SANSI TD02 24W LED Grow Light Indoor Plants User Guide
- May 15, 2024
- SANSI
Table of Contents
Clip LED Grow Light
Quick Start Guide
Product Overview
Thank you for purchasing our products. Please read the guide carefully before you use the product and keep t properly for future reference.
Buttons and Indicators
On/Off| | Press the button to turn on the lamp (restore to the last mode and
brightness), and the indicators (“3H” “6H” and “12H”) go off. The indicators
(“3H” “6H” and “12H”) light up under non-working status. Each button press
turns off one LED light source until t is completely off under working status.
---|---|---
Time Setting| | Press the button to respectively enable 3/6/12-hour time
setting function and ight up the corresponding ndicator under the working
status. The amp automatically shuts off when the times up. Press the button to
disable the time setting as the indicators are all off.
Mode| | Press the button to change the emitting color as red, blue and red-
blue mixed color under working status.
Brightness| | Press the button for 5-level of brightness adjustment.
Installation
Steps:
- Take the product out of the package.
- Use the amp clip to fix the lamp to the prepared surface.
- Sightly pull the amp hor zontally, make sure t’s not easy to make any displacement.
- Connect the power cord, installation complete.
Note: The suggested thickness of he surface s between 2-6cm. Do not install the uminaire onto g ass table.
Angle Adjustment
The light source can be bended and twisted in any direction
Technical Data
Name: Clip LED Grow Light
Model: C21GL-TD02-24W
Color: Black
Material: PC + Ceramics
Input Voltage: 220-240 V-, 50 Hz
Rated Power: 24W
Emitting Color: Red/Blue
Brightness Adjustment: 5 levels
Control Type: Buttons
Beam Angle: 120°
Lifespan: 25000 hs
IP Degree: P40
Dimensions: 420x110x75 mm
Operating Ambient Temperature: -10-+40°C
Storage Temperature: -20-+60°C
Safety Warnings
- Read the instruction manual thoroughly before first use. Follow all the safety instructions and information.
- Risk of burns! Do not touch the light source I LED bulb or the housing during use.
- Ensure the voltage given on the rating label or in the instruction manual complies with the power supply.
- Do not stare at the operating light source or direct the beam at other people or animals to prevent eye damage.
- lnstall the product according to the intended use and as descri bed n this manual.
- Do not place the product near a heat source or exposed fire source, such as an electric heater or oven, fire, candle, or other places that may produce high temperature.
- For indoor use only! Do not expose the product to rain or wet location.
- Keep the children or pets away from the product and its accessories during assembly to avoid personal hazard and product damage.
- The luminaire s not suitable for mounting on tubular material.
- The light source and power supply driver of this product are not replaceable. When the ight source or power supply driver reaches ts end of life. the whole luminaire shall be replaced
- Do not staring at the operating lighting source .
2-years warranty
If you have any problems, questions or concerns, please feel free to contact
us before returning the product. The email of after-sales services:
[email protected].