1 V2.2.3 (2019- 11)

ETSI EN 301 489-17 V3.2.4 (2020- 09)

| Test report: MTEB24030014-E
Issued date : Mar.04, 2 024
Issued by Shenzhen Most Technology Service Co., Ltd.
Art. 3.1(a) Safety| EN IEC 62368-1:2020+A11:2020| Test report: MTEB24030014-S
Issued date : 20 24- 03-12
Issued by Shenzhen Most Technology Service Co., Ltd.
Art. 3.1 (a) Health| EN 50663:2017
EN 62479:2010| Test report: MTEB24030014- H
Issued date : Mar.04, 2 024
Issued by Shenzhen Most Technology Service Co., Ltd.
Art. 3.3(g) Emergency service| | Test report No.:
Issued date:
Issued by:

Eurofins Electrical and Electronic Testing NA, Inc.

EU-Type Examination Form
Notified Body Number: 0980

HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE 410-354-3300 • FAX 410-354-3313

Is the RED Evaluation for a(n) (check all that apply) Did you seek another REDCA for this same device prior to Eurofins MET Labs?

File: TCBJ FORM-14 EU Type Examination Form Rev. 9
Maryland | California | Texas
www.metlabs.com

References

• Comprehensive Testing & Certification | Eurofins E&E North America

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>