KYSONA EM9 Wireless Ergonomic Mouse User Guide
- June 1, 2024
- KYSONA
Table of Contents
KYSONA EM9 Wireless Ergonomic Mouse
Power On/Off
- Insert batteries into the battery box.
- Slide the switch to power on/off the mouse.
Connect up to 3 devices via mode Switching:
- Press the mode switch button on the bottom to toggle between:
- 2.4G mode (red light)
- Bluetooth channel 1
- (flashing green light)
- Bluetooth channel 2
- (flashing blue light)
2.4G Mode Pairing:
- Enter 24G mode, and the red light blinks.
- Insert the receiver into the USB; it auto-pairs.
- After pairing, red light for 3 seconds, then off.
- If not paired automatically, press the left + middle + Right buttons for 3 seconds to reactivate pairing mode.
Bluetooth Pairing:
- In Bluetooth mode, hold the switch button for 3 seconds until quickly flashing.
- Go to the BT settings of your device and find “EM9 BT3.0 ” or “EM9 BT5.0 ” to pair and connect.
- If the connection is built up, the BT indicator light will automatically turn off.
- If not paired automatically, press the pairing buttons for 3 seconds to reactivate pairing mode.
DPI (Dots Per Inch)
- Change DP| with a press of the DPI cycle button.
- Factory DP| settings:
| 800 Pl | I nd i ca t or flashes 1 time, |
|---|---|
| 1200 DPI | The indicator flashes 2 ti m es, |
| 1600 Pl | The indicator fl a shes 3 times, |
| 2400DPI | The indicator fl ashes 4 times, |
| 4000 DPI | The indicator f las h es 5 t i mes. |
Battery and Sleep
- The red battery indicator light flashes means low power, please replace the batteries
- Moving the mouse wakes it up from Level 1 sleep mode (inactive for 5s to 1 minute) or Level 2 sleep mode (inactive for 1 minute to 30 mins).
- Pressing a key wakes the mouse up from Level 3 sleep mode (inactive for more than 30 minutes).
Quick Support
- Detailed Manual: support.kysona.com/em9gx
- Support Email:service@kysona.com
Read User Manual Online (PDF format)
Loading......