FLUSHMATE Pro Pocket Pressure Assisted Toilet User Guide

FLUSHMATE Pro Pocket Pressure Assisted Toilet

Whether specifying new toilets with Flushmate® Systems or locating replacement vessels or parts, this guide provides the complete list of brands and models that offer Flushmate pressure-assisted technology.

Every drop counts
Leading toilet brands around the world are powered by Flushmate pressure- assisted technology for single-flush performance and water-savings.

• 20% less water
  Flushmate models can consume 20% to 38% less water than 1.6 gpf gravity toilets on average.

• Fewer double flushes
  70-gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.

• Water savings for life
  The flush volume will never decrease which means water savings are sustained for the life of the fixture.

IMPORTANT
Only the toilet models listed in this guide are compatible with Flushmate Systems. See pages 6-13 for all current toilets manufactured to include Flushmate pressure-assisted technology.

Flushmate® Systems

Flushmate pressure-assisted toilets effectively eliminate waste and conserve water through an innovative flushing technology that outperforms traditional gravity toilets. There are three options to choose from, defined by flush volume (water consumption):

• Flushmate IV
• Flushmate III
• Flushmate III

UHET

• Ultra-high-efficiency toilet
• Most water conserving
• WaterSense certified

HET

• High-efficiency toilet

• Water conserving

• WaterSense certified
  The 503H Series is a Flushmate III 503 series system that uses 1.28 gpf.

• Outperforms older models

• For environments with limited water pressure

Commercial A 10-story office building with 1,000 occupants could save 1.2 million gallons of water and up to $10,000 per year by switching to WaterSense toilets.
Residential The average family can reduce water used for toilets by 20 to 60 percent by switching to WaterSense models. Information courtesy of the EPA. For more information, visit: epa.gov/watersense

Flushmate® Equipped Toilet Specifications

If the new toilet will be replacing an existing one, several key specifications — mounting and outlet, rough-in dimension, and bowl shape — are included in this guide to make selection easy

Flushmate® Equipped Toilets

Flushmate 504 Series / 1.0 gpf

IMPORTANT: Gravity-fed toilets cannot be retrofitted with a Flushmate® System.

Flushmate® Equipped Toilets

Flushmate 503H Series / 1.28 gpf

IMPORTANT: Gravity-fed toilets cannot be retrofitted with a Flushmate® System

Flushmate® Equipped Toilets

Flushmate 503 Series / 1.6 gpf

IMPORTANT: Gravity-fed toilets cannot be retrofitted with a Flushmate® System

Flushmate® Equipped Toilets

Flushmate 503 Series / 1.6 gpf

I-Flush™

I-Flush enables touchless, electronic sensor operation of existing Flushmate® units

Hands-free operations for hygienic convenience

Introducing I-Flush, a sleek and stylish solution for modern restrooms and the latest innovation in the company’s line of pressure-assisted restroom products. Packed with enhancements, the I-Flush offers improved touchless flushing operations to help reduce touch points and the spread of bacteria helps diminish recurring odors, and highlights the convenience of automatic flushing.

Design features

• Superior flushing with proven Infrared Object Lock Technology
• Easy to install on-wall sensor system
• Ideal for new 1.0, 1.28, or 1.6 gpf Flushmate systems or retrofitting to select Flushmate models
• Automatic calibration, flush delay (3 or 7 seconds), and 24-hour flush cycle
• Optional “hand wave only” actuation
• LED indication on detection and when the battery is low
• Sealed battery compartment
• Sensor trim available in chrome or white

Features and Benefits

• Battery-activated

• ADA compliant

• Infrared sensor technology ensures a
  complete flush after each use

• Adjustable sensor settings

• Ideal for applications where physical
  flushing is a concern

• Helps reduce odors

• 3 year expected battery life

• 1-year limited warranty

Certifications
ISO9001 Quality System Certified

**I-Flush Automatic Flushing System for 503, 503H, and 504 Series***

• I-Flush on-wall sensor, with chrome trim K-200101
• I-Flush on-wall sensor, with white trim K-200100
• I-Flush, with override button with NO sensor K-100500

Please contact [email protected] to confirm compatibility with OEM fixture before installation. Visit flushmate.com/resources for a complete list.

Flushmate® Replacement Systems

1. Identify Toilet Type
   One-piece or two-piece.

2. Identify Your Model and Serial Number
   The model and serial number are located on the top portion of the label adhered to the top of the Flushmate System. The middle characters (up to 5) in the serial number determine the replacement part needed.
   Locate your Serial Number
   Search the lists below for your serial number. The replacement part number is listed in bold above your serial number.

One-piece Toilets

• 504 Series 1.0 gpf
  • Model: M-102540-F4
• Replacement Part:
  • M-102540-F4M
  • Mansfield/Corona Only
  • F4M
  • M-102540-C
  • C01
• 503 Series 1.6 gpf
  • Model: M-102540-F3
• Replacement Part:
  • M-102540-FC
  • FC
  • FC1
  • M-102540-F3
  • F03B
  • M-102540-F3A
  • American Standard
  • F3A

Two-piece Toilets

Flushmate® Replacement Parts

Installation Packs & Parts

Actuation Kits & Parts

Universal Handle Replacement Kit for Flushmate III – 503 Series

Universal Handle Replacement Kit for Flushmate III – 503 Series

Cartridge Assembly

Use the Flushmate® Part Finder for serial numbers not listed or to find compatible replacement parts: flushmate.com/parts

Upgrade Kits

Switching to Flushmate® is simple. We’ve made it easy to replace other pressure-assisted brands to the Flushmate 1.6 gpf or 1.28 gpf systems.
Visit flushmate.com/products/upgrade-kits for a complete list of replacement models.

Flushmate III 503 Series Kit # M-101526-F31K (1.6 gpf)
Replaces

Gerber PF/2 Energizer 150-403 1.6 gpf
Fits these toilet models

Flushmate III 503H Series Kit # M-101526-F3H1K (1.28 gpf)
Replaces

WDI EcoFlush 1.1/1.6 gpf
Fits these toilet models

Tools

We have the right tools for the job.

• Flushmate® 3-in-1 Discharge Nut Wrench
• ST100100

• Cartridge Wrench
• ST100500

• Installation Tool Kit for Flushmate System Maintenance
• ST300500

Use the Flushmate Part Finder for serial numbers not listed or to find compatible replacement parts: flushmate.com/parts

Flushmate Upgrade Kit

One-kit Wonder
Replace your pressure-assisted system with Flushmate®.

Complete Flushmate System
Includes the Flushmate III, 1.6 gpf system for two-piece toilets.

Universal handle replacement
The new universal handle is designed for mounting on either left-handle or righthandle toilets.

Nuts and bolts
Kit includes locknuts, gaskets, and necessary tools.

Kit Includes

1. Frame and Lever 2. Handle 3. Bushing 4. Nut 5. Spacer
2. Screws (4) 7. Cassette 8. Cable with Barrel End and Disposable Cap

Prior to Installation

• Before removing the existing handle, note its orientation. The new handle should be installed facing the same direction.
• If you have a flush rod, clips, and screws, remove them before you start. Be careful not to drop parts into the tank.
• The existing and new nuts provided are left-hand threads (clockwise to loosen and counter-clockwise to tighten).

Handle Replacement Kit Instructions

1. To remove the handle, loosen the nut (inside the tank). It is a reverse thread. Pliers may be needed. Guide handle through the opening to completely remove
2. Place a black spacer on the bushing. Orient and insert as shown. If the bushing does not fit, remove the black spacer and re-insert the bushing.
3. Hand tightens nut snug around bushing (counter-clockwise).
4. Orient the new handle in the same direction as the original. Insert until stem extends past bushing, as shown. You will hear/ feel it click into place.
5. Gently remove the disposable cap from the barrel end of the cable and discard it.
6. Lift the lever and push the barrel end of the cable up through the hole on the underside of the frame until it clicks into place
7. Guide cable end into lever slot.
8. Raise the lever to seat the white barrel into the catch (you will hear it click).
9. Position the frame and lever with cable facing the front of the toilet tank (rest cassette on the side of the tank). Secure with (4) screws.
10. Match the handle icon (circled) on the cassette to the direction of the actual handle, and lift the handle to a horizontal position.
11. Maintain alignment of the cassette, and guide it down over protruding stem until it clicks into place. (Protruding stem is shown in step 4.)
12. Gently push the handle to test movement. If it doesn’t move properly, parts may be installed in the wrong orientation and you should verify that steps 2, 4, and 10 were completed correctly
13. To begin lever alignment, hold the actuator in place and loosen (but do not remove) the set screw.
14. Adjust actuator height. Turn UP (counter-clockwise) or DOWN (clockwise) to align the lever and frame.
15. The proper alignment of the lever and frame is shown above.
16. Once properly aligned, hold the actuator in place and tighten the set screw to secure it. Place toilet lid on the toilet tank.
    Installation complete

Common Adjustment s
Most troubleshooting issues can be resolved by common system adjustments of either the cartridge or the actuator.
Please review the following pages for step-by-step instructions.

Actuator Adjustments

1. Hold the actuator in place. Use a 4-in-1 tool to loosen the set screw by turning counter-clockwise, approximately 4 rotations. Do not remove the set screw.
2. 2 Adjust the actuator UP (counterclockwise) if there is too much travel in the push button, or if the toilet does not flush completely. Adjust the actuator DOWN (clockwise) if there is not enough travel in the push button, or if the toilet runs for more than 1 minute. Adjustment complete

Cartridge Adjustments YouTube Visit

1. Make sure the water supply stop is completely OPEN.

2. Hold the actuator in place. Use a 4-in-1 tool to loosen the set screw by turning counter-clockwise, approximately 4 rotations. Do not remove set screw. The toilet may flush during this step.

3. Unscrew and remove the actuator. Set aside to reinstall. Leave the set screw in place.

4. Use the end of the 3-in-1 wrench to turn the flush valve cartridge counter-clockwise until only 1 black thread of the vessel is showing.
   Visit flushmate.com/resources for cartridge adjustment video

5. After you complete raising the flush valve cartridge, confirm only 1 black thread of the vessel is showing.

6. Turn the flush valve cartridge clockwise ¼ turn. Listen for the water to stop running. If necessary, continue making ¼ turns, waiting 30 seconds between each turn, until water stops running.

7. Flush toilet twice, waiting 1 minute between flushes to test. Does the water stop running?

   • YES → Continue to step 8
   • NO → Repeat steps 4-7

8. Reinstall actuator. After 2 unsuccessful attempts, contact Flushmate at 800.533.3460.
   Adjustment complete

QR SCAN

Visit Our Website
Most questions can be quickly answered on the
Flushmate® website — download technical documents, watch instructional videos, and order replacement parts.
flushmate.com

Where to Buy
flushmate.com/distributors

Installation Videos
Find helpful instructional videos on the Product Support section of our website: flushmate.com/resources

Flushmate Part Finde r
The part finder helps to find replacement parts for your Flushmate system. flushmate.com/parts

Technical and Product Support
For information please email us at: [email protected]

Customer Support hours are Monday through Friday
9:00 AM – 5:00 PM EST
800.533.3460

CONTACT

• ADDRESS: 30075 Research Drive New Hudson, MI 48165
• TELL: 800.533.3460
• WEBB: flushmate.com

References

• WaterSense | US EPA
• Flushmate® | Power Flush, Pressure Assist Toilet Systems
• Where to Buy Flushmate® Toilets & Parts Near Me | Store Finder
• Find & Buy Flushmate® Repair Parts | Power Flush Toilets
• Flushmate® | Conversion Kit For PF/2™ and Ecoflush™ Toilet Systems
• Flushmate® | Customer Support, Installation Guides & Spec Sheets

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>