Inateck KB09117 Bluetooth Keyboard Instruction Manual
- June 1, 2024
- inateck
Table of Contents
Instruction Manual
KB09117 Bluetooth Keyboard
Product Diagram
Power ON/OFF
Powier ON; Double-cick (1) and the Butooth ndicator will turn on.
Power OFF: Double-clck () and al three indicators il flash three times.
Bluetooth Pairing
Step1: Mount the iPad onto the magnetic panel, double-click 0 to power on
the keyboard, and it will automatically enter Bluetooth pairing mode. In
future use, please press 1 + co to enter Bluetooth pairing mode. The Bluetooth
indicator will blink once it enters pairing mode successfully.
Step 2: On your iPad, go to Settings > Bluetooth, turn on Bluetooth and
then “Inateck KB09117” will show up in “Other Devices”:
Step3: Tap “Inateck KB09117 to pair it with your iPad and then the
Bluetooth indicator will stay solid in seconds, which means that Bluetooth
pairing is completed.
Note: 1)
Set Up Your iPad: For better user experience, please follow steps below
to set up your iPad at first use once Bluetooth pairing is completed (using
iOS 16 as an example). For any queries, feel free to contact us. Go to
Settings > General > Trackpad and drag the slider to the middle of the
tracking speed. Go to Settings > General > Trackpad and turn on “Tap to Click”
and “Two Finger Secondary Click”. Go to Settings > Accessibility > Touch and
turn off AssistiveTouch. Go to Settings > General > Gestures and enable the
toggle for the”Four and Five Finger Swipe” setting. Optional Settings Steps to
stop Caps Lock changing your keyboard language: Go to Settings > General >
Keyboard > Hardware Keyboard and turn off Switch Languages using Caps Lock.
Steps to disable the double tap period shortcut: Go to Settings > General >
Keyboard > Hardware Keyboard and click the switch to turn on’:” Shortcut.
2)Fix Bluetooth Pairing Problems: Step 1: Go to Settings > Bluetooth, find
“Inateck KB09117” in My Devices and tap the info button O next to it, then
tap”Forget This Device’: If there are multiple pairing records related to the
keyboard, please clear all of them.
Step 2: Hold simultaneously for 3 seconds and then the three indicators will
blink for 3 times once the facto y reset is completed. Step 3: Pair your
Inateck K809117 with your iPad.
Multi-Touch Gestures
| Drag:
Click and hold the item until it lifts up and drag it to another location with
another finger.| | Scroll:
Slide two fingers up or down to scroll.
---|---|---|---
| Swipe:
Swipe left or right with two fingers.| | Zoom in or out:
Pinch with two fingers to zoom in or out.
| Secondary click:
Click or tap with two fingers.| | Show desktop:
Swipe up with three fingers
| App Exposé:
Swipe up with three fingers and pause.| | Swipe between full-screen apps:
Swipe left or right with three fingers.c
Adjust the Keyboard Backlight
- Hold simultaneously to adjust the backlight color. 7 colors are avaflable total.
- Hold simultaneously to adjust the backiigh brightess. 3 levels are ot your choice.
Shortcut Keys
| esc I1 | Undo | 2 :Ai. @ | Brightness- | YA. # 3 | Brightness+ |
|---|---|---|---|---|---|
| Q S 4 | Search | v.,5 | Take a screenshot | 8 A 6 | Lock |
| IC & 7 | Last track | 011 * 8 | Play/Pause | DO ( 9 | Next track |
| ca 0 ) | Mute | ti , | Volume-lame | co I + | Volume t |
Common Keyboard Shortcuts
| X+ x | Cut | X+ c | Copy | X+ v | Paste |
|---|---|---|---|---|---|
| %+A | Select all | X+ Space | Search | control+Space | Switch keyboard layout |
| x+ Tab | Switch between Apps |
LED Indicator
| Indicator | Status | Meaning |
|---|---|---|
| Caps Lock Indicator | Solid | Caps Lock on |
| Off | Caps Lock off | |
| Bluetooth Indicator | Blinking | Bluetooth Pairing |
| Off | Bluetooth connected or unconnected | |
| Battery Indicator- Red | Blinking | Low battery |
| Solid | Charging | |
| Battery Indicator- Green | Solid | Fully charged |
Restore Factory Defaults
Hold Simultaneously for 3 seconds and then the three indicators will blink for 3 times once the { factory reset is completed.
Charging
When the battery level is under 20%, the battery indicator will blink in red.
Please recharge the keyboard in time.
The recommended charging voltage and current are 5V and 250mA respectively. To
recharge the keyboard, you can connect the included USB cable to the charger
of your cellphone or the USB port of a computer. The keyboard will be fully
charged in 2~3 hours. The indicator will stay in red when the keyboard is
charging and turn green when it’s fully charged.
Sleep Mode
- When KB09117 is left idle for 1 minutes, the backlight will turn off.
- When KB09117 is left idle for 10 minutes, it will enter sleep mode and the Bluetooth connection will be disrupted. The connection can be rebuilt with a press of any key.
Note: Tapping the trackpad cannot wake up the keyboard. !
Product Specification
| Bluetooth Version | Bluetooth 5.3 |
|---|---|
| Bluetooth Range | 10 m |
| Charging Time | 2-3h |
| Continuous Working Time (Backlight on) | About 12h |
| Continuous Working Time (Backlight off) | About 45h |
| Operating Temperature | -10°C — +55°C |
| Bluetooth Frequency Range | 2402-2480MHZ |
| Actuation Force | 60±109 |
| Battery Capacity | 500mAh |
Packing List
KBO9117 1
Charging Cable 1
Instruction Manual *1
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the Users, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the
Directive 2014/53/EU .
A copy of the Declaration of Conformity can be accessed from
https://www.inateck.de/pages/euro-compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>