DWVO FTBFVT-0021-0022 Makeup Vanity with Sliding Lighted Mirror and Power Outlet Instruction Manual

DWVO FTBFVT-0021-0022 Makeup Vanity with Sliding Lighted Mirror and Power

Outlet

Product Information

Specifications

• Model: FTBFVT-0021, FTBFVT-0022, SDJMY-V1
• Installation: Requires two or more people
• Recommendation: Professional installation is highly recommended
• Surface: Assemble on a flat, clean, and soft surface

Product Usage Instructions

• Assembly Instructions
  Follow the provided assembly instructions carefully for the proper installation of the product. Ensure all components are assembled in the correct order and orientation.

• Outer Runner Installation
  When installing the outer guide rail, use the guide rail notch to assemble towards the inner direction of the drawer. Fix the screws according to the marked position. Adjust side-to-side if the installed position is changed.

• Inner Runner Installation
  When installing the inner guide rail, use the guide rail notch to assemble towards the inner direction of the drawer. Fix the screws according to the marked position. Adjust up and down if the installed position is changed.

FAQ

• Q: Do I need professional installation for this product?
  A: Professional installation is highly recommended to ensure proper setup and functionality of the product.

• Q: How many people are required for installation?
  A: Two or more people are needed to complete the installation process as per the user manual.

• Q: What surface should I assemble the product on?
  A: It is advised to assemble the product on a flat, clean, and soft surface to prevent damage during installation.

Important Note

1. Two or more people are needed to complete the installation.
2. Please protect the wires and remote control accessories from damage during installation.
3. Professional installation is highly recommended.
4. Assemble on a flat, clean and soft surface.

PARTS AND HARDWARE

USING CAM LOCK AND QUICKFIT

Tighten quickfit until the shoulder is flush with the panel. Do not overtighten or under-tighten.

When fitting the cam lock, ensure the starting position is correct before you insert the connecting quickfit.

• The quickfit head should be in the centre of the cam lock when the two panels are joined.
• The Cam lock should be inserted before quickfit.
• Turn the cam lock clockwise to tighten.

PRE-FIX DRAWER RUNNER INSTRUCTIONS

Pull the inner and outer drawer runners apart before fixing them to the panels.

Slide drawer runners apart until the drawer lock can be seen, as shown.

Press and hold the drawer runner lock and then continue to slide the drawer runners apart, as shown.

Your inner and outer drawer runners are ready to be fixed to the panels.

• When installing the outer guide rail, please use the guide rail notch to assemble towards the inner direction of the drawer. Please fix the screws according to the marked position. If the installed position is changed, adjust it side-to-side at the marked position.
• When installing the inner guide rail, please use the guide rail notch to assemble towards the inner direction of the drawer. Please fix the screws according to the marked position. If the installed position is changed, adjust it up and down at the marked position.

ASSEMBLY INSTRUCTIONS

Installation Completed

CONTACT US

If you have any questions about the installation of products, just contact us (amazon.com orders only)

• Log into your Amazon account
• Go to “Your Orders” and find the purchase
• Click on “Contact Seller”

References

• amazon.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>