espiro 20210729 Fuel Lightweight Strollers User Manual

: June 1, 2024
: espiro

Table of Contents

espiro 20210729 Fuel Lightweight Strollers
OVERVIEW
USING INSTRUCTION
ASSEMBLY OF FRONT AND REAR WHEELS
CLEANING AND OPERATING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

espiro 20210729 Fuel Lightweight Strollers

espiro-20210729-Fuel-Lightweight-Strollers-PRODUCT

OVERVIEW

espiro-20210729-Fuel-Lightweight-Strollers-FIG-1

USING INSTRUCTION

Silica gel packets inside. Do not swallow. Discard after unwrapping the product.
ATTENTION! Correctly mounted shoulder straps (1) should be located slightly above the child’s shoulders, and the hip straps (2) should tightly hold the child’s pelvis. Straos cannot be twisted.

DEAR PARENTS
Congratulations on your purchase of the WAVE stroller manufactured by the company BABY DESIGN GROUP. The journey in this stroller will be safe, comfortable and enjoyable.

Important- Read carefully and keep it for future reference Your child’s safety may be threatened if you do not follow these instructions!

ELEMENTS OF THE STROLLER

Stroller frame with upholstery 2. Canopy 3. Bumper bar 4. Basket 5. Rear wheel – 2 pcs 6. Front-wheel – 2 pcs 7. Footmuff
UNFOLDING THE STROLLER
Unlock the snap fastener of the locking mechanism.
Unfold the stroller pulling the handle up until locks on both sides of the stroller are locked in place.
NOTE: Make sure the stroller is properly unfolded.

ASSEMBLY OF FRONT AND REAR WHEELS

ASSEMBLY OF FRONT WHEELS
Insert the front set of the wheel onto the hub until it is locked in place. Make sure the wheel is properly secured. Repeat on the other side.

ASSEMBLY OF THE REAR WHEELS
Insert the rear wheel onto the rear hub until it is locked in place. Make sure the wheel is properly secured. Repeat on the other side.

DISASSEMBLY OF THE FRONT WHEELS
Press the button of the locking mechanism (1) and simultaneously take the wheel off the hub (2).

DISASSEMBLY OF THE REAR WHEELS
Press the button of the locking mechanism (1) and simultaneously take the wheel off the hub (2).

FRONT SWIVELING WHEELS
Move the locking mechanism down to lock the front swivelling wheels. Move the locking mechanism up to unlock the front wheel.

NOTE: Swiveling wheels must be unlocked before moving the stroller backwards!!! Failure to observe instructions for the swivelling wheels may result in mechanical damage to the steering elements, which are not subject to complaint.

BUMPER BAR

To assemble the bumper bar, insert it on plastic openings on both sides of the stroller frame. Make sure the bumper bar is properly secured against sliding out.
To detach the bumper bar, press the button located on the outside of the bumper bar at the same time (1) and take it off the openings in the frame of the stroller (2).

FOOTREST ADJUSTMENT

To lift the footrest, lift its end part.
To lower the footrest, simultaneously press the buttons on both sides (1) and lower the footrest (2).

CANOPY: ASSEMBLY AND OPERATION

Assemble the endings of the canopy on the plastic elements of the guide bar and attach the canopy to the upholstery with snap fasteners.
To change the position of the canopy, hold its top part and adjust it to the required position.
HANDLE ADJUSTMENTSimultaneously press both buttons on both sides of the handle and adjust it to the required position.

BACKREST ADJUSTMENT

To lift the backrest, hold the belt of the adjusting mechanism (1) and push the backrest to the required position (2)
To lower the backrest, press the button of the adjusting mechanism (1) and simultaneously lower the backrest to the required position (2).
PARKING DEVICE (brake) Press the brake pedal with the foot to lock the rear wheels. Lift the brake pedal with the foot to unlock the rear wheels.

FOLDING THE STROLLER

Unlock the front wheels, lower the backrest and fold the canopy. Move the locking mechanism of the folding button to the right (1) and press the folding mechanism of the stroller (2). Push the handle forward at the same time (3).
Make sure that the locking mechanism secured the stroller against accidental unfolding.

SAFETY BELTS
Lock the belts with the buckle (1 ). Adjust the length of the straps with buckles (2).

ASSEMBLY/ ADJUSTMENT OF THE SAFETY BELTS HEIGHT
To assemble I To adjust the height of the seat belts, take them out of the openings in the backrest/seat unit and the upholstery and insert them through openings in the upholstery and the seat unit/backrest at the desired height.

NOTE! Before locking the child with the seat belts, make sure that the seat belts are properly assembled. 23c In case of use of additional harnesses, mount them to the harness attachment points, located on both sides of the seat rest

FOOTMUFF Insert the footmuff on the footrest and fix it with snap fasteners placing it upper part over the bumper bar.

CLEANING AND OPERATING

Plastic parts of the stroller and stripes may be cleaned with a soft, damp cloth. Do not use aggressive cleaning agents. Clean metal parts with dry cloth removing dust and water. If the stroller gets muddy or after its use during winter, maintain it with the use of lubricating products. Upholstery cleaning manual: – Clean using a cloth with a mild cleaning agent, do not wet it, do not whirl, dry unfolded. Check periodically if screws did not get loose and replace damaged parts. Lubricate riding elements, i.e. wheels hubs and axes using common products, eg. silicone grease. It should be done especially after using the stroller on sandy ground or during winter. Aggressive agents may cause corrosion. Remember to maintain all metal elements.

WARNING

IMPORTANT- READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING Never leave the child unattended
WARNING Ensure that all the locking devices are engaged before use
WARNING To avoid injury ensure that your child is kept away when unfolding and folding this product.
WARNING Do not let the child play with this product
WARNING Always use the restraint system
WARNING Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use
WARNING This product is not suitable for running or skating
Maximum weight and age of the child for which the vehicle is suitable: 22 kg or 4 years whichever comes first.
Foor newborn babies, it is recommended to use the most reclined position of the backrest.
The parking device (brake) should be activated when putting the child in or taking the child out of the stroller
When parking the stroller, always activate the brake (parking device),
The maximum load of the basket is 3 kg.
The maximum load of the pocket of the canopy/carrycot is 0.3 kg.
Any load on the handle and/or posterior part of the backrest and/or sides of the stroller will influence the stability of the stroller
Do not hang bags that are not appropriate for hanging or bags different than recommended by the manufacturer on the stroller’s guides -it is dangerous and may lead to damage to the stroller.
This stroller is intended for use by one child. -Do not use accessories that are not approved by the manufacturer. Use only spare parts which are approved or recommended by the manufacturer.
Do not use additional ich that are not approved by the manufacturer. Use only spare parts which are approved or recommended by the manufacturer.
Do not use additional platforms attached to the stroller.
In the event any defects are detected, do not use the product and contact the service of Baby Design Group of the seller.
Never go down or up the stairs with the stroller (also on slides), especially with a child inside – it may lead to serious injury to the child and damage to the stroller.
Rocking the stroller may deteriorate its structure and lead to damage. – Never lift or move the product with the child inside it.
Make sure folding elements are locked before using the stroller (that it is properly unfolded and locked in place).
Always assemble all protective and securing elements of the stroller in compliance with instructions.
Always attach the crotch belt to the bumper bar.
Check periodically if all elements of the stroller are operational and safe, in particular, check if the seat unit, carrycot and car seat are properly assembled to the chassis.
When folding and unfolding the stroller, as well as when adjusting the backrest, handle or other elements of the stroller, keep your and your child’s body parts safe.
The stroller is intended for moving forward.
Baby Design Group sp. Z o.o. sp. K. is not liable for any damage to property or injuries arising from the assembly and use of the product which is not compliant with instructions and recommendations of the manufacturer covered by this user manual.
Use only elements supplied or recommended by the manufacturer/distributor.
Upholstery cleaning manual:
Clean using a cloth with a mild cleaning agent, do not wet it, do not whirl, and dry unfolded.
Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
Washers, which are a part of the set, are intended to balance any loose between the axis of the front wheel set and the hub. Keep washers away from children’s risk of swallowing.