cecotec CCTC-01800 Compact Super-Automatic Coffee Maker Instruction Manual

cecotec CCTC-01800 Compact Super-Automatic Coffee Maker

Specifications

• Model: CREMMAET COMPACTCCINO
• Colors: Black, Black Rose, White Rose, Black Silver
• Power: 1200W
• Capacity: 1-2 cups
• Dimensions: 10 x 6 x 8 inches

Product Information

The CREMMAET COMPACTCCINO is a compact and stylish coffee maker available in multiple color options including Black, Black Rose, White Rose, and Black Silver. It features a power output of 1200W and can brew 1-2 cups of coffee at a time. The sleek design andsmall footprint make it a perfect addition to any kitchen or office space.

Product Usage Instructions

Parts and Components

Before using the CREMMAET COMPACTCCINO, familiarize yourself with its parts and components. Ensure all parts are clean and in good condition.

Before Use

Prior to brewing coffee, fill the water reservoir with the desired amount of water and add coffee grounds to the filter basket. Make sure the machine is plugged in and turned on.

Operation

To start brewing coffee, select your preferred brew strength and cup size. Press the start button to initiate the brewing process. Wait for the coffee to brew and pour it into your cup once ready.

Cleaning and Maintenance

After each use, ensure to clean the filter basket, carafe, and any other removable parts. Regular descaling is recommended to maintain the performance of the coffee maker.

FAQ

• Q: How do I adjust the grind size for my coffee?
  • A : The CREMMAET COMPACTCCINO offers grind size options from fine to coarse. Adjust the setting based on your preference by turning the dial located on the grinder.
• Q: How much coffee can the machine brew at once?
  • A : The machine is designed to brew 1-2 cups of coffee at a time, providing the perfect amount for personal use or small gatherings.

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

• The appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• The device is not intended to be used by children. Keep the appliance and its power cable out of the reach of children.
• Cleaning and maintenance tasks should not be carried out by children.
• Children must not play with the device.
• Check the power cable regularly for visible damage. If the mains cable is damaged, it must be replaced by the manufacturer, its customer service or similarly qualified personnel in order to avoid hazards.
• This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels,
• Do not immerse the cable, plug, or any other part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
• WARNING: the filling opening must not be opened during operation.
• WARNING: take precautions to avoid spillage of liquids on the cable.
• WARNING: incorrect or improper use can be dangerous for the user and damage the appliance. Use the appliance only for the purposes described in this manual. The surface of the heating element is subject to residual heat after use.
• Always disconnect the appliance from the power supply if it is left unattended and before assembly, disassembly, or cleaning.
• It is your responsibility to make sure every user is informed about the warnings and precautions stated in this instruction manual. Do not use the appliance for any use other than the one specified in this manual.
• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is earthed.
• Disconnect the appliance from the mains in any of the following circumstances:
• Before filling up the water tank.
• Before removing or installing any of the appliance’s parts.
• Before cleaning or maintenance.
• When the appliance is not working properly.
• After using the appliance.
• Empty the water tank when the appliance is not going to be used for some time.
• Make sure the appliance has cooled down completely before removing or installing parts and before cleaning it.
• Use the grinder to grind only coffee beans.
• Do not use caramelized or frozen coffee beans. This appliance can only be used with natural coffee beans.
• Always use cold water. The use of hot water or other liquids may damage the appliance.
• Never leave the appliance unattended when it is connected to a mains power supply
• Do not let the cable protrude over the edge of the table or worktop, or come into contact with hot surfaces or sharp edges.
• Place the appliance on a flat, stable surface. Do not use or place the appliance on a hot or damp surface.
• Do not use the appliance if the drip tray is not properly positioned.
• Do not use the appliance if any of its parts are damaged or if the appliance is not working properly.
• WARNING: this product has undergone quality control previous to its commercialization with the aim of ensuring its correct functioning. After the quality control testing, the appliance is cleaned thoroughly, therefore, although it drops inside it.

PARTS AND COMPONENTS

Fig. 1

1. Water tank
2. coffee bean container
3. Grinding level knob
4. Control panel
5. Milk spout
6. coffee spout
7. Power switch
8. Drip tray
9. coffe residues tank
10. Brewing unit
11. slide  cover of the coffee  machine
12. Milk tank tube
13. Milk tank

Fig. 2

1. Temperature indicator light
2. Time indicator light
3. Size indicator light
4. Weight indicator
5. Americano  coffee icon
6. espresso coffee icon
7. cappuccino/latte coffee icon
8. A glass of water/milk icon
9. Double size/Rinse/OK icon
10. Menu/Exit icon
11. low coffee in tank  indicator light
12. Double-size indicator light
13. Open side cover indicator light
14. Empty water tank indicator light
15. Descaling indicator light
16. Blocked press unit indicator light
17. Indicator light for accumulation of dregs in waste container

Please note:
The graphics in this manual are schematic representations and may not exactly match the appliance.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good condition. If there is any piece missing or in bad condition contact centers official technical support service.

Box Content

Instruction manual

cremmaet compaction super-automatic coffee maker

• Plastic cleaning brush
• Metal cleaning brush
• Rubber seals for replacement

OPERATION

Preliminary steps before brewing the first coffee
Place the coffee machine on a flat and stable surface.

• Remove and clean the water tank by dragging it upwards and fill it with water. Then put it back in the same position. You will notice that it inserts smoothly and fits perfectly.
• Fill the coffee bean container after lifting the lid You must fill the tank a little below the limit allowed by the lid to be able to close it.
• Plug the coffee machine into a mains socket.
• Switch on the machine, test it and wipe the coffee spout with a damp cloth.
  • Note: The water may not come out at the ideal temperature during the first few uses. This is normal until the water pipes are filled with hot water and the machine reaches the desired temperature.
  • Press and hold the power button for 3 seconds to switch off the coffee machine.

Preparing an Espresso

1. Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide the output up or down.
2. Press the espresso icon to brew 1 espresso coffee.
3. As the machine starts to operate, readjust the parameters if desired.

During grinding (the control panel display shows “g” icon), press the “+” or “-” buttons to adjust the amount of coffee powder. During coffee preparation (“ml” is displayed on the right-hand side of the display), click the “+* or “-” icons to adjust the number of millilitres of coffee.

Press on the double coffee icon to brew 2 cups of coffee.
Press “EXIT” to finish the operation.

Preparing an Americano

1. Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide the output up or down.
2. Press the Americano button to prepare an Americano coffee.
3. As the machine starts to operate, readjust the parameters if desired.
   • During grinding (the control panel display shows “g” icon on the right), press the “+” or “-” buttons to adjust the amount of coffee powder. During coffee preparation (ml” is displayed on the right-hand side of the control panel display), press “+” or -” to adjustthe amount of liquid coffee. Press the double coffee button to prepare two American coffees.
   • Press EXIT to stop coffee preparation.

Installing the milk tank

1. The milk tank is fitted to the bottom rack by the shape of its base.
2. Open the milk tank lid and fill the milk tank to the desired level. Then close the lid. Keep in mind that if you put more milk in than the quantity you are going to use, it will stay out of the refrigerator longer than it should, which could spoil it and cause unpleasant odours. Place the pipe connecting the milk tank to the coffee machine as shown in figure 1. To do this, connect the milk tank outlet to the inlet on the right side of the coffee spout. Preparing hot water or milk (using the milk tank) Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide the output up or down.
   • Press the “Water/Milk” icon to dispense water. Press and hold the “Water/Milk” icon for 3 seconds to prepare a glass of milk.
   • If you want to stop dispensing water or milk because you already have enough water or milk, press the “Menu/Exit” button to stop the flow.

Preparing a Cappuccino or Latte (using the milk tank)

1. Adjust the height of the coffee spout and place a cup underneath. To adjust, simply slide the output up or down.
2. Press the “Cappuccino/Latte” icon to dispense a Cappuccino.
3. Press and hold “Cappuccino/Latte” for 3 seconds to prepare a Latte.
4. If you want to stop dispensing water or milk because you already have enough water or milk, press the “Menu/Exit” button to stop the flow.
   • Warning : Clean the milk outlet immediately after use. Prevent milk residues from blocking the outlet and creating unpleasant odours.

Adjusting the grinding level

Fig. 3

WARNING: When you need to adjust the grind level of the coffee beans, turn the grind level knob when the grinder is in operation, otherwise the grinder may be damaged.

• Adjust the grind level according to the degree of roast of the coffee beans you use (medium roast beans are recommended). If the coffee comes out too slowly during brewing (the coffee powder is too fine), turn the grind level knob to a coarser grind as shown in figure 3. If during brewing the coffee comes out too fast and too clear (the coffee powder is too coarse), turn the grind level knob until a finer grind is obtained.If the coffee powder is too coarse, turn the grind level knob counterclockwise for a finergrind; if the coffee powder is too fine, turn the grind level knob clockwise for a coarser grind.

Points to bear in mind:

1. The dial is set to the maximum value during the first few uses. It is recommended not to adjust it after the first 100-150 cups. The more repetitive the grinding process, the more the grinder will be adjusted and the less malfunctions will be found in the future.
2. Do not overfill the bean container or leave the coffee beans inside for a long time so that they do not get too wet and lose freshness (especially on humid days). Moisture will | affect the grind, brew and taste of the coffee.
3. If the coffee beans are wet, empty the container and fill it with fresh coffee beans for better taste. Turn the grind level knob to maximum and try grinding the coffee beans. Ifthe coffee machine is working properly, return the knob switch to its original position. By doing this, you will be able to check if there are any beans left inside.
4. If the coffee beans do not grind properly, it is possible that the coffee beans are too wet or that there is too much coffee bean oil accumulated inside. In the latter case, add some grinder cleaner to the bean container and try grinding again.

Menu and settings

In standby mode, press and hold the menu icon for 3 seconds to access the settings.

Temperature settings:

• After entering the menu, press the “MENU” icon to enter the temperature settings, you can press “+* or “-‘ to adjust the coffee temperature.
• Automatic shut-off setting.
• After entering the menu, press “MENU” twice to enter the automatic shut-off setting. You can press “+” or “-‘ to select the time, it can be set to 0.5h, 1h, 2h… until 24h.

Start-up settings

After entering the menu, press the “MENU” icon 3 times to enter the start-up settings, this function is only for professionals or customer service staff.

Manufacturing information

After entering the menu, click on the “MENU” icon 5 times and you will be able to check the manufacturing information such as date and batch number.

Warnings and cautions

1. mpty coffee bean container
2. When the tank icon lights up, it means that the bean container is empty. Fill up the tank.
3. Double coffee
4. When the double coffee icon “x2” lights up, the double coffee function is activated. The machine will brew two coffees at the same time with this function.
5. The machine will not brew the second coffee if the bean container runs empty during the preparation of the first  coffee.
6. Open panel
7. When the side cover icon lights up, it means that the right-side cover is open: close it.
8. Empty water tank
9. When the water tank icon lights up, it means that the water tank is empty or low on water: fill it up.
10. Pressing unit not installed
11. When the pressing unit symbol lights up, it means that the pressing unit is not installed: install it.
12. Coffee residues tank
13. When the waste-holding tank icon lights up, it means that the waste-holding tank is not properly positioned or installed, or that it is full and needs to be emptied. Empty the coffee grounds container every 8 cups of coffee.
14. Descaling
15. When the descaling icon lights up, it means that the machine needs to be descaled. See the “descaling” instructions in the “Cleaning and maintenance” section.
16. Warning of water shortage in the internal pipeline
17. When the no water in internal pipe icon (FIGURE 5) is lights up on the control panel, it means that there is a shortage of water in the brewer’s internal pipe. Make sure that there is water in the tank and that it is properly installed. Press the “EXIT” button to restart the water pump and expel the air accumulated in the internal pipes.

CLEANING AND MAINTENANCE

Cleaning/rinse

1. Adjust the height of the coffee spout and place a cup underneath.
2. Touch the rinse button for 3 seconds to start cleaning/rinsing. This function uses about 60 ml of water and ends automatically after cleaning is completed. It is used to remove possible coffee residues in the pipes.

Dismantling parts for cleaning

Fig. 4

1. Pull the water tank upwards by grasping it at the back and guide it out.
2. Pull the cover on the right side until it is removed.
3. Press the blue arrow at number 3 and pull the brewing unit outwards for cleaning.
4. The drip tray can be removed for cleaning by pulling it outwards. Inside you will see the coffee grounds and all the coffee residues that have accumulated over time. You can use the plastic brush to clean everything. Afterward, dry it before placing it back in the machine.
   • ATTENTION : When reinstalling the brewing unit, a snapping noise will be heard; if you do not hear it, disassemble the unit again and reinsert it.

ATTENTION : Check whether the water tank is at the same level as the top of the machine so that it is positioned correctly. If this is not the case, push the water tank down until it clicks into place.

Daily maintenance

the plunger filter. Clean the processing unit by hand every 3 days. Do not wipe lubricating oil from the bottom and center of the processing unit. Do not wash it in the dishwasher.

Drip tray and waste container| Remove the drip tray and the waste container after each use, rinse under running water and wipe clean with a cloth.

Clean them at least every two days.

Water tank| Rinse the tank under running water every 3 days.
container/grinder| tank, it means that a large amount of oil could be inside the grinder: clean it.

To clean the bean container and the grinder, you can use a

container and brew an espresso with the maximum amount of

Then remove the brewing unit and manually clean the residues inside.

groove| Open the right panel, remove the brewing unit, and clean the

Daily maintenance is important to extend the lifespan of the coffee machine and to always produce good-tasting coffee.

Descaling

• A. Pour the decalcifier into a container with clean water and wait for it to dissolve completely.
• B. Press and hold the menu icon and the standby mode will display the descaling icon.
• C. Take out the water tank, pour the descaling product into it and add clean water until the tank is completely full.
• D. Press the OK icon to start descaling.
• E. Once emptied, remove the water tank, and add clean water.
• F. Press OK icon again and the machine will start the washing cycle.
• G. After the washing cycle has finished, the machine will return to the standby mode.

Sealing rings

Sealing rings are included with the coffee machine and brushes for replacing them in case of wear. When they are replaced, you will notice unwanted coffee or water leaks. To replacethem, you can use any pointed tool to remove the old ones and place the new ones exactly in the same position.

Cleaning the milk outlet

A metal brush specially designed for cleaning the milk outlet holes is included with thebrewer, the plastic brush, and the sealing rings, as the milk can dry out relatively easily and clog the spout.

TROUBLESHOOTING

1.1

|

The water tank is empty.

| Fill the water tank and insert it into the machine.

1.2

|

It is necessary to calibrate the water level sensor.

| When the machine is in standby mode:

1.- Remove the water tank. 2.- Remove the sticker from the reset button on the water level sensor located on the corner of the tank housing. Then press and hold the reset button for 6

seconds.

 |  |  |  |
 |  |  |  | machine.

4.- Plug in and switch on the brewer after 10 seconds. Insert the tank once it has been filled.

2| The display shows a square of dashed lines (FIGURE 5) and

the machine does not dispense water.

| 2.1.| The water tank is not installed correctly.| Install the tank properly

Push the bottom side all the way in.

---|---|---|---|---
2.2| No water flows through the pump.| Open the rear panel and inject water into the water pump.
 |  | 2.3| The internal piping is blocked.| Please contact Cecotec’s
 |  |  |  | Service.
3| The display shows a square of dashed lines (FIGURE 5),

pressing the EXIT button will drain the water, but the warning cannot be

removed.

| 3.1|

The water flow meter wires are coming loose. or the water flow meter is broken.

| Please contact Cecotec’s Service.
 |  | 4,1| Grinding too fine.| Turn the grind level knob to obtain a coarser ground

4

|

Watery/light

|

4.2

| After filling the container with dark| Increase the grinding level or contact Technical Support.
 |  |  | beans, the grinder blades are sticky, and|
 |  |  |  |

clean the container and add

 |  | 4.3| beans block the grinder.|
No.| Problem| Num| Possible cause| Solution
---|---|---|---|---

5

|

comes out.

|

5.1

|

The water tank is not installed correctly.

| Install the tank securely inside

5.2

|

Filter blocked.

|

Clean or replace the filter.

5.3

|

The internal piping of blocked.

|

If this does not solve the problem, contact Cecotec’s

Service.

6

|

The grinder does not work.

| 6.1| Grinder blocked by foreign objects.|

Remove foreign objects from the grinder.

6.2

| The grinder cables are loose.| Please contact Cecotec’s

Service.

6.3

|

The grinder motor is broken.

| Please contact Cecotec’s

Service.

7

|

The processing unit does not work.

|

7.1

|

The transformer is broken.

| Please contact Cecotec’s

Service.

7.2

|

The microswitch is broken.

| Please contact Cecotec’s

Service.

In the event of a fall or malfunction, unplug the appliance immediately from the mains socket. If the appliance experiences a mechanical failure, please contact Cecotec’s Technical Support Service. If the problem persists, contact only authorised technicians, the supplier, or the dealer.

TECHNICAL SPECIFICATIONS

• Product reference: 01598 / 01478/01543 / 01800
• Product: Cremmaet Compactccino Super-automatic Coffee Machine Black
• Rated Power : 1100 – 1350 W (Coffee)
• Voltage: 220-240 V
• Frequency: 50/60 Hz

Technical specifications may change without prior notification to improve product quality.

Made in China

Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities. Consumers must contact their local authorities or retailers for information concerning the correct disposal of old appliances and/or their batteries. Compliance with the above guidelines will help protect the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists atthe time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations. It is recommended that repairs be carried out by qualified personnel. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the Cecotec’s Official Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means(electronic, mechanical, photocopying, recording or similar) without the prior authorization ofCECOTEC INNOVACIONES, S.L.

• www.cecotec.es

Cecotec Innovaciones S.L. Av. Reyes Católicos, 60 46910, Alfafar (Valencia), Spain

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>