espiro Fuel Lightweight Strollers User Manual

June 9, 2024
espiro

espiro Fuel LOGO **Lightweight Strollers
User Manualespiro Fuel Lightweight Strollerswww.espiro.pl**

Fuel Lightweight Strollers

espiro Fuel Lightweight Strollers - FIGURE 1| espiro Fuel Lightweight Strollers - FIGURE 2
---|---
espiro Fuel Lightweight Strollers - FIGURE 3| espiro Fuel Lightweight Strollers - FIGURE 4

espiro Fuel Lightweight Strollers - FIGURE 5

Silica gel packets inside. Do not swallow. Discard after unwrapping the product.

espiro Fuel Lightweight Strollers - FIGURE 6

ATTENTION! Correctly mounted shoulder straps (1) should be located slightly above the child’s shoulders, and the hip straps (2) should tightly hold the child’s pelvis. Straps cannot be twisted

espiro Fuel Lightweight Strollers - FIGURE 7

DEAR PARENTS
Congratulations on your purchase of FUEL stroller manufactured by the company BDG PRODUKCJA SR Z O.O. Journey in this stroller will be safe, comfort and enjoyable.
Important – Read carefully and keep for future reference
Your child’s safety may be threatened if you do not follow these instructions!
1. ELEMENTS OF THE STROLLER
1. Stroller frame with upholstery 2. Can pcs 6. Front wheel — 2 pcs 7. Footmuffopy 3. Bumper bar 4. Basket 5. Rear wheel — 2
UNFOLDING THE STROLLER
2. Unlock the stroller by moving the locking mechanism of the folding button to the right (1) and press the folding mechanism of the stroller (2).
3. Unfold the stroller pulling the handle up until locks on both sides of the stroller are locked in place.
NOTE: Make sure the stroller is properly unfolded.
ASSEMBLY OF THE REAR WHEELS
4. Insert the rear wheel onto the hub until it is locked in place. Make sure the wheel is properly secured.
DISASSEMBLY OF THE REAR WHEELS
5. Press the button of the locking mechanism (1) and simultaneously take the front wheel off the hub (2).
BUMPER BAR
6. To assemble the bumper bar, insert it into plastic openings on both sides of the stroller frame until you hear the sound of the locking mechanism.
Repeat on the other side. Make sure the bumper bar is properly secured against sliding out.
7. To detach the bumper bar, press the button of locking mechanism (1) and detach it from the openings in the stroller frame (2)
FOOTREST ADJUSTMENT
8. To lift the footrest, lift its end part. 9. To lower the footrest, move the handle of the locking mechanism and lower the footrest.
BACKREST ADJUSTMENT
10. To lift the backrest, move it to the required position.
11. To lower the backrest, lift the handle of the locking mechanism and move the backrest to desired position.
CANOPY MANUAL
It is possible to adjust the position of the canopy by locking it in a place with a zipper.
12. To enlarge the canopy, unzip the zipper.
13. To change the position of the canopy, hold its top part and adjust it to the required position.
PARKING DEVICE (brake)
14. Press the brake pedal with the foot to lock the rear wheels.
15. Press the brake pedal with the foot to lock the rear wheels
VENTILATION
16. Remove the zippers from the ventilation (1). Roll the fabric and attach it to the upper edge of the canopy (2).
FOLDING THE STROLLER
NOTE:
The stroller is equipped with the automatic folding mechanism.
17. Move the locking mechanism of the folding button to the right (1) and press the folding mechanism (2). Push the handle forward at the same time (3).
18. The stroller will fol automatically.
SAFETY BELTS
19. Fasten the safety belts with the buckle (1). Adjust the length of the straps with buckles (2)
ASSEMBLY / ADJUSTMENT OF THE SAFETY BELTS HEIGHT
20. To assemble / adjust the height of the seat belts, take their endings out of the openings in the backrest/seat unit and the upholstery and insert through openings in the upholstery and the seat unit/backrest at the desired height.
NOTE: Before locking the child with the seat belts, make sure that the seat belts are properly assembled.
21. To use an additional harness, fix it on plastic rings located on both sides of the seat unit.
INSERT
22. Place the insert on the seat stroller. Insert the straps through the openings in the isert.
COVER
23. Insert the cover on the footrest and attach it to the insert with a zipper. 24. Attach it with press studs on both sides of the seat unit.
To disassemble the insert/cover, proceed in reverse order.

CLEANING AND OPERATING

Plastic parts of the stroller and stripes may be cleaned with soft, damp cloth. Do not use aggressive cleaning agents.
Clean metal parts with dry cloth removing dust and water. If the stroller gets muddy or after its use during winter, maintain it with use of lubricating products.
Upholstery cleaning manual: – Clean using a cloth with mild cleaning agent, do not wet it, do not whirl, dry unfolded.
Check periodically if screws did not get loose and replace damage parts. Lubricate riding elements, i.e. wheels hubs and axes using common products, eg. silicone grease.
It should be done especially after using the stroller on sandy ground or during winter. Aggressive agents may cause corrosion. Remember to maintain all metal elements.

WARNING
IMPORTANT
— READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING Never leave the child unattended
WARNING Ensure that all the locking devices are engaged before use
WARNING To avoid injury ensure that your child is kept away when unfolding and folding this product.
WARNING Do not let the child play with this product
WARNING Always use the restraint system
WARNING Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use
WARNING This product is not suitable for running or skating
– Maximum weight and age of the child for which the vehicle is suitable: 22 kg or 4 years whichever comes first.
– Foor new born babies it is recommended to use the most reclined position of backrest.
– Parking device (brake) should be activated when putting the child in or taking the child out of the stroller
– When parking the stroller, always activate the brake (parking device),
– Maxim load of the basket is 3 kg.
– Maximum load of pocket of the canopy/carrycot is 0.3 kg.
– Any load on the handle and/or posterior part of the backrest and/or sides of the stroller will influence stability of the stroller
– Do not hang bags which are not appropriate for hanging or bags different than recommended by the manufacturer on the stroller’s guides
– it is dangerous and may lead to damage to the stroller.
– This stroller is intended for use by one child.
– Do not use accessories which are not approved by the manufacturer. Use only spare parts which are approved or recommended by the manufacturer.
– Do not use additional ich are not approved by the manufacturer. Use only spare parts which are approved or recommended by the manufacturer.
– Do not use additional platforms attached to the stroller.
– In the event any defects are detected, do not use the product and contact the service of Baby Design Group of the seller.
– Never go down or up the stairs with the stroller (also on slides), especially with a child inside – it may lead to serious injury to the child and damage to the stroller.
– Rocking the stroller may deteriorate its structure and lead to damage.
– Never lift or move the product with the child inside it.
-Make sure folding elements are locked prior to using the stroller (that is is properly unfolded and locked in place).
– Always assemble all protective and securing elements of the stroller in compliance with instructions.
– Always attach the crotch belt on the bumper bar.
– Check periodically if all elements of the stroller are operational and safe, in particular check if the seat unit, carrycot and the car seat are properly assembled to the chassis.
– When folding and unfolding the stroller, as well as when adjusting the backrest, handle or other elements of the stroller, keep your and your child’s body parts safe.
– The stroller is intended for moving forward.
– Baby Design Group sp. Z o.o. sp. K. is not liable for any damage to property or injuries arising from the assembly and use of the product which is not compliant with instructions and recommendations of the manufacturer covered by this user manual.
– Use only elements supplied or recommended by the manufacturer/distributor.
– Upholstery cleaning manual:
– Clean using a cloth with mild cleaning agent, do not wet it, do not whirl, dry unfolded.
– Be aware of the risk of open fire and other sourced of strong heat in the vicinity of the product.
– Washers, which are a part of the set, are intended to balance any loose between the axis of the front wheel set and the hub. Keep washers away from children — risk of swallowing.

BDG PRODUKCJA SP. Z O.O.
Ul. Strefowa 14B
42-202 Czestochowa
POLAND
Tel. +48 (34) 360 46 64, +48 (34) 360 46 53
Tel. serwis +48 (34) 364 36 41
E- mail:biuro@babydesign.eu
E- mail serwis:serwis@babydesign.eu
www.espiro.pl

Documents / Resources

| espiro Fuel Lightweight Strollers [pdf] User Manual
Fuel Lightweight Strollers, Lightweight Strollers, Fuel Strollers, Strollers, Fuel
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals