espiro M9_Q_20210715 Lightweight Strollers User Manual

: June 13, 2024
: espiro

Table of Contents

espiro M9_Q_20210715 Lightweight Strollers
Installation
CLEANING AND OPERATING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

espiro M9_Q_20210715 Lightweight Strollers

Packets inside

Silica gel packets inside. Do not swallow. Discard after unwrapping the product.

ATTENTION! Correctly mounted shoulder straps (1) should be located slightly above the child’s shoulders, and the hip straps (2) should tightly hold the child’s pelvis. Straps cannot be twisted

DEAR PARENTS

Congratulations on your purchase of the children stroller JUST the company BDG PRODUKCJA SP. Z.O.O Travelling in it will most certainly be safe, comfortable
and enjoyable.

Installation

IMPORTANT: READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE

A. ELEMENTS OF THE STROLLER

Stroller frame with cover
Bumper bar
Canopy
Front wheel – 2 pcs.
Rear wheel – 2 pcs.
Footmuff

UNFOLDING THE STROLLER

B. Press the locking mechanism blockade (1), then press the locking mechanism (2) located on the stroller handle. Lift the handle.
C. Unfold the stroller pulling the handle up until locks on both sides of the stroller are locked in place.

NOTE! Make sure that the stroller is properly unfolded.

ASSEMBLY OF FRONT AND REAR WHEELS

D. ASSEMBLY OF THE FRONT WHEELS

Insert front set of the wheel onto the hub until it is locked in place (you will hear a clear click sound). Make sure the wheel is properly secured. Repeat on the other side.

E. ASSEMBLY OF THE REAR WHEELS

Insert the protruding axle of the rear wheel onto the rear hub of the stroller. Make sure the wheel is properly secured. Repeat on the other side.

ASSEMBLY OF THE BUMPER BAR

F. To assemble the bumper bar, insert the bumper bar assembly element into the opening of the bumper bar assembly mechanism located in the frame of the stroller. Repeat on the other side.
K. To detach the bumper bar, press the button of locking mechanism (1) and detach it from the opening of the bumper bar assembly mechanism (2). Repeat on the other side

BRAKE OPERATION (PARKING DEVICE)

H. Lift the lever to unlock the rear wheels.
I. Lower the lever to lock the rear wheels.

BACKREST ADJUSTMENT

J. To lower the backrest, lower the buttons of the backrest locking mechanism (1) and simultaneously lower the backrest (2) to the desired position.
K. To lift the backrest, hold the end of the belt of the adjusting mechanism (1) and simultaneously push the backrest to the required position (2).

CANOPY MANUAL

L. To change the position of the canopy, hold its top part and adjust it to the required position.
M. To additionally enlarge the canopy, unzip the zipper in its middle part (1) and pull the canopy to the front (2).

FOOTREST ADJUSTMENT

N. To lower the footrest, press both buttons of the locking mechanism located under the footrest (1) and lower it (2).
0. To lift the footrest, lift its end part
DISASSEMBLY OF THE WHEELS
P. DISASSEMBLY OF THE FRONT WHEELS

Press the button of the locking mechanism (1) and simultaneously take the front wheel off the hub (2).

Q. DISASSEMBLY OF THE REAR WHEELS Press the button of the locking mechanism (1) and simultaneously take the front wheel off the hub (2).

FOLDING THE STROLLER

R. Press the locking mechanism blockade (1 ), then press the button of the locking mechanism (2) located on the stroller handle. Push the handle forward.
S. Make sure that the stroller is properly secured against accidental unfolding.

SEAT BELTS MANUAL

T. Insert each belt into the buckle and then adjust its length adjusting it to the body of the child. To unbuckle the buckle, press the button located in its middle part
U. ASSEMBLY/ ADJUSTMENT OF THE SAFETY BELTS HEIGHT

To assemble/ adjust the height of the seat belts, take them out of the openings in the backrest/seat unit and the upholstery and then insert through openings in the upholstery and the seat unit/backrest at the desired height.

NOTE! Before locking the child with the seat belts, make sure that the seat belts are properly assembled in the stroller.

FOOTMUFF

V. To assemble the cover on the frame of the stroller, insert its lower part onto the footrest and then fix the snap fasteners of the belts with the snap fasteners located on the sides of the upholstery.

Warning

CLEANING AND OPERATING

Plastic parts of the stroller and stripes may be cleaned with soft, damp cloth. Do not use aggressive cleaning agents. Clean metal parts with dry cloth removing dust and water. If the stroller gets muddy or after its use during winter, maintain it with use of lubricating products. Stroller upholstery may only be hand washed in temperature of 30°C with use of soft cleaning agents and laundry liquid. Do not whirl or dry in a drier. Check periodically if screws did not get loose and replace damage parts. Lubricate riding elements, i.e. wheels hubs and axes using common products. It should be done especially after using the stroller on sandy ground or during winter. Aggressive agents may cause corrosion. Remember to maintain all metal elements.

WARNING

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING Never leave your child unattended
WARNING Ensure that all the locking devices are engaged before use
WARNING To avoid injury ensure that your child is kept away when unfolding and folding this product.
WARNING Do not let the child play with this product
WARNING Always use the restraint system
WARNING Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use
WARNING This product is not suitable for running or skating
Maximum weight and age of the child for which the vehicle is suitable: 22 kg or 4 years whichever comes first.
Parking device (brake) should be activated when putting the child in or taking the child out of the stroller – When parking the stroller, always activate the brake (parking device), – Maxim load of the basket is 3 kg. – Maximum load of pocket of the canopy/carrycot is 0.3 kg. -Any load on the handle and/or posterior part of the backrest and/or sides of the stroller will influencestability of the stroller – Do not hang bags which are not appropriate for hanging or bags different than recommended by the manufacturer on the stroller’s guides – it is dangerous and may lead to damage to the stroller. – This stroller is intended for use by one child.
Do not use accessories which are not approved by the manufacturer. Use only spare parts which are approved or recommended by the manufacturer. – Do not use additional platforms attached to the stroller.
In the event any defects are detected, do not use the product and contact the service of of the seller. – Never go down or up the stairs with the stroller (also on slides), especially with a child inside – it may lead to serious injury to the child and damage to the stroller. – Rockingthe stroller may deteriorate its structure and lead to damage. – Never lift or move the product with the child inside it. – Make sure folding elements are locked prior to using the stroller (that is is properly unfolded and locked in place). -Always assemble all protective and securing elements of the stroller in compliance with instructions. – Always attach the crotch belt on the bumper bar. – Check periodically if all elements of the stroller are operational and safe, in particular check if the seat unit, carrycot and the car seat are properly assembled to the chassis. – When folding and unfolding the stroller, as well as when adjusting the backrest, handle or other elements of the stroller, keep your and your child’s body parts safe.
The stroller is intended for moving forward. is not liable for any damage to property or injuries arising from the assembly and use of the product which is not compliant with instructions and recommendations of the manufacturer covered by this user manual.
Use only elements supplied or recommended by the manufacturer/distributor. Upholstery cleaning manual: – Clean using a cloth with mild cleaning agent, do not wet it, do not whirl, dry unfolded.
Be aware of the risk of open fire and other sourced of strong heat in the vicinity of the product. – You may assemble the carrycot, seat unit, or the car seat on the stroller’s frame. Carrycot: – Do not use any additional mattress than the one recommended by the manufacturer. – This product is suitable for children who cannot sit up unaided, roll over and cannot push itself up on hands and knees. Maximum weight of the child: 9kg.
Handles for carrying should be placed outside the carrycot when using it.

Car seat: – Car seat does not substitute cradle or baby cot. If your child wants to sleep, put it inside and appropriate carrycot, cradle or baby cot.

UI. Warszawska 8 42 – 262 Poczesna POLAND