linptech G6L Self-Powered Wireless Doorbell User Manual

June 6, 2024
linptech

G6L Self-powered Wireless Doorbell User’s Manual VI.0
G6LW (TY)

(Please read the instruction manual carefully before use and keep it properly

About Linptech Tuya Version Doorbell

  1. G6LW Tuya Smart Wi-Fi doorbell includes a transmitter and a receiver:
    linptech G6L Self Powered Wireless Doorbell• The transmitter adopts self-powered pressurized power generation technology to transmit wireless signals, battery-free, environmental protection, and maintenance-free.
    • The receiver plugs into the power socket directly and receives the wireless signal from the transmitter to ring.
    • The receiver supports Wi-Fi and radio frequency connections.

  2. The packing list are as follows
    • Transmitter1 (including double-sided tape)
    • Receiver] • user Manual] • Back Plate1
    • Expansion Screw2

Download Tuya Smart APP

This product has joined the Tuya Smart platform, please search for the “Tuya Smart” app in the Appstore or Android App Market, or scan the QR code below to download and install the App

https://smartapp.tuya.com/smartlife

Receiver installation

  1. Open the package, take out the receiver, and plug the receiver into the power socket.

  2. The yellow LED defaulted to a fast flashing state after power-on, at this time, you can open the Tuya Smart AP to Auto Scan” to add devices quickly; if you fail to scan the device automatically, you can press the volume key for I0 seconds. After the yellow LED is on for a while and flashes slowly, then you can add devices manually in the Tuya Smart App

Receiver configuration

Method 1:
Open the Tuya Smart AP, click on the + sign on the top, click to add a device quickly, scan to Self-powered Wireless Doorbell G6l, click Add to complete the device configuration.

linptech G6L Self Powered Wireless Doorbell - Receiver configuration
1

Method 2:
Open the fuyaSmet APO the Me interface, scan the QR code below, follow the prompts to get up.

linptech G6L Self Powered Wireless Doorbell - qr code
1https://smartapp.tuya.com/s/p?p=gznianheex1wcv5b&v=1.0

Transmitter pairing

This doorbell has to lead been coded before leaving the factory and can be urged directly without coding. Coding is needed only if add more transmitters or ch. age transmitters Though coding one transmitter can match with several receivers or several transmitters match with one receiver. Please follow the steps below to pair.

  1. In the Tuya Smart AP. enter the self-powered wireless doorbell G6L homepage click the product name, and there will add the doorbell interface, click the +” button, a prompt please press the launch button” appears.

  2. According to the prompt, press the transmitter to be paired within 0$e00nds Alter the addition is successful, the interface will show. an added successful’ prompt. The transmitter is added.
    linptech G6L Self Powered Wireless Doorbell - Transmitter
pairing

  3. After successfully adding, press the transmitter, the receiver will ring.

Transmitter installation

Installation method:

linptech G6L Self Powered Wireless Doorbell - Transmitter
installation

  1. Tear off the double. sided adhesive tape on the back of the transmitter
  2. Stick it on the wall

Note:

  1. Because there is a certain distance limit for wireless signal transmission, please make sure to test the ringing before installing the transmitter
  2. Please try not to install the transmitter on the metal anti-theft door, so as not to cause signal attenuation and affect the transmission distance

APP settings

  1. On the doorbell APP homepage, you can set the doorbell ringtone and doorbell volume.
    linptech G6L Self Powered Wireless Doorbell - APP settings
2

  2. Click the doorbell icon to pop up the ringtone setting box, click the left and right arrows to get the ringtone

  3. Click the volume icon to pop up the volume setting box, click the left ad right arrows to set the volume

2. Doorbell mode
In the transmitter pairing interface, select a doorbell button, select the mode and save.

linptech G6L Self Powered Wireless Doorbell - APP settings
1

  1. Ringtone selection Click the right arrow to pop up the ringtone options and choose
  2. Mode selection light& sound mode press the transmitter, the receiver flashes and ring Sound mode Press the transmitter, the receiver only rings.
    Light mode Press the transmitter, the receiver only flashes.

3. APP notification and do not disturb time setting
In the transmitter pairing interface, click the setting button to set the APP Message Push and Do not disturb time.
linptech G6L Self Powered Wireless Doorbell - APP
settings

  1. APP notification You can choose to push messages or not.
  2. Do not disturb time setting: Click the right arrow to add the time period as you need. During the Do Not Disturb time period, the bell will not ring and the light will not turn on.

Product Parameters

Transmitter

linptech G6L Self Powered Wireless Doorbell -
Transmitter Size: p67mm XI9mm
[without double-side adhesive tape)
Weight36g
Frequency: 433.92MHz
Distance: 50M (outdoor open area)
Transmitting consumption: 10dBm
The strength required for operation: About 700g

Receiver
Size:68mm x 31mm ( without plug)
Weight: 64g
Input.110-240 AC-50/60
Standby consumption:1w
Rated consumption (Maximum): 2W
This product contains a wireless transmitter module with CMIT ID; 20200P15603

Indicator light status

1| Wi-Fi Easy-Connect configuration status| Orange LED flashes quickly, on for 0.1S and off for 0.2S
---|---|---
2| Wi-Fi Access Point configuration status| Orange LED flashes slowly,
on for 1.5S and off for 1.55
3| During WiFi connection (After the WiFi information has been obtained during network configuration, and the connection is being disconnected and reconnected)| Blue LED flashes quickly,
on for 0.1S, off for 0.2S.
Reconnect after disconnection or connection timeout after 3 minutes, turn off the indicator light flashes
4| WIFI is connected to the router (regardless of whether the router is connected to the cloud)| The indicator light does not flash, it is used to indicate the network status and avoid light pollution
5| WiFi is off| The indicator light does not flash, it is used to indicate the network status and avoid light pollution
6| WIFI upgrade status| Orange LED flashes slowly,
on for 0.25 and off for 0.85

Warranty Card

Dear valued customer
Thank you for selecting our self-powered wireless doorbell G6L, in order to improve our service, please fill in the warranty card information carefully
Warranty Card
Name:__
Add: __
Tel:____
Product Type:____
Fault Reason:____
Purchase Time:

  1. The free warranty time of the product is one year, and you can get maintenance upon your own payment after one year
  2. If maintenance is needed, please supply us with an effective selling list and complete warranty-card
  3. If the faulty is caused by wrong operation or other wrong maintenance, the warranty is not supplied
  4. The product is out of warranty range if it is opened, reinstalled, or maintained without our authority

Wuhan Linptech Co., Ltd
Website: www.inptech.org
E-mail: service@linptech.com
Tel: 86-027-87413985
Address: Floor 2, Block A, Lianxiang Enterprise Center, Jiangxia District,
Wuhan 430205, Hubei, China

Caution:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals