FLEX SEAL FSS-2748 Liquid Rubber Sealant Instructions
- May 15, 2024
- FLEX SEAL
Table of Contents
FLEX SEAL FSS-2748 Liquid Rubber Sealant
Product Information
Specifications
- Type: Waterproof Sealant
- Material: High-quality Latex Paint
- Application: Coating, Sealing, Leak Stopping
- Recommended Use: Roofing, Cracks, Holes
- Features: Watertight, Flexible
Product Usage Instructions
Preparation
Before application, ensure the surface is clean, dry, and free of any debris
or loose particles.
Application
- Shake the product well before use to ensure proper mixing.
- Apply the waterproof sealant generously onto the cracks and holes using a brush or roller.
- Ensure the sealant covers the damaged area completely for effective sealing.
- Allow the sealant to dry as per the recommended drying time mentioned on the product packaging.
Additional Tips
- Avoid application in extreme weather conditions like heavy rain or high humidity.
- For best results, apply multiple coats if needed, allowing each coat to dry before applying the next.
- Clean tools immediately after use with water to prevent the sealant from hardening.
FAQ
Q: Can this product be used on all types of roofing materials?
A: This product is recommended for use on most common roofing materials,
but it is always advisable to test on a small inconspicuous area first.
Q: Is this sealant paint suitable for indoor use?
A: While primarily designed for outdoor applications like roofs, this
high-quality latex paint can also be used indoors for specific sealing needs.
FLEX SEAL® is a rubberized sealant spray coating that sprays out as a liquid,seeps into cracks and holes, then dries to a watertight, flexible coating. It’s the easy way to coat, seal, and stop leaks fast.
WHAT DOES IT DO?
- Seeps into cracks & holes
- Dries into a watertight, flexible,pliable coating
- Thick, durable, mastic coating
- Helps stop vibrations & deaden noise
- Helps protect surface from corrosion
- When applied properly, lasts for years
- Will not lose its strength
- Withstands normal hydrostatic water pressure
- Won’t sag or drip in summer heat nor crack and peel in winter
- Dries to the touch in 2-3 hours
- Cures by evaporation and fully cures in 24 to 48 hours
- Dries to a satin finish
- Once dry – can be painted with high-quality latex paint
TEMPERATURES
- Storage: 60° F to 100° F
- Apply to surfaces: 0° F to 100° F
- Withstands: -20° F to 140° F
HOW DO I USE IT?
- Clean surface free of grease,dirt, & oil
- Shake can vigorously for 1 minute before use
- Spray in short bursts in an even sweeping motion
- Spray 8” to 12” from surface in a well-ventilated area ONLY
- Apply multiple, thin, even coats,allowing each coat to dry before applying the next
- Spray a larger area than source of leak
- Feather the edges
- Can be applied on wet or dry surfaces
- After use, flip can upside down, spray a couple bursts to clear nozzle
- Remove any excess with dry paper towel
- Use pumice soap to clean hands
NOT RECOMMENDED
- Not designed to withstand extreme heat, pressure, or harsh chemicals
- Do not use to seal gas/oil tanks (flammable materials)
- Not tested for safe use with plants & animals
- Do not use on potable water containers
- Not tested for food safety
- Not recommended for underfoot applications
- Do not use on Styrofoam
- Not affiliated with GAF. Not for use by professional roofers
SIZES & COVERAGE
- 2 oz. covers approx. 2 ft²
- 14 oz. covers approx. 12 ft²
- 17 oz covers approx. 15 ft²
RECOMMENDED SURFACES
- Wood
- Metal
- Tile
- Concrete
- Masonry
- Fabric
- Glass
- Plastic
- Aluminum
- Porcelain
- Drywall
- Rubber
- Cement
- May not be compatible with some plastics, vinyl, rubbers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>