STREET AERO 2016-2023 Chevrolet Camaro ACM Rear Diffuser Installation Guide

Table of Contents

STREET-AERO-2016-2023-Chevrolet-Camaro-ACM-Rear-Diffuser-product-
image

Specifications:

Main Panel Dimensions: Custom fit for 2016-2023 Chevrolet Camaro SS (Dual Exhaust), LT (Dual Exhaust), SS (Quad Exhaust)
Materials: High-quality metal components
Hardware Included: Small Bolts, Small Nuts, M6 Bolts (40mm, 70mm, 16mm, 25mm), Finishing Washers, Washers, Mounting Brackets CT-1, CT-2, CT-3, CT-4, CT-5, CT-6

Step 1 : Assembling Main Panel and Fins

Step 2 : Removing OEM Washer Bolt and Clip
Remove the 2 OEM Washer Bolt and Clip located under the bumper.

Step 3 : Mounting Main Panel to the Bumper

Secure Mounting Bracket CT-2 to the OEM mounting hole from Step 2 using M6 40mm Bolt, Finishing Washer, Washer, and Nut.
Align and mark Mounting Bracket CT-3 position on the bumper. Pre-drill into the bumper.
Secure Main Panel and Mounting Bracket CT-3 with M6 70mm Bolt, Finishing Washer, Mounting Bracket CT-1, Washer, and Nut.

Step 4 : Attaching Side Panel

Attach Mounting Brackets CT-4 and CT-5 to the Side Panel using M6 16mm Bolt, Finishing Washer, and Nut.
Attach the Side Panel to the Main Panel with Small Bolt and Small Nut.
Mark and pre-drill holes for Mounting Brackets CT-4 and CT-5 on the bumper.
Mount the Side Panel by securing Mounting Brackets CT-4 and CT-5 with M6 25mm Bolt, Finishing Washer, Washer, and Nut.

FAQ:

Q: Can power tools be used to mount the brackets?
A: No, it is not recommended to over tighten or use power tools to mount the brackets as it may damage the product or vehicle.
Q: Are additional tools required for installation?
A: Generally, basic hand tools such as wrenches and drills are needed for proper installation.

INSTALLATION GUIDE

2016-2023 Chevrolet Camaro

Carefully place Fin 1 and Fin 2 onto the Main Panel
(Match the number on the Fin to the number on the Main Panel) Secure with Small Bolt and Small Nut $STREET-AERO-2016-2023-Chevrolet-Camaro-ACM-Rear-Diffuser- $1$$

Remove the 2 OEM Washer Bolt and Clip located under the bumpe $STREET- AERO-2016-2023-Chevrolet-Camaro-ACM-Rear-Diffuser- $2$$

Mount the assembled Main Panel to the bumper by securing Mounting Bracket CT-2 to the OEM mounting hole on STEP: 2 with M6 40mm Bolt, Finishing Washer, Washer, and Nut
NOTE: Reach under or to the side of the bumper to place Washer and Nut inside the bumper
Align Mounting Bracket CT-3 to its correct mounting location then Mark and Pre-Drill into the bumper
NOTE: Use the hole on top of CT-3 to mark the drill location NOTE: Main Panel and Mounting Bracket may need to be removed
Secure the Main Panel and Mounting Bracket CT-3 to the bumper with provided M6 70mm
Bolt, Finishing Washer, Mounting Bracket CT-1, Washer and Nut
NOTE: Reach under or to the side of the bumper to place CT-1, Washer, and Nut inside the bumper

$STREET-AERO-2016-2023-Chevrolet-Camaro-ACM-Rear-Diffuser- $3$$ $STREET-AERO-2016-2023-Chevrolet- Camaro-ACM-Rear-Diffuser- $4$$

IMPORTANT: DO NOT over tighten or use power tools to mount the Mounting Brackets

Attach and secure Mounting Bracket CT-4 and CT-5 to the Side Panel with M6 16mm Bolt, Finishing Washer, and Nut
NOTE: Push the bolt all the way into the socket to prevent it from falling out
Attach the Side Panel to the Main Panel with Small Bolt and Small Nut
NOTE: Do Not tighten Small Bolt (you will need to remove the Side Panel to pre-drill)
Mark where Mounting Bracket CT-4 and CT-5 will be mounted to the bumper
NOTE: Use the hole on top of CT-4 and CT-5 to mark the drill location Pre-drill into the bumper
NOTE: Side Panel and Mounting Bracket may need to be removed before pre-drilling
Mount the Side Panel by securing Mounting Bracket CT-4 and CT-5 with M6 25mm Bolt, Finishing Washer, Washer, and Nut
NOTE: Reach under or to the side of the bumper to place the Washer and Nut inside the bumper
Repeat to install Passenger Side Panel to the Main Panel and bumper