Shenzhen Xindaxing HY-X6X9 WiFi Full HD Action Camera User Manual

Product User Manual
Action camera

Structural diagram

Operation Guide

This device is equipped with a rechargeable lithium battery. When using it for the first time, please charge it as follows:

1. Use USB to connect to the computer for charging.
2. Use a 5V/1A-2A charger for charging;
3. The red light is constantly on during charging, and it can be fully charged after about 4 hours, and the indicator light is off.

Operation Guide 2

1. Power on:
   Long press the power button and the blue light will turn on to start the machine. If the screen is not lit and the blue light remains on, it will be in standby mode. Press and hold the power switch to turn off the device. When turned on, WIFI is turned off by default.

2. Local operation video:
   Insert the TF card and press the power button once to start recording. If you do not operate for 20 seconds and then press the keep on button to cancel the recording, the recording will be automatically saved when stopped.

3. Local operation photography:
   In standby mode, pressing the “iii” button and hearing a “click” sound indicates successful shooting. Long press and hold to continue shooting.

4. WIFI on and off:
   After powering on, briefly press the WIFI button to switch to infrared function, long press to turn on WIFI, and then long press the WIFI button to return.

5. Other settings:
   Click on the icon in the bottom right corner of the screen to view the photos and recordings that have been taken and saved. Click on the icon in the bottom left corner of the screen to make settings.

6. Infrared switching:
   Short press the WIFI key to switch to the infrared function, which can be set to active or automatic.

7. Computer plays files:
   Connect the computer with a data cable, or remove the TF card, connect the computer with a card reader to upload, and play with a mainstream video player.

Note:

1. When the memory card is incorrect or unable to record, please use a computer to format the card;
2. When the machine is dead, it can be reset by poking the reset hole with a reset needle or toothpick.
3. Download, install, and use mobile apps:

1. Search or scan the QR code in the browser to download and install “6 frame probe”. IOS is downloaded from the Apple store, and the Android system searches for and installs it on the browser.

https://www.6zhentan.com/app/d0001/index.html

APP connection

1. Turn on the device and enter standby mode. Short press the up and down keys to turn on Wi Fi functions through settings.
2. Open the phone settings menu, enter the Wi Fi list, and find the phone nameHY-X6X9 488f4c438573.
3. Click on the Wi Fi name and successfully connect to Wi Fi by entering the password 12345678.
4. Return to your phone and open ‘Detective 6’ to enter the main preview interface.

APP recording/photography

1. Open the app and click on “Enter Recorder” to enter the WIFI settings interface. After adding WIFI, return to the device interface and record by default.
2. Click the recording icon to stop recording and save. If you need to record again, click the recording icon to start recording. The file is saved on the TF card of the machine.
3. When in standby mode, click on the photo icon, the indicator light flashes, and the photo is taken.

APP Settings

In the preview screen of the APP homepage, click the settings icon in the lower right corner to enter the settings menu. The main functional settings include: resolution setting, motion detection, recording file duration (cycle recording duration; after turning on cycle recording, the previous files will be automatically deleted and the recording will continue when the card is full), language setting (optional in both Chinese and English), and so on.

APP playback

In the preview screen of the APP homepage, click on the “Recorder File” file in the bottom left corner, select the desired file for playback, download, or deletion, and so on.

Download to local and share

1. Open the app and click on “Recorder Files” in the bottom left corner to select the file you want to download and share
2. Open the file management folder on your phone and find the files that have been downloaded locally for sharing.

Delete files

Select the file you want to delete and click the delete icon to delete the file you want to delete on the TF card on the machine.
Note:

1. The machine time is synchronized with the phone and does not need to be set separately;
2. After turning on WIFI on this machine, you cannot operate video recording or photography on this machine.
3. If the card cannot be inserted for recording, connect this device to the computer to format the memory card: 32k for fat32, 128k for exeat
4. The machine will automatically shut down after 3 minutes of idle (non recording or WIFI enabled).
   When the battery is low, it will automatically stop recording and automatically save and shut down.

6. APP password: 12345678; WIFI password: 000000

Product specifications

1920X1080-1080P@30fps 1280X720 720P@60fps ; 480P@60ipsWait a minute.
Camera resolution| 36M;24M
( 6544X3680 ) ;12MWait a minute.
supportive
system| Windows XP/7/Vista/8/10; Mac OS X 10.4more than; Linux;
Type| 1000mAhPolymer lithium battery
working hours| Recording for about 3 hours (without WIFI and infrared)
---|---
Size and weight| 105x31x17MM;58g
Storage support| Supports 8-512GB micro SD card (recommended to use U3 TF card)
Charging voltage:| DC-5V—500-1000mA
Light source frequency| 50HZ/60Hz
Interface
medium:| TYPE-C

Safety precautions

Please follow the following basic safety precautions when using this product.

1. Do not let this product get wet or wet. Please keep the equipment away from direct sunlight and heat sources.
2. When connecting the power cord, please be careful not to step on it or place objects on it, which may cause compression. Special attention should be paid to protecting the connectors of the power cord connected to the device.
3. Please use a power adapter with an output of 5V, 500-1000MAH, or a desktop computer or power bank for charging. Charging with a charger that exceeds the current and voltage may cause harm.
4. Do not disassemble the machine casing or repair it yourself.
5. If not used for a long time, it needs to be taken out and filled once every three months.
6. The temperature range for use of this product is -20 ℃ ~~50 ℃ . Use outside this temperature range may cause setting failures
7. This product is only suitable for children aged 3 and above. Be careful not to swallow product accessories
8. Please maintain a distance of at least 15CM from the implanted medical equipment (such as pacemakers/implanted cochlea, etc.)
9. The content of this manual and the specifications of this product are subject to change without prior notice.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged  to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

ISED Statement

This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>