SHARP 32EE2K 32 Inch Hd Ready Smart TV User Guide
- June 13, 2024
- Sharp
Table of Contents
SHARP 32EE2K 32 Inch Hd Ready Smart TV
Online Manual
Settings > Setup > Help Information To launch the Online Manual, press the [MENU] button and then select.
What is included in the box
Accessories
Included with this TV are the following accessories
- 1 x Quick Start Guide
- 1 x Remote Control and 2 x AAA Batteries
- 1 x Safety Leaflet
- 1 x Stand installation pack
Additional Accessories
If you don’t have the RF cable shown below, then you can purchase one from www.umc-uk.co.uk/cables If you are intending to connect your TV to an RF socket in order to receive Freeview you will need this cable.
Microsoft PlayReady™
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected ect unprotected content or content protected by other content access content. Revocation should not aff technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
Freeview Play brings together live TV viewing with ‘‘catch up’’ TV services such as BBC iPlayer, ITV player, More4 and Demand 5. The Freeview Play Explore app features a carousel of genres to select from when searching for programmes, such as sport, comedy, dramas and soaps, etc. Content is made up from recommendations of the major broadcasters and offers an alternative means of searching.
Note that to use the full functionality of Freeview Play your set must be connected to the internet.
Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.
REMOTE CONTROL
Key
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
-
STANDBY – Switch on the TV when in standby or vice versa.
FREEVIEW PLAY – Access the Freeview Play app. -
NUMBER BUTTONS – 0–9 to select a TV channel directly.
MUTE – Mute the sound or vice versa.
TV GUIDE – Opens the 7 day TV guide (digital TV mode). -
VOL (+/-) – To increase/decrease the sound level.
PICTURE – Scrolls through picture mode options.
SOUND – Scrolls through sound mode options.
SOURCE – To display the input/source menu.
CH (+/-) – To increase or decrease the channel being watched.
MENU – To display OSD menu.
EXIT – To exit all menus.
(▲/▼ /◀ /▼/ OK) – Allows you to navigate the on-screen menus and adjust the system settings to your preference.
BACK – To go back a previous step.
FAV – To display favourites menu. -
INFO • Press once for now/next channel information.
• Press twice for information about the current programme.
TEXT – To enter/exit Text.
SUBTITLE – To switch the dialogue at the bottom of the screen (on/off).
TV – To switch to Digital Channels.
YOUTUBE – Access the Youtube App.
NETFLIX – Access the Netflix App
APPS – Access the APPS menu.
RECORD – Access the USB record function.
REC LIST – Opens the list of previously recorded items.
GOTO chapter. – To go to a specific
A-B – Press once to set point, press a second time to return to point.
ANGLE – Select different angle of DVD.
REPEAT – To repeat playback.
Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.
Setting up the TV set for the first time
Fitting the stand
TV panel must be facing downwards.
For the stand installation, there is one type of screw provided as shown
below.
Note: To complete the stand installation you will require a cross head
screwdriver.
Used for attaching the stand to the TV set (fi g.2)
-
Place the TV set on a flat and clean surface with the panel facing downwards to avoid damage.
-
When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each other.
-
When the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.
Connecting your set
- Connect the TV to your power socket.
- If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/ Saorview, skip this step.
Powering On the TV
Switch on the television by pressing the TV control stick located on the TV set.
Insert the batteries supplied into the remote control and press the standby button to power on the TV.
Remote Control: Installing Batteries
Wall Mounting the TV
- Remove the four screws that are supplied in the wall mounting holes.
- The wall mount can now be easily attached to the mounting holes on the rear of the TV.
- Install the wall mounting bracket to the television as advised by the bracket manufacturer.
Image for illustration only. For the dimensions of the VESA mounting, please refer to the Technical Specifications section of this document.
The picture shows the use of spacers, which are not applicable to all sets/installations.
First time installation
Introduction & Language
When the set first turns on, it enters the First Time Installation mode. This can be restarted by restoring the set to default settings in the ‘About TV’ Menu. Select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.
Country
Select the correct country in which the set will be used in. This will enable the set to correctly install the functions applicable in the country of use.
PIN
This needs to be set to establish parental controls.
Time Zone
Set the Time Zone in which the TV will reside. This may be dependent on the country you select in step 2.
Updates Notice
You will need to agree to certain information collection for the TV set to operate as intended.
Network Setup
You can connect the TV to your broadband router or wireless network in order to take advantage of the Smart functions. If you connect the TV to your router using an Ethernet cable, the Wifi set up will be skipped.
Set up Netflix
If you have a Netflix account, it can be set up on the television here. Once set up and validated, the First Time Installation returns to the next step.
TV Mode
Note: In home mode, the TV will switch off automatically after 4 hours in the event that no buttons are pressed on the TV or remote control.
Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). This can be changed in the picture mode settings.
Channel Scan
Choose to install terrestrial channels via Digital or Analog signals.
Note: Analog signals in the United Kingdom have been turned off. Only Digital signals are available.
Connectivity
A
| Ethernet/LAN*| Network Connection
---|---|---
B
| Digital Audio| Digital Optical Audio Output
C
| HDMI 3| HDMI Input
D
| HDMI 2| HDMI Input
E
| L/R| Audio shared for video/ Composite and component/YPbPr
F
| Video/YPbPr| Video Input (green) and HD input (Ypbpr)
G
| SAT In| Satellite Input
H
| RF In| RF / TV Aerial input
I
| HDMI 1 (ARC)| HDMI Input with ARC
J
| Earphones| Earphones Input
K
| Service Input| Input is used only by service centres
L
| CI Card In| Common Interface Module
M
| TF Card In| Micro SD Card Input
N
| USB 2.0| USB 2.0 input x2
Technical Specification
<0.5W in Standby>
| 32EE2K
32EE3K
32EE4K
32EE5K
32EE6K
32EE7K| 32EE2KD
---|---|---
Energy Efficiency Class (SDR)|
E
Power consumption (SDR)|
25 W1366 x 768
Screen resolution (pixels)|
1366 x 768
Screen Size (diagonal)|
81 cm / 32 inches
RF|
75 ohm Antenna / Analog / DVB / Satellite
Inputs|
3 x HDMI • 2 x USB • 1 x Micro SD card slot 1 x RJ45 LAN/Ethernet • 1 x Composite/CVBS Video & Component/YPbPr Input 1 x L/R Audio input for Composite/CVBS & Component/YPbPr
Sound Outputs|
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker*/ Amplifier Watts (RMS)|
2 x 10 / 2 x 8
Voltage and power consumption| AC 220V ~ 240V; 50Hz 25/40/65W (home
mode/standard/max)| AC 220V ~ 240V; 50Hz 25/40/75W (home mode/standard/max)
<0.5W in Standby) >Dimensions including stand (mm)|
730W x 468H x 173D
Net weight (Kgs)| 4.6| 4.8
Wall Mounting|
VESA 200 x 100 (mm)
*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
Harman Kardon is trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the fi rst time – including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are:
Monday to Friday: 8.30am – 6pm
Saturday: 9am – 5pm
Bank Holidays: 10am – 4pm
Closed Christmas and New Years day.
Register your manufacturers guarantee online within 14 days of purchase at
www.registertoday.co.uk/sharp and
enter into a prize draw to Win
a Soundbar Terms and conditions apply. Online registration
only.
References
- registertoday.co.uk
- UMC - Product Support, Sharp, Blaupunkt, Technika, e-motion, Eternity, JMB and Bush
- UMC UK LTD | Warranty & Technical Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>