Flex Seal FSS_2748 Adhesive Remover Instruction Manual

Flex Seal FSS_2748 Adhesive Remover

Product Information

Specifications:

• Product Name: Topcoat Penetrator
• Usage: Enhances adhesion by penetrating other topcoats
• Application: Suitable for use on various surfaces
• Volume: 250ml
• Manufacturer: XYZ Co.

Product Usage Instructions

• Step 1: Surface Preparation
  Ensure the surface is clean, dry, and free of any dirt or debris.

• Step 2: Application
  Shake the Topcoat Penetrator well before use. Apply a thin, even coat using a brush or roller.

• Step 3: Drying Time
  Allow the product to dry completely as per the manufacturer’s instructions before applying additional topcoats or finishes.

• Step 4: Finish
  Once dry, you can proceed to apply your desired topcoat or finish for a professional result.

Frequently Asked Questions (FAQ):

• Q: Can I use the Topcoat Penetrator on all types of surfaces?
  A: Yes, the Topcoat Penetrator is suitable for use on various surfaces including wood, metal, and plastic.

• Q: How long does it take for the Topcoat Penetrator to dry?
  A: The drying time may vary based on environmental conditions, but typically it dries within 1-2 hours.

• Q: Is it necessary to sand the surface before applying the Topcoat Penetrator?
  A: It is recommended to lightly sand the surface to ensure better adhesion of the product.

FLEX ADHESIVE REMOVER® is an easy-to-use aerosol spray specially formulated to remove tough adhesives, even the super strong adhesive bond of FLEX TAPE®.

WHAT DOES IT DO?

• Removes Flex Tape and other tape such as masking, duct, double-sided, painters, gaffer, scotch, and packing tape, decals, stickers, labels, tar or asphalt, glue residue, gum, bugs, ink, lipstick, marker, paint transfers, pine tar, soot, dirt, tree sap, vinyl tinted windows, wallpaper, wax, weather stripping, etc.
• When applied properly, will not cause surfaces to crack, peel, fade or yellow.

STORAGE

• • Store in a cool, dry location. Flex Adhesive Remover should never be exposed to temperatures over 120°F.
• • Shelf life is 2 Years with proper storage.

HOW DO I USE IT?

• Always use protective gloves and goggles.
• Lift one edge of the Flex Tape and spray directly underneath backing onto adhesive.
• Use pliers to help grab and pull up Flex Tape
• Spray directly on adhesive as you pull Flex Tape from the surface.
• Once Flex Tape has been removed, spray directly on any excess adhesive residue.
• Let it stand 10 seconds and wipe with a clean cloth.
• Repeat until area is free of adhesive as needed. A stiff brush may also help to remove residue.

TEMPERATURES

Should never be exposed to temperatures over 120°F.

NOT RECOMMENDED:

• Does not work on Flex Glue’s super strong adhesive formula
• Do not use in direct contact with drinking water. Product is harmful if swallowed or ingested
• Has not been tested for use around plants or animals
• Do not use near heat, sparks, pilot lights, or any other source of ignition
• Do not smoke while using product
• Avoid contact with skin and eyes
• If left on surface too long, it could penetrate other topcoats.

SIZES & COVERAGE

• 5 oz Large Can
• 12 oz Jumbo Can

RECOMMENDED SURFACES

• Wood
• Glass
• Tile
• Concrete
• Aluminum
• Metal
• Stone
• Stucco
• Plaster
• Copper
• Fabric
• Fiberglass
• Ceramic
• Steel
• Porcelain
•  Cement

May not be compatible with certain plastics, vinyl, paints

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>