iRobot 4626194 Dirt Disposal Bag Instruction Manual
- June 1, 2024
- iRobot
Table of Contents
iRobot 4626194 Dirt Disposal Bag
Product Information
Specifications:
- Product Name: Clean BaseTM Dirt Disposal
- Manufacturer: iRobot
- Compatibility: Works with iRobot Roomba vacuum cleaners
- Replacement Bags: Available for purchase at iRobot Store or authorized retailers
Product Usage Instructions
Replacing Clean BaseTM Dirt Disposal Bag:
- Lift up the lid of the canister to open.
- Pull up on the plastic card leading to the vacuum port and lift up to pull the bag out of the canister. Note: This will seal the bag so no additional dust or debris can get out
- Discard the used bag.
- Place a new bag into the canister, sliding the plastic card into the guide rails.
- Press down on the lid making sure it is firmly closed.
Note: The solid red LED can also mean a bag is not being detected. Please ensure the bag is fully secured into your Clean BaseTM Automatic Dirt Disposal before closing the lid.
Note: To achieve optimal performance with your robot and Clean BaseTM, clean and/or replace your robot’s filter, as needed.
FAQ
- Q: Where can I purchase replacement bags for Clean BaseTM Dirt Disposal?
- A : Replacement bags can be purchased at the iRobot Store – Parts and Accessories or through authorized retailers.
- Q: What does a solid red LED on the Clean BaseTM Automatic Dirt Disposal indicate?
- A : A solid red LED indicates that the bag needs to be replaced. Follow the steps provided in the manual to replace the bag.
How do I replace the Clean Base™ Dirt Disposal bag?
To purchase replacement bags
Please visit the iRobot Store – Parts and Accessories or use an authorized retailer to order a part.
To replace a full bag
If there is a solid red LED lit up on your Clean Base™ Automatic Dirt Disposal, this means the bag will need to be replaced.
Follow these simple steps to replace the bag.
- Lift up the lid of the canister lid to open.
- Pull up on the plastic card leading to the vacuum port and lift up to pull the bag out of the canister.
- Note: This will seal the bag so no additional dust or debris can get out
- Discard the used bag.
- Place a new bag into the canister, sliding the plastic card into the guide rails.
- Press down on the lid making sure it is firmly closed.
- Note : The solid red LED can also mean a bag is not being detected. Please ensure the bag is fully secured into your Clean Base™ Automatic Dirt Disposal before closing the lid.
- Note : To achieve optimal performance with your robot and Clean Base™, clean and/or replace your robot’s filter, as needed.
References
Read User Manual Online (PDF format)
Loading......