EBL 992 Smart Rapid Battery Charger User Manual

EBL 992 Smart Rapid Battery Charger

User Manual

General Information

Detailed instruction is provided in this manual ( the function, safety usage and notices of the charger)

Product Overview

The charger is designed for 1-2 pieces Ni-MH Ni-CD Li-ion rech­argeable batteries and freely charge compatible rechargeable battery like NI-MH/Ni-CD: AA, AAA; Li-ion: 26650/22650/17670/17500/18490/18650/16340(RCR 12 3)/14500/10440 Li-ion Cylindrical rechargeable battery.

• Three charging mode: (CC, CV and trickle charge) could maxim­ize the capacity of the battery to fully.
• Durable ABS material which can effectively help to fire retardant and flame re-sistant.
• he charger is controlled by MCU technology, and equipped with an advanced overtime’ safety functionwhich could auto stop to chargewhile the battery is fully charged, double protection.
• Worldwide usage, more convenient: 100-240V AC 50/60HZ.
• Smart LED to show its charging progress:
• Ni-MH battery: When Three LEDs are lighting together means the battery has been fully charged.
• Li-ion battery: different capacity at the number of LEDs
  • 1 LED — 0-35% capacity
  • 2 LEDs — 35%-75% capacity
  • 3 LEDs — 75%-100% capacity

Specification

• lnput:100-120V 60Hz DC 12V 0.5A
• Output: 1.2V =500mA ‘2 4.2V =500 mA’2
• Ni-MH/Ni-CD:AA,AAA ( 1.2V 500±50mAx2 )
• Lithium-Ion: 26650,22650, 18650, 17670, 18490, 17550, 18350, 163 40(RCR123), 14500, 10440 etc.( 4.2V 500±50mAx2 )

Normal Environmental Conditions

• Using Altitude ;§i 2000M
• Storage environment: -10″C to 50-C; Storage humidity: 45% to 85%
• Using environment: 0’C to 40″C; Using humidity: 35% to 85%
• Working temperature of charger and batteries:
• Surface temperature of charger: 35’C to 60″C
• Surface temerature of batteries: 25″C to 45’C

Using Instruction

• Connect the power cable firstly before charging.
• Place the battery into charger carefully, make sure the+/- pole of the battery is match for the+/- pole of the charger.
• charger could charge AA/AAA Ni-MH Ni-CD and Li-ion cyli-ndrical rechargeable battery.
• The charger’s LED light to show its charging progress.

Caution

• Please use the power cable provided by us.
• The charger could charge compatible battery, please do not charge other type battery.
• If the indicator light does not tum on while charging, please check­ing firstly if the battery is normal and if the installation is correct.
• New battery will reach the best perfonnance after 2-3 times charge and discharge cycle.
• Charge the battery to fully if the battery is long time storage and usage firstly.
• It is normal phenomenon that the battery is warmer than room tem­perature when charging. The temperature will automatically decre-

Warning

• Cutting off the power supply when you no need to charge the batte­ry and take out the battery after fully charged.
• Children should not use this charger without adult’s supervision.
• For connection to a supply not in the U.S.A., usa an attachment plug adapter of the proper configuration for the power outlet, if needed
• Risk of Electric Shock
• Please check prior use, if output voltage and current of the power supply is suitable for the product.
• The plug is used as disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible.
• It may cause electric shock hazard if using the charger incorrectly.
• The charger is using for indoor only, keep it away from moist and heat.
• Put it into safety place where the children could not reach.
• Do not disassemble or reassembly the charger for safety reason.

Size & Weight

• Size 7.13.01.1 inches ( LengthWidthHeight)
• Weight 4.2 ounces

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>