SANSI C23ZW024 Grow Light Indoor Plants User Guide
- June 1, 2024
- SANSI
Table of Contents
LED Grow Light
User Guide
Product Overview
Buttons & Indicator
Timer| | Press timer button to set auto-off time, 3 options available with
corresponding indicator.
---|---|---
Timer
indicator| | Indicates auto
OFF time| Red:12H
Green: 6H
Yellow: 3H
Brightness| | Press Brightness button to switch brightness among 4 levels.
ON/OFF| | Press Power button to turn ON/OFF the light
Installation
- Take the product out of the package, check the items come with the pack are intact.
- Use the lamp clip to fix the grow light to the prepared flower pot.
- Slightly pull the lamp vertically, make sure the lamp is properly fixed. It’s not easy to make any displacement.
- Adjust the flexible gooseneck to the desired height and angle.
Product Parameters
Model: C23ZW024-V0010A27
Input: 100-240V~, 50/60Hz
Rated Power: 10W
Spectrum: Full spectrum
PPF: 14.07 umol/s
Color Temp: 4000K
Timer: 3/6/12 hrs available
Installation: Clip-on
Lifespan: 25,000 hrs
Working Temperature: -10~40 ℃
Working Humidity: 10-95%RH
Safety Warnings
- This product is suitable for indoor damp location use. Do not expose the product to rain or wet conditions.
- Read the user guide thoroughly before first use. Follow all the safety instructions and information.
- Do not cover the light source panel e. g. with paper or textiles.
- Risk of burns! Do not touch the light source during use.
- Ensure the voltage given on the rating label or in the instruction manual complies with the power supply.
- Do not stare at the operating light source or direct the beam at other people or animals to prevent eye damage.
- Install the product according to the intended use and as described in this manual.
- Do not install / place the product in adverse ambient conditions or in rooms where heat sources, hot steam, corrosive gas, flammable gas, vapors or dust are present.
- The operating ambient temperature of the product is -10 ~ 40°C; store the product and its accessories under -20 – +60°C. Do not use the product under the conditions with extremely high or low temperature.
- Do not assemble / install the product under live conditions.
- The light source and power supply driver of this product are not replaceable. When the light source or power supply driver reaches the end of their life, the whole luminaire should be replaced.
2 Years Warranty
lf you have any problems, questions or concerns, please feel free to contact
us before returning the product. The email of after-sales service is:
service@sansiled.eu.
The Mfg. Date is printed on the Certificate of Approval.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>