cecotec Bamba Ioni Care Rockstar Air Sonic Instruction Manual

cecotec Bamba Ioni Care Rockstar Air Sonic

Product Information

The Bamba IoniCare RockStar AirSonic is a high-performance hair dryer designed to provide efficient and quick hair drying results. It features advanced Ionicare technology for smooth and shiny hair.

Specifications

• Model: Bamba IoniCare RockStar AirSonic
• Power: 1800W
• Voltage: 220-240V AC, 50-60Hz

Key features:

• Powerful 1800W motor
• Ionicare technology for smooth and shiny hair
• Ergonomic design for comfortable handling
• Multiple heat and speed settings

Product Usage Instructions

Parts and Components
Before using the hair dryer, familiarize yourself with its parts and components as outlined in the user manual.

Before Use

• Ensure the hair dryer is plugged into a suitable power outlet.
• Adjust the heat and speed settings to your preference.

Operation

1. Turn on the hair dryer using the power button.
2. Select the desired heat and speed settings.
3. Hold the hair dryer at a suitable distance from your hair while drying.

Cleaning and Maintenance

• Regularly clean the air intake to prevent blockages.
• Store the hair dryer in a cool, dry place when not in use.

Technical Specifications
Refer to the specifications section above for detailed technical information.

FAQ

• Q: How do I dispose of my old Bamba IoniCare RockStar AirSonic hair dryer?
  A: To dispose of old electrical appliances, please follow local regulations for electronic waste disposal or contact technical support for guidance.

• Q: How do I contact technical support for warranty issues?
  A: For technical support and warranty inquiries, contact Cecotec at +34 963 210 728 or refer to the warranty information provided with your product.

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

• Ensure that the mains voltage matches the voltage specified on the device rating label and that the plug is earthed.
• This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• If the appliance is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the appliance switched off.
• As additional protection, it is recommended that a Residual Current Device (RCD) having a rated operating fault current not exceeding 30 mA be installed in the electrical circuit supplying the bathroom. We recommend you ask a qualified installer for advice.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the device. Cleaning and user maintenance must not be carried out by unsupervised children.
• This icon means that the appliance must not be used in a bathtub, shower, or any other water-filled tank.
• WARNING: do not use the device near bathtubs, showers, sinks, or other water-filled containers.
• Do not immerse the cable, plug, or any other non-removable part of the device in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the device.
• Check the power cable regularly for visible damage. If the cable is damaged, it must be replaced by the official Cecotec Technical Support Service to avoid any danger.
• Ensure that the air inlets and outlets are not blocked.
• Turn off and unplug the appliance from the power supply immediately after use.
• Unplug the appliance immediately under the following circumstances: abnormal operation, needs cleaning, and/or after use.
• Do not insert metal objects through the air inlets to avoid electric shocks.
• Do not wind the cable around the device.
• Keep your face, neck, and scalp away from the device.
• Do not leave the device on any surface while in operation.
• Do not use the appliance to dry wigs, natural hair extensions, fake hair nor animal hair.
• The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause overheating.
• Do not insert objects in the air inlet.

PARTS AND COMPONENTS

1. Temperature indicator light ring
2. Air temperature indicator light
3. Mode indicator lights
   • a. Baby mode
   • b. Normal mode
   • c. Quick dry mode
   • d. Pet mode
4. Change of mode button
5. Power/change of air speed switch
   • a. Off position
   • b. Low speed position
   • c. High speed position
6. Temperature-change button
7. Removable air inlet grille
8. Power cable
9. Concentrator nozzle
10. Diffuser

Note: the graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport.
• Take the device out of its box and remove all packaging materials.
• You can keep the original box and other packaging elements in a safe place.
• This will help you prevent damage to the device when transporting it in the future.
• In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions.
• If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box Content

• Bamba IoniCare RockStar AirSonic
• Concentrator nozzle
• Diffuser
• Instruction manual

OPERATION

1. Wash and condition your hair.
2. Dry your hair with a towel and comb it.
3. Install the concentrator nozzle on the front part of the dryer, if desired.
4. Plug the appliance into a power supply. Before plugging the appliance into the power supply, make sure that the power switch is always in the off position.
5. Switch on the appliance by sliding the switch and select the desired air speed.
6. Select the desired mode by pressing the change of mode button repeatedly.
7. Select the desired temperature level by pressing the temperature change button repeatedly. In baby and pet modes you can select between warm and hot air. In normal and quick dry modes, you can also select the option of cold air.
8. The temperature indicator light ring will illuminate blue for cold air, red for hot air and both colours for warm air (Fig. 2).
9. In either mode, press and hold the temperature button to activate the oscillating temperature. The light ring will change between the 3 colours to indicate the change of temperature.
10. Once you have finished using the appliance, switch it off and unplug it from the power supply.

Warning
If you notice that the appliance switches off or stops blowing hot air, then the overheating protection has been activated. In this case, unplug it from the power supply and allow it to cool down for a few minutes. Before switching it back on, make sure there are no fluffs, hair, or other objects blocking the air inlet grille.

CLEANING AND MAINTENANCE

• Disconnect the appliance from the power supply and allow it to cool down before cleaning.
• Use a soft, cotton cloth to clean the appliance inlets and outlets.
• Do not use sharp tools near the inlets and outlets of the appliance to avoid damage.
• Do not immerse the appliance in water or any other liquid and do not expose it to water while cleaning it.
• Do not use abrasive scouring pads, powders, or cleaners.
• You can remove the air inlet grille to clean it with a soft cloth. To do that:
  1. Make sure the hair dryer is switched off, unplugged, and has cooled down.
  2. With the hair dryer in an upright position, hold the handle of the dryer and pull the grille away from the handle.
  3. Clean the grille and the interior mesh carefully.
  4. Follow the reverse process to refit the grille. When the grille is placed in position, it will magnetically adhere to the handle of the dryer.

TROUBLESHOOTING

sure that the power cable is properly connected, confirm that there is no abnormality and turn the device back on.
Power switch in off position.| Make sure the power switch is in the on position.
Indicator light ring flashing white| The power cord is not properly plugged in.| Make sure that the power cable is properly connected, confirm that there is no abnormality and turn the device back on.
Defective power cable.| Contact the official Cecotec Technical Support Service.
Indicator light ring flashing yellow or red| ****

The air inlet or outlet is blocked.

| Check whether the air inlet or outlet is obstructed by fluff or hair, confirm that there is no abnormality and switch the device back on.
Internal heating elements light up red| The air inlet or outlet is blocked.| Check whether the air inlet or outlet is obstructed by fluff or hair, confirm that there is no abnormality and switch the device back on.
Defective heating wire.| Contact the official Cecotec Technical Support Service.

TECHNICAL SPECIFICATIONS

• Product reference: 04405
• Product: Bamba IoniCare RockStar AirSonic
• Power: 1800 W
• Voltage and frequency: 220-240 V~, 50-60 Hz

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.  Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries. Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations. It is recommended that repairs be carried out by qualified personnel. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

www.cecotec.es

Cecotec Innovaciones S.L.
Av. Reyes Católicos, 60 46910, Alfafar (Valencia) AP01230919

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>