DWVO DGRT-V1 Double Rustic Bathroom Vanity Instruction Manual
- May 15, 2024
- DWVO
Table of Contents
DWVO DGRT-V1 Double Rustic Bathroom Vanity
Product Information
Specifications
- Model: DGRT-V1
- Assembly Instructions: FTHKCT-0026, FTHKCT-0027
- Number of Screws : 6 pcs
- Number of Doors : 1 pc
Product Usage Instructions
Assembly
- Fully tighten all screws using wrench # L.
- Repeat the assembly step for another door if applicable.
Hinge Adjustment
Outside Machine Screw:
In case the door does not align properly:
- To adjust the door towards the outside of the unit, turn the Inside Machine Screws to the LEFT or COUNTERCLOCKWISE.
- To adjust the door towards the inside of the unit, turn the Inside Machine Screws to the RIGHT or CLOCKWISE.
Note: It may take several minutes to adjust properly. Fully tighten the Outside Machine Screws once the door is in the desiredposition.
Safety Precautions
For safety and stability, secure the anti-tip accessories to the wall to
prevent tipping, injury, and property damage.
FAQ
How do I know if I need to adjust the hinges?
If the door does not align properly or closes unevenly, you may need to
adjust the hinges using the Inside Machine Screws as described in the manual.
Notice:
- Please unbox the item from the side with an open label and put a carpet on the floor to avoid scratching it.
- Follow the installation instructions carefully. Before installation, please ensure that all accessories are present. For large items, we advise you to install them with 2 or more people for faster and safer installation.
- Do not fully tighten the screws during initial assembly.Fully tighten the screws only once all pieces are correctly assembled. Do not use power tools.
- Do not stand, climb, or swing on the product.
- If you encounter any problems during installation, please contact our customer service.
PARTS LIST
EXPLOSION DIAGRAM
ASSEMBLY INSTRUCTION
HINGE ADJUSTMENT SUPPLEMENT
In the event that the door does not align properly, the INSIDE Machine Screws located on the Hinges are for adjusting slightly to the Left or Right. DO NOT LOOSEN THE OUTSIDE MACHINE SCREW FOR ADJUSTMENT.
- To adjust the door toward the OUTSIDE of the unit, turn the Inside Machine Screws to the LEFT, or COUNTERCLOCKWISE. (See Figure A)
- To adjust the door toward the INSIDE of the unit, turn the Inside Machine Screws to the RIGHT, or CLOCKWISE. (See Figure B)
*Note: Please be patient, it may take several minutes to adjust properly. Only once the door is in the desired position, fully tighten the OUTSIDE Machine Screws. This will ensure that the door 1s secure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>