E-YOOSO X-31 2.4G Wireless Mouse User Manual

E-YOOSO X-31 2.4G Wireless Mouse User Manual

HOW TO CONNECT THE 2.4G WIRELESS MOUSE?

1. Insert the attached USB receiver into the proper USB interface of the computer, which will identify and connect the receiver automatically.
2. Install an AA battery in the compartment according to the polarity marks at the bottom of the mouse. When the red LED under the mouse wheel flashes for 5 seconds, it means that the mouse is working.

PRODUCTS FEATURE

1. 2.4GHz operating frequency, transmission distance up to 10 meters.
2. Five DPI adjustable: 800/1200/1600/2000/4800 DPI. (With DPI gear indication, default 1200 DPI).
3. Original high-end power-saving Chip PAW3212, Lower power consumption, More stable cursor, Adaptable to all sorts of surfaces
4. Use infrared LED as mobile tracking light source.
5. Power saving mode, maximum saving of battery energy, and can completely turn off the power.
6. Low battery reminder function.
7. Support Windows98SE/ME/2000/XP/Vista/Windows 7/Win10/ Win11/Mac10. X And other operating systems.
8. Ultra-micro (Nano) receiver, plug and play.

PACKAGE CONTENT

• 1*2.4G Wireless Mouse
• 1*USB Receiver
• 1*User Manual

MOUSE BUTTONS DEFAULT FUNCTION

1. Left button
2. Right button
3. Middle button
4. Forward
5. Backward
6. DPI button

ADVANCED FUNCTIONS

1. DPI Adjustment Function
   There are DPI regulation of 800/1200(default)/1600/2000/4800. When the power is on, the default is 1200 DPI. Click the DPI switching button, then you can switch among these five speeds. During the process, the red LED under the mouse wheel will: flash only one time at 800 DPI; two times at 1200 DPI; three times at 1600 DPI; four times at 2000 DPI; five times at 4800 DPI.

2. Rate of Return Adjustment Function
   Click the middle button and the right button at the same time for 3s and the polling rate will change between 125Hz and 250Hz. When it comes to 125Hz, the red LED will slowly flash five times; when it comes to 250Hz, the red LED will quickly flash five times.

3. . Automatic Sleep and Complete Shutdown Function
   The mouse will enter the stage of deep sleep at standby for 8 minutes. You can click any buttons to wake it up. If you turn off your computer or disconnect the receiver, the mouse will also enter the stage of deep sleep.
   WARM REMINDER: Please remove the battery when not using the mouse for a long time, so as not to corrode the parts.

4. Low battery tips
   When the battery is low, the red LED will flash to remind you of replacing the battery.

5. Receiver Collection Function
   Portable Nano receiver can be placed in the storage interface at the bottom of the mouse

RECONNECTION

The wireless mouse may disconnect with the receiver due to high temperature and high magnetic field. In this case, you have to reconnect them.

1. Disconnect the receiver and insert it again.
2. Remove the battery and then install it in line with the right steps (keep the distance between the mouse and the receiver within about 30CM).

CAUTIONS

1. In wireless mode, the data transmit by 2.4GHz radio waves, the linear using distance is up to 10 meters, which could be reduced if there are large obstacles or environmental interference.
2. The performance of the mouse may also affected by uneven, reflective desktop.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARRANTY

1. Warranty Period: 12 months from purchase.
2. If the products have any qualified problems, Please Contact Us, We Will Solve the Problem for you ASAP.

Service Email: Eyoososervice@163.com

California Proposition 65

WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure – www.P65Warnings.ca.gov

Welcome to Address: www.eyspc.cn Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>