soundcore A3947 Liberty 4 NC Noise Cancelling Earbuds User Guide
- June 12, 2024
- Soundcore
Table of Contents
soundcore A3947 Liberty 4 NC Noise Cancelling Earbuds User Guide
SUPPORT
Please visit www.soundcore.com/support
for more information.
APP
Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Download the soundcore app to enhance your experience (ambient sound modes, HearID sound, gaming mode, firmware update, and more).
WEARING
Choose the ear tips that fit your ears best and take a fit test in the
soundcore app to ensure you get the best ANC performance.
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging. For
wireless charging, position the charging case at the center of your wireless
charger.
POWERING ON & PAIRING
Open the charging case, the earbuds will automatically power on and enter
Bluetooth pairing mode. Select “soundcore Liberty 4 NC” from your device’s
Bluetooth list when connecting for the first time.
DUAL CONNECTIONS
The earbuds can connect with two devices at the same time so you can switch
between them effortlessly.
To pair with another device, wear the earbuds, then press and hold the
touchpad on both earbuds for 3 seconds simultaneously.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, place the earbuds in the charging
case and leave the case open. Press and hold the charging case button all the
way down for 3 seconds until the LED indicators flash white rapidly.
CONTROLS
×1: Tap once ×2: Tap twice 2s: Tap and hold for 2 seconds You can also
customize controls in the soundcore app
AMBIENT SOUND
You can select noise cancellation, normal, or transparency mode in the soundcore app.
- Adaptive ANC: Optimize noise cancellation by adapting to your ears and environment.
- Transparency: Stay aware of your surroundings while listening to music.
LDAC
Use devices powered by Android 8.0 or later to experience LDAC quality sound.
You can enable or disable LDAC using the soundcore app.
WEARING DETECTION
Playback will automatically pause when an earbud is removed and will resume
again once you wear it. Wear either earbud to automatically answer an incoming
call.
POWERING OFF
To power off, return the earbuds to the charging case and close it. The
earbuds will automatically power off after 30 minutes if they are not
connected.
Duration can be set in the soundcore app.
RESET
Place the earbuds in the charging case and leave the case open. Press and hold
the charging case button all the way down for 10 seconds until the LED
indicators flash white rapidly three times.
LED LIGHT GUIDE
Flashing red slowly
Flashing white slowly
Steady white
Flashing white rapidly
Steady red
Light off
References
- Soundcore EN
- Anker (アンカー) Japan 公式オンラインストア – Anker Japan 公式オンラインストア
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
- Soundcore EN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>