espiro TULLY Glide & Go 3 in 1 Crib User Manual
- June 17, 2024
- espiro
Table of Contents
Glide & Go 3 in 1 Crib
TRAVEL COT WITH THE ROCKING FUNCTION 3 in1
User Manual
TULLY Glide & Go 3 in 1 Crib
Silica gel packets inside. Do not swallow. Discard after unwrapping the product. |
DEAR PARENTS congratulations on your purchase of the 3 in 1 bedside crib
of the company BDG PRODUKCJA.
Your child will most certainly sleep feeling safe and comfortable, and will
enjoy it.
IMPORTANT – KEEP FOR FUTURE REFERENCE. READ CAREFULLY
ELEMENTS :
- Carrycot,
- Support,
- Support,
- Fixing handle,
- Fixing bars.
- Bracket,
- Mattress,
- Bag
UNFOLDING THE COT
-
Place the supports into the fixing handle.
-
The support should be directed with the locking mechanism facing inside of the cot. Insert the support into the openings of the fixing handle until you hear the clicking sound of the locking mechanism. Repeat on each end of the handle.
-
The fixing handle is equipped with bars connectors that connect the entire structure of the cot.
-
Insert the ends of the bars into the connectors of the cot structure until you hear the clicking sound.
To disassemble the bars connecting the cot structure move the locking mechanism (1) to the inside of the cot and take the connecting bars (2) out of the fixing handle. Repeat on each end of the connecting bar. -
after assembling the connecting bars, the frame can be placed on the ground.
-
To ensure maximum stability of the frame, it is required to assemble two brackets.
-
The brackets are equipped with two handles on each of their ends, which should be inserted into the sockets on the supports until you hear the clicking sound.
UNFOLDING THE CARRYCOT -
The carrycot can be unfolded using two brackets. It is enough to move them to the outside until the locking mechanism is secured in place.
-
After unfolding the carrycot, make sure the fabric is properly stretched.
-
The cot is equipped in the mattress. Place the mattress inside the carrycot.
COT USER MANUAL -
Place the carrycot on the frame. The carrycot is equipped with elements used to fix it to the frame. After inserting it onto the frame, you will hear the clicking sound of two locking mechanisms.
-
Note: Before putting the child inside the carrycot, make sure the basis is properly fixed to the frame.
-
The cot is equipped with the rocking function that can be blocked.
To block and release this function, use the buttons located on both sides of the fixing handle. To block the rocking function of the carrycot, press the button marked with a locked padlock. -
To release the rocking function of the carrycot, press the button marked with unlocked padlock.
DISASSEMBLY OF THE CARRYCOT -
The carrycot can be disassembled from the frame using two handles located on the shorter sides of the cot. They are also used to carry the carrycot.
To disassemble the carrycot, lift both handles at the same time. This way, the carrycot will be disconnected from the frame.
Note: Never disassemble or carry the the carrycot with the child inside of it
FOLDING THE COT FOR TRANSPORT
The cot can be easily folded to transport it to another place. -
Disassemble the carrycot from the frame.
-
disassemble the brackets.
-
disassemble the connecting bars.
-
take the supports out of the fixing handles.
Note: the cot can be transported in the bag without disassembled brackets. -
Take the mattress out of the carrycot.
-
fold the carrycot moving the brackets inside the carrycot
-
Bag in which all elements of the cot can be packed is used to transport the product. The bag is a part of the set..
**** CLEANING AND OPERATION
Plastic parts of the baby cot can be cleaned with a soft, damp cloth. Do not
use strong washing agents.
Clean metal parts with a dry cloth, removing dust and water.
The upholstery and mattress of the baby cot may only be hand washed at 30
degrees using gentle washing agents, best washing iquids.
Check periodically if all elements of the baby cot are operational and safe.
Do not use the baby cot if any element is missing or in case any element is
damaged or torn.
NOTE
– Long exposure of the baby cot to sunlight may cause fading of fabrics.
Complaints arising from the above will not be accepted.
– Do not leave the baby cot nearby the sources of heat (heaters, blowers,
etc.). t0 may cause damage to plastic parts.
– To ensure you are satisfied with the quality our product, Baby Design Group
Sp z o.o. sp. k. reserves the right to make changes in the design of the cot
without the obligation to inform buyers.
– Repairs due to negligence in care for the product will be performed against
fee
– BABY DESIGN GROUP SP. Z 0.0. SP. K. is not iable for any damage to property
or injuries arising from the assembly and use of the product, including its
protective and securing elements, which is not compliant with instructions and
recommendations of the manufacturer covered by this user manual.
**** WARNING
IMPORTANT: KEEP FOR FUTURE REFERENCE.
WARNING – Do not place the crib nearby sources of open fire or other
sources of heat.
WARNING – Before putting the baby inside the carrycot make sure it is
properly unfolded and all its locking mechanisms are engaged.
The carrycot is intended for children aged 0 months to 6 years old with
maximum body weight of the child up to 9 kg.
WARNING – Do not use the cot when the child is able to sit unattended,
stand up or crawl.
NOTE – Do not allow the child to play with the product.
NOTE – Do not use the product is any part is broken, ripped or missing.
NOTE – Do not use the cot cot if any element is damaged, torn, or if any
part is missing. Use only elements which are approved by the manufacturer. Do
not use accessories (Spare parts) which are not approved by the manufacturer.
NOTE – Use the mattress delivered in the set. Never use additional
mattress. Suffocation hazard.
NOTE – overloading or using additional elements may cause damage.
NOTE – Never carry the the carrycot with the child inside of it.
WARNING – Be aware of risk connected with placing the product nearby
sources of open fire and other sources of strong heat, such as electric
heaters, gas burners, etc. EN 16890:2017
WARNING – Do not use the product before reading its user manual.
WARNING – Do not use the product if your child can seat unattended, kneel
or stand up.
WARNING – Placing additional elements in the product can lead to
injuries.
Do not leave any objects in the cot and do not place it near another equipment
which could be used as a support for the foot or which could cause danger of
suffocation or hanging of the child, e.g. wires, curtains/blinds strings.
WARNING – Use only mattress which is sold with this baby cot.
Do not place additional mattress as there is a risk of suffocation.
Contact BGD Produkcja to get spare parts and their assembly instructions (if
needed).
Do not use elements which are not approved by the manufacturer.
Do not use the cot if the floor is inclined.
The product is intended for use by one child only.
Never leave your child unattended.
Do not allow the child to climb on it.
If the product falls on the child, it can lead to serious injuries.
Before each use of the product, make sure that it is fully functional and that
all the functions work properly. If defects are found, do not use the product
and contact the service of BDG PRODUKCIA. Be careful not to injure your
fingers when folding and unfolding the product.
Do not place the product on any platform.
Do not place the product nearby any electric sockets, hanging wires, table
with a tablecloth on it, etc.
Never use the product without the mattress or the upholstery – they are its
integral part.
BGD PRODUKCIA is not liable for any damage in the property or injuries arising
from the assembly and use of the product which is not compliant with
instructions and recommendations of the manufacturer covered by this user
manual. Always assemble all protective and securing elements of the product in
compliance with the user manual.
To ensure maximum safety to the child, keep the child away from movable
elements of the product when folding and unfolding.
THE PRODUCT IS COMPLIANT WITH EN 1130:2019 and EN16890:2017
BDG PRODUKCJA SP.Z.0.0.
Ul. Warszawska 8 42 — 262 Poczosna
POLAND
Tel. +48 (34) 360 46 64, +48 (34) 360 46 53
Tel. serwis +48 (34) 364 36 41 E-
mail: buro@babydesign.eu
E- mail scrwis: serwis@oabycsign.cu