Tunstall PL-968 Wall-Mount Combination Instructions
- June 3, 2024
- Tunstall
Table of Contents
Tunstall PL-968 Wall-Mount Combination
INSTRUCTIONS
Opening
- Open shutter hatch to reveal the dial and the opening lever.
- Dial existing combination, otherwise factory default 0.0.0.0
- Press down on the opening lever
Setting new combination
- Open the door to reveal the setting mechanism.
- Push the reset lever left and towards you and the reset lever will stay in position.
- Rotate dials to your preferred combination.
- Push the reset lever up and away from you to return to original position. Double-check your combination before closing the storage compartment door..
- Close the storage compartment.
- Scramble the combination dials to lock the front door and conceal your combination.
- Close the shutter hatch.
Wall mounting
NOTE: you will require a X-head/Pozi screwdriver, pencil, a spirit level, drill bit, a drill and a hammer.
- Open the door, as above.
- Position the lock on the desired mounting surface (see note 1).
- Use the sprit level to check that the lock is vertical.
- Mark the position of the screw holes on the desired surface.
- Remove lock.
- Drill holes.
- Use hammer to fit wall plug. (if necessary).
- Position lock.
- Insert and tighten screws.
- Close the storage compartment.
- Scramble the combination dials to lock the front door and conceal your combination. Then close shutter hatch.
NOTES:
- We suggest that you mount the lock in a discrete location away from direct view, such as porches, garage, out of direct eye line.
- Keep shutter hatch closed to increase the weather resistance and to conceal the dials from view.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>