DWVO HEFTSBWF-01VTIX Blue Buffet Sideboard Modern Mirrored Instruction Manual
- June 1, 2024
- DWVO
Table of Contents
DWVO HEFTSBWF-01VTIX Blue Buffet Sideboard Modern Mirrored
Product Information
Specifications
- Model: HEFTSBWF-01VTIX, HEFTSBWF-01L9RP
- Product Type: Sideboard
Product Usage Instructions
Assembly Instructions
To assemble the sideboard, follow the steps below:
- Start by assembling part A using 10 pieces.
- Proceed to part B and C, using 6 pieces of each.
- Follow the instructions for part E.
- Finally, complete the installation by incorporating 2 pieces of part M.
Ensure all parts are securely connected as per the assembly instructions provided.
Installation Completion
Once you have followed all the assembly instructions and all parts are
securely connected, your sideboard installation is completed.
FAQ
-
Q: How long does it take to assemble the sideboard?
A: The assembly time can vary depending on individual skill level, but on average, it takes approximately 1-2 hours to assemble the sideboard. -
Q: Are additional tools required for assembly?
A: The assembly instructions should specify if any additional tools are needed. Typically, basic tools like a screwdriver or allen key might be required for assembling the sideboard.
ASSEMBLY INSTRUCTIONS
HEFTSBWF-01VTIX HEFTSBWF-01L9RP
Sideboard
Notice
- Follow the installation instructions. Please confirm all accessories are preset before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only all pieces are correctly assembled.
- If you encounter any problems during installation, please contact our customer service.
- Please put a carpet on the floor to avoid scratching it.
Tools Required
Using camlocks
-
Step 1:
Connect the cam stud as directed in the assembly instructions using a screwdriver. -
Step 2:
Insert the cam socket as shown in the instructions.
Note: Ensure that the arrow on the top of the camlock points towards the entry hole for the -
Step 3:
Push the cam stud into every hole. -
Step 4:
Turn the cam socket with a screwdriver.
You should feel a click when the camlock is locked in place.
The joint is now secure.
ASSEMBLY INSTRUCTIONS