Inateck PR2003 Thermal Printer User Manual
- May 15, 2024
- inateck
Table of Contents
PR2003 Thermal Printer
User Manual
Thermal Printer
PR2003
Product Introduction
| 1 | Power Button |
|---|---|
| 2 | Indicator |
| 3 | Function Button (Cut/Open) |
| 4 | Lanyard Hole |
| 5 | Charging Port |
Quick start
Charging: Before using the device, please charge it first.
Load Paper
Power On: Hold the power button for 3 seconds. When the indicator near
the power button lights up, it indicates that the printer is powered on
Paper Calibration; Press the power button once, and the printer will
automatically initiate paper calibration
Use of PR2003
APP Download
You can download Flash Mini from the Google Play and the App Store.
Alternatively. you can scan the QR code below for download
|
---|---
https://play.google.com/store/apps/details?id=com.futureprt.flashmini&pcampaignid=web_share
|
<https://apps.apple.com/cn/app/flashmini/id1621669702> Bluetooth Connection
Print Labels
- Click on ,select the label type, and then enter the label editing interface.
- You can choose the corresponding label size based on the paper size you loaded.
- Click on “Text,” a “Double Click” sample will pop up. Double-click on the sample to edit the content, and then click on “OK” to save the content.
- Click on “Print” to complete printing.
Cut Labels
Push the function button upward to cut labels.
Indicator
| Status | Meaning |
|---|
Green Light On
| Normal Standby Mode
Fully Charged
Blue Light On| Printing(Bluetooth Connected)
Red Light On
| Charging
Opening Paper Compartment
Out of Paper
Improper Paper Loading
Red Light Slow Blinking| Low Battery
Product Specification
| Bluetooth Version | V5.2 |
|---|---|
| Bluetooth Range | 10m |
| Charging Time | 2-3h |
| Working Time | About 5h |
| Operating Temperature | 0-50°C |
| Printing Resolution | 203dpi |
| Battery Capacity | 1200nnAh |
| Bluetooth Frequency Range | 2402-2480MHz |
Packing List
PR20031
User Manual1
Data Cable1
FCC Note:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the Users, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measure$;
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment, This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.
EU Declaration of Conformity
Inateck Co. Ltd. hereby declares that this device complies with the Directive
2014/53/EU A copy of the Declaration of Conformity can be accessed from
https://www.inateck.de/pages/euro-compliance.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM -4 PM CET)
Fax. +49 341 5199 8413
Address: Fraunhoferstra~e 7, 04178 Leipzig, Deutschland
North America
lnnoteck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM-5 PMPST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
Manufacturer
Shenzhen Inateck Technology Co. Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street,
Longgang District, Shenzhen, Guangdong, China
F &M Technology GmbH
Fraunhoferstra~e 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden,
United Kingdom, HP16 OAL
Tel: +44 20 3239 9869
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>