DWVO Pool Basketball Hoop Instruction Manual
- June 15, 2024
- DWVO
Table of Contents
DWVO Pool Basketball Hoop
Installation Alert
To save your time and safety, please read the instructions carefully and check all the accessories in the package before installing, weighing, displaying and disassembling the basketball stand, master the installation steps and details before starting to install this product requires at least 2 adult installation, please prepare 2 movable wrenches.
If there are any problems on the installation and use, please contact the after-sales staff at any time. We will help you in time to reduce your trouble or damage to the product!
Parts List
Part | Name & Specification | Part | Name & Specification |
---|---|---|---|
A | M8*40MM Plastic bolt .X2 |
| I| Wheel Shaft X1
B| M8*40MM. bolt X4
| J| Top pole X1
C| M8*16MM. bolt X2
| K| Bottom pole X1
D| M8*70MM bolt Xl
| M| Net X1
E| M8*20MM. bolt X2
| N| Rim X1
F| Support rod ·X2
| 0| Backboard X1
G| Pole brace X2
| p| Base X1
H| Wheel X2
| L| M8*20MM Plastic bolt X2
Installation steps
-
Insert the Wheel shaft(I) into Wheel(H),Base(P) and end of Bottom pole(K) as shown.
-
Fix one end of 2pcs Pole brace(G) on Bottom pole(K)by 2pcs Plastic bolt( L),then fix the other end of Pole brace(G) on two sides of Base(P) by Bolt(E) as shown.
-
Install Rim(N)&Top pole(J) on Backboard(O) by 4pcs Bolts(B) as shown.
-
Fix one end of 2pcs Support rod(F) on Top pole(J)by Bolt (D),then fix the other end of Support rod(F)on two sides of Backboard(O)by Bolt(C)as shown.
-
Connect the Top pole(J)&Bottom pole(K)as shown, fix them by 2pcs Plastic bolts (A) .
The height adjustable is 1.25-1.75m
Install the ball net