UNIGEAR BQ-001 Bombing Wireless Bluetooth Headphones User Guide
- September 27, 2024
- UNIGEAR
Table of Contents
BQ-001 Bombing Wireless Bluetooth Headphones
“`html
Product Specifications
- Product Name: BQ-001 Bombing wireless Bluetooth headphones
- Accessory: Helmet headscarf, Type-C Charging cable
- Bluetooth Version: V5.3
- Supported Protocols: SBC, AAC
- Transmit Power: Class 2
- Reception Sensitivity: -80dBm
- Working Frequency: 2.402GHz-2.480GHz
- Transmission Distance: 10m
Product Usage Instructions
Charging
Connect the Type-C charging cable to the headphones for
charging. The red light will flash during charging and turn blue
when fully charged.
Installation
The Bombing Bluetooth headphones are compatible with snow
helmets with Audio Ready earmuffs. Insert the headphones into the
helmet’s audio earpiece cover. The headphones can also be inserted
into the specialized helmet hairband.
Bluetooth Parameters
- Bluetooth Name: BQ-001
- Bluetooth Version: V5.3
- Supported Protocols: SBC, AAC
- Transmit Power: Class 2
- Reception Sensitivity: -80dBm
- Working Frequency: 2.402GHz-2.480GHz
- Transmission Distance: 10m
Battery Indicator
The headphones provide a real-time battery level display on iOS
and Android devices. Low battery prompts are indicated by audio
alerts and flashing red lights.
Instructions for Use
Pairing
-
In the off state, press and hold the R headphone button for 2
seconds until the blue indicator lights flash. -
Turn on Bluetooth on your device, search for new devices, and
select BQ-001 to connect. -
Upon successful connection, you will hear “Connected,” and the
blue indicator light will flash every 5 seconds on the right
headphone. -
To disconnect, actively disconnect the headphones for a
prompt.
Charging Instructions
During charging, the red light flashes, and it stays blue when
fully charged.
Pairing Notes
Frequently Asked Questions (FAQ)
Q: How do I know if my headphones are fully charged?
A: The blue light will remain on when the headphones are fully
charged.
Q: Can I use these headphones with any snow helmet?
A: These headphones are compatible with snow helmets that have
Audio Ready earmuffs.
“`
PRODUCT INTRODUCTION
BQ-001 Bombing wireless Bluetooth headphones
Helmet headscarf
Type-C Charging cable
Headphones can be
inserted into the headband,
Speaker
LED Indicator Button MIC
Type-C Charging port
CHARGING
Connect one to one charging cable to charge. The red light on the earphones
will flash to indicate charging, and the blue light will stay on when fully
charged.
INSTALLATION
The Bombing Bluetooth headphones are compatible with any snow helmet that has
“Audio Ready” earmuffs. Simply place the headphones into the helmet’s audio
earpiece cover.
Equi pped wi t h a speci al i zed hel met hai r band. Headphones can be i nser
t ed i nt o t he headband,
BLUETOOTH PARAMETERS
1. Bluetooth Name: BQ-001 2. Bluetooth Version: V5.3 3. Supported Protocols:
SBC, AAC 4. Transmit Power: class 2 5. Reception Sensitivity: -80dBm 6.
Working Frequency: 2.402GHz-2.480GHz 7. Transmission Distance: 10m
BASIC PARAMETERS
1. Weight: About 60g 2. Button: One each on the left and right headphones 3.
Battery Specification: Rechargeable lithium polymer battery 3.7V 4.Low Power
Warning: 3.4V 5. Continuous Talk Time: 10 hours 6. Continuous Music Playback
Time: About 10-11H (at 100% volume) 7. Charging Port: Tpye-C charging 8.
Charging time: About 2 hours 9. Frequency Response: 20Hz~20KHz 10. Operating
Temperature: -20°C~60°C 11. Storage Temperature: -20°C~80°C
BUTTON FUNCTION
1.Play music: Click the R headphone button or play directly from your phone.
2. Pause music: During playback, press the R earphone button to pause. 3.
Previous song: Double-click the R headphone button for the previous song. 4.
Next song: Triple-click the R headset button for the next song. 5.Answer call:
When receiving the call, click on the R earphone button. 6. Reject call: When
receiving a call, press and hold the R headphone button for 2 seconds. 7. End
call: During the call, click the R earphone button. 8. Sound volume: Volume up
and down need to be operated on the cell phone, no operation on the headset.
9. Voice Assistant (Requires phone to support and activate): four clicks on
the R headset button; and you will hear a “Ding” prompt to activate
BATTERY INDICATOR
1. On iOS and Android devices, you can see the real-time battery level of the
headphones. 2. When the battery level is low, the earphones will play an audio
prompt of “Low Battery” and the red light will flash.
INSTRUCTIONS FOR USE
1. Power on manually: In the off state, press and hold the R earphone button
at the same time for 2 seconds, the red and blue indicator lights will flash
alternately, and you will hear an audio prompt of “power on”. 2. Power off
manually: In the power on state, press and hold the R earphone button for 5
seconds, the blue indicator light will light up, and you will hear an audio
prompt of “power off”. 3. If powered on and Bluetooth is not connected, the
headphones will automatically turn off after 5 minutes.
PAIRING
1. In the off state, press and hold the R headphone button for 2 seconds, the
blue indicator lights will flash 2. On your device, turn on Bluetooth, search
for and add a new device. Select BQ-001 to connect. 3. After the headphones
are successfully connected, your will hear ” Connected “, and the blue
indicator light on the right headphones will flash once every 5 seconds 4.
Disconnect: If you actively disconnect the headphones, a “Disconnect” audio
prompt will appear,
CHARGING INSTRUCTIONS
When the headphones are connected to a charging cable for charging, the red
light flashes. And when the earphones are fully charged, the blue light
remains on.
PAIRING NOTES
1. If it is turned on and not connected to any device, the headphones will
automatically turn off after 5 minutes. 2. If the headphones cannot be found
during the search process, please ensure that the device’s Bluetooth is turned
on. Turn off the Bluetooth headphones and then turn them back on. After the
left earphone and the right one are paired each other, please search for the
Bluetooth device once more. 3. If the connection is lost due to the device
being too far from the phone and returning to the signal range within 2
minutes, the device will automatically reconnect. If it does not reconnect
within 2 minutes, it will enter pairing mode, and if it does not successfully
pair within 5 minutes, it will shut down.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>