KYSONA M600S Wireless Mouse User Manual
- June 17, 2024
- KYSONA
Table of Contents
M600 Gaming Mouse
User Manual
Thank you for choosing the KYSONA mouse, please read this manual before using it for the best experience.
Package Content
M600 Gaming Mouse …. X1
User Manual …. X1
USB Receiver …. X1
Type-C Cable …. X1
Product Function Keys
- Left Button
- Right Button
- Scroll Wheel
- Charging Indicator
- Backward Button
- Forward Button
- DPI Button
- Charging Port
- Mode Switch
- Pair Button
- USB Receiver
Mouse Parameter
Name: M600
Type: Wireless Gaming Mouse
Dimensions & weight
Product Dimensions: 11842x40mm
Product Net Weight: 55g
DPI/Polling Rate
DPI: 50-26000 DPI
Polling Rate: 125/250/500/1000 Hz(default)
Charging
Interface Type: Type-C
Capacity: 500mAh
Solution
Sensor: PAW3395
LOD Setting
LOD Gear: lmm/2mm(default)
Programmable Button
Number: 6
Cable
Type: paracord
Cable Length: 1.6m
Connection
Connection Way: Wired/2.4G/BT
Effective Connection Distance: 10M
System Support
Windows 8/10/11/Mac OS
Set-up Guide
2.4G Mode (Wireless Gaming)
(1)
Slide the mode switch to “2.4G: The indicator light will turn red
(2)
Take the USB dangle from the hidden slot and insert it into the USB port of
your device.
(3)
Press the left, the middle and the right buttons at the same time until you
see the yellow light flash; the yellow light will remain still for 3 seconds
if the pairing is successful.
(4)
The mouse will automatically pair with your computer, and the indicator light
will turn off.
Wired Mode
(1)
Slide the mode switch to “Off’. The mode indicator light will turn off.
(2)
Connect the mouse to your computer using the provided cable, plug and play
BT Mode
(1)
Slide the mode switch to BT. The light will be blue.
(2)
Press the pair button for 3 seconds and the blue light will flash rapidly.
(3)
Go to the BT setting of your device and find the M600-5.1 to pair and connect.
(4)
If the connection is built up, the BT indicator light will remain blue for 3
seconds and turn off.
DPI Switch
You can change your DPI with a press of the DPI cycle button at the bottom of
the mouse.
The factory DPI settings are set at 400 (default), 800,1600, 3200, 6400,
26000, or you can fine-tune your own sensitivity setting using PC driver.
Customize M600 via PC Driver
Kysona driver allows for customization of button functions, macros, DPI, LOD, battery management, report rate, and other mouse settings
Driver Download and Install
Please download and install the driver from the KYSONA official website. Here is the link to download the driver
Note
- Driver settings only support 2.4G and Wired mode, and cannot be used in BT mode (if the driver is opened in BT mode, it will prompt “device not recognized”)
- The driver is only for PC, not for Mac
Battery Life and Sleep Mode
With a 500mAh rechargeable lithium battery, the mouse can last for up to 80
hours at a single charge under 1000Hz polling rate. And the battery can be
fully charged in about 2 hours.
Moving the mouse wakes it up from Level 1 sleep mode (inactive for is to 35s)
or Level 2 sleep mode (inactive for 35s to 10mins). Pressing a key wakes the
mouse up from Level 3 sleep mode (inactive for more than 10 mins).
Compatibility
BT mode is compatible with MacOS, Windows 8,10, and 11, but it is not supported on systems older than Windows 7.
Video Tutorial
https://v.kysona.com/m600
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.ct.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>