logitech ZONE 300 Bluetooth On Ear Headset User Guide

logitech ZONE 300 Bluetooth On Ear Headset

Specifications:

• Adjustable headband
• Replaceable earpads
• Call button
• Volume controls
• Rotating noise-canceling microphone

Product Usage Instructions

Power On/Off:

1. Press the power button once to power on the headset.
2. Once powered on, the LED light will turn white.
3. There will be a voice prompt that tells you the battery status.

Connecting Your Headset:

1. Press and hold the power button for 2 seconds to enter pairing mode.
2. Repeat steps if you want to pair with another device.
3. You can pair with a maximum of 8 devices and connect to 2 devices simultaneously.

Adjusting Fit:

1. Slide the earcups up and down the headband until they sit comfortably on your ears.
2. Adjust the microphone boom up or down until it is leveled with your mouth for better voice capture.

Muting :

1. Flip up or down the mic boom to mute or unmute.
2. Voice prompts will indicate whether the microphone is muted or unmuted.

Charging:

1. Plug one end of the cable to the USB-C port on the bottom of the earcup and the other end into a power source.
2. The LED light will start breathing when charging and turn solid white when fully charged.
3. A 5-minute charge gives up to 1 hour of talk time, and a full charge takes around 2 hours.

Customizing with Logi Tune :
Take control of your music and meeting experience with Logi Tune. Adjust sidetone, mic level, and EQ for your preferred audio experience using the Logi Tune desktop or mobile app for Logitech headsets. Boost your headset performance with periodic software and firmware updates.

Auto Sleep Timer :
Your headset will automatically power off after 30 minutes of inactivity to conserve battery. Adjust the sleep timer in Logi Tune. Press the power switch again to wake up your headset

Reset Your Headset:

1. Power on the headset.
2. The LED light will blink from red to white three times, indicating a successful reset.

FAQ :

• Q: How do I know if my headset is fully charged?
  A: The LED light will turn solid white when fully charged.

• Q: Can I pair my headset with multiple devices ?
  A: Yes, you can pair with a maximum of 8 devices and connect to 2 devices simultaneously.

• Q: How long does it take to fully charge the headset?
  A: A full charge takes around 2 hours.

Setup Guide

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

1. Zone 300
2. USB-C charging cable
3. User documentation

POWER ON/OFF

1. Press the power button once to power on the headset.
2. Once powered on, the LED light will turn white.
3. There will be a voice prompt that tells you the battery status.

CONNECTING YOUR HEADSET

1. Long press the power button on earcup until LED indicator starts blinking to initiate Bluetooth® pairing.

2. In your computer or mobile device’s Bluetooth® settings, select “Zone 300” in discoverable devices.
   If you are using Windows 10 or later, a notification will pop up when you place the headset close to your computer. Click “Connect”.

3. Repeat steps 1 and 2 if you want to pair with another device. You can pair with a maximum of 8 devices and connect to 2 devices simultaneously.

ADJUSTING FIT

1. It may be easier to adjust the headsets on your head. Slide the earcups up and down the headband until they sit comfortably on your ears.
2. Move the microphone boom up or down until it is leveled with your mouth for better voice capture.

MUTING

1. Flip up or down the mic boom to mute or unmute.
2. You will hear voice prompts that indicate whether the microphone is muted or unmuted.

CHARGING

The LED light on the headset will become red when the battery is lower than 10%.

1. Plug one end of the cable to the USB-C port  on the bottom of the earcup and the other end into the USB-C charging port on your computer or a power adapter.

2. The LED light will start breathing when charging.

3. The LED light will turn solid white when fully charged.
   A 5-minute charge will give you up to 1 hour of talk time3, and a full charge takes around 2 hours.

4. The headset can be used with Bluetooth® paired while charging.

CUSTOMIZING WITH LOGI TUNE

Take control of your music and meeting experience with Logi Tune. Adjust sidetone, mic level, and EQ for your preferred audio experience using the Logi Tune desktop or mobile app for Logitech headsets.
It is also recommended to boost your headset performance with periodic software and firmware updates.
ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking. In Logi Tune, select the sidetone feature, and adjust the dial accordingly.

• A higher number means you hear more external sound.
• A lower number means you hear less external sound.

AUTO SLEEP TIMER

By default, your headset will automatically power off when not in use for 30 minutes to conserve battery. Adjust the sleep timer in Logi Tune. To wake up your headset, try press the power switch again.

RESET YOUR HEADSET

1. Power the headset on.
2. Press and hold the call button and volume “–” button for 5 seconds.
3. The LED light will quickly blink from red to white for 3 times and then turns off when your headset is successfully reset
4. The headset will turn off after reset

BUTTON CONTROLS

| Usage| Button| Action|
---|---|---|---|---
Call controls| Answer / End call| Call button| Short press|
Reject call| 1 5 sec press|
Resume call|
Short press|
**Volume| Volume up| “+”| Short press|
Volume down| “-“| Short press|
Connectivity**| Bluetooth ® pairing| Power button| 2 sec press|

LED LIGHT INDICATORS

Note: User-triggered behaviors, such as Bluetooth® pairing, will be prioritized; The light indicator will then revert back to its previous status once the behavior is completed

DIMENSIONS

• Headset:
  • Height: 172 84 mm (6 8 in)
  • Width: 166 71 mm (6 6 in)
  • Depth: 66 mm (2 6 in)
  • Weight: 122 g (4 3 oz)
• Earpad:
  • Height: 66 mm (2 6 in)
  • Width: 66 mm (2 6 in)
  • Depth: 16 mm (0 63 in)

COMPATIBILITY

• Works with Windows, macOS, ChromeOS2, Linux2, iOS, iPadOS, or Android devices via Bluetooth®
• Compatible with common calling applications

TECHNICAL SPECIFICATIONS

• Microphone Type: Dual beamforming mics  with noise-canceling algorithms
• Frequency response (Speaker): 50-20 kHz (music mode), 100-7 kHz (talk mode)
• Frequency response (Microphone): 100-7 kHz Listening time: Up to 16 hrs3
• Talk time: Up to 20 hrs3
• Bluetooth® versio n: 5 3
• Wireless range: Up to 30 m / 98 ft4
• Charging cable length : 1 m

FOOTNOTE

1. The headset currently supports voice prompts in the following  languages: English, French, German, Italian, Spanish, and Portuguese You can choose your preferred language in the Logi Tune app
2. Device basic functions will be supported for operating systems that do not support Logi Tune. Check Logi Tune compatibility on logi.com/tune.
3. Battery life may vary based on user and computing conditions.
4. Open field line of sight. Wireless range may vary depending on the operating environment and computer setup.

www.logitech.com/support/zone300

© 2024 Logitech. Logitech, Logi, Zone, and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. or its affiliates in the U.S. and/or other countries. Windows is
a trademark of Microsoft Inc., registered in the U.S. and other countries. Apple, the Apple logo, Mac and iOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc. Android, ChromeOS, Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. USB-C is
a trademark of USB Implementers Forum. All other third party trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
WEB-621-002438 00A

References

• Logi Tune Software
• Logitech Support + Download

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>