WHALEN SPEED Turbosmart 50mm Plumback WSRD Spec Blow Off Valve Instructions
- June 1, 2024
- WHALEN SPEED
Table of Contents
WHALEN SPEED Turbosmart 50mm Plumback WSRD Spec Blow Off Valve
Product Information
Specifications
- Model: Turbosmart 50mm Plumback | WSRD Spec Blow-Off Valve
- Main BOV flange adapter: Adapts 38mm to our 50mm BOV
- Main flange adapter to BOV body O-ring
- Main BOV flange to adapter v-band Allen headed bolt side
- Threaded nut side of v-band
Product Usage Instructions
- Ensure the main BOV flange adapter is properly connected to adapt 38mm to the 50mm BOV.
- Secure the main flange adapter to the BOV body O-ring for a proper seal.
- Connect the main BOV flange to the adapter v-band using the provided Allen-headed bolt.
- Ensure the threaded nut side of the v-band is properly positioned to prevent any boost leaks.
- Check that the threaded nut has the inset where the threads start to ensure correct tightening.
- If the provided v-band flange bolt bottoms out, reconfigure the threaded nut for proper depth and tightening.
FAQ
Q: What should I do if the v-band flange bolt bottoms out?
A: If the bolt bottoms out, reconfigure the threaded nut so that the threads start at the proper depth to allow correct tightening and prevent boost leaks.
PARTS
Installation Instructions
- If not configured in this manner. The provided v-band flange bolt will “bottom out” and it’ll cause an issue/boost leak.
- The threaded nut, as pictured, has to have the inset to where the threads start. That will give the bolt the proper depth and will tighten correctly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>