KYSONA M600 Wireless Gaming Mouse Ultralight 55g User Manual

KYSONA M600 Wireless Gaming Mouse Ultralight 55g

Thank you for choosing the KYSONA mouse, please read this manual before using it for the best experience.

Package Content

• M600 Gaming Mouse … .Xl
• User Manual … .Xl
• USB Receiver … .Xl
• Type-C Cable .. .Xl

Product Function Keys

Mouse Parameter

• Name: M600
• Type: Wireless Gaming Mouse

Dimensions & weight

• Product Dimensions: 118•62•40mm
• Product Net Weight: 55g

DPI/Polling Rate

• DPI: 50-26000 DPI
• Polling Rate: 125/250/500/1000 Hz(default)

Charging

• Interface Type: Type-C
• Capacity: 50DmAh

Solutio

• Sensor: PAW3395

LOD Setting

• LCD Gear: 1mm/2mm(default)

Programmable Button

• Number: 6

Cable

• Type: Paracord
• Cable Length: 1.6m

Connection

• Connection Way: Wired/2.46/BT
• Effective Connection Distance: 10M

System Support

• Windows 8/10/11/Mac OS

Set-up Guide

2.4G Mode (Wireless Gaming)

1. Slide the mode switch to “2.4G.” The indicator light will turn red
2. Press and hold the pair button for 3 seconds to enter pairing mode. The indicator light will flash rapidly.
3. Take the USB dongle from the hidden slot and insert ii into the USB port of your device.
4. The mouse will automatically pair with your computer, and the indicator light will turn off.

Wired Mode

1. Slide the mode switch to “Off”.
   The mode indicator light will turn off.

2. Connect the mouse to your computer using the provided cable, plug and play

BT Mode

1. Slide the Mode Switch to “BT.” Press the pair button to select the BT channel. The mode indicator light will turn green for BT 5.2 channel or blue for the BT 5.4 channel.
2. Press and hold the pair button for 3 seconds to enter pairing mode. The indicator light will flash rapidly
3. Go to the BT settings of your device and find “M600-5.2 or M600-5.4” to pair and connect.
4. If the connection was built up, the BT indicator Ught will automatically turn off.

DPI Switch

You can change your DPl with a press of the DPl cycle button at the bottom of the mouse.
The factory DPl settings are set at 800, 1600 (default), 2400, 3200, 5000, 26000, or you can fine-tune your own sensitivity setting using PC driver.

Customize M600 via PC Driver

Kysona driver allows for customization of button functions, macros, DPl, LO, battery management, report rate, and other mouse settings

Driver Download and Install
Please download and install the driver from the KYSONA official website. Here is the link to download the driver: https://support.kysona.com/m600

Note

• Driver settings only support 2.4G and Wired mode, and cannot be used in BT mode (if the driver is opened in BT mode, it will prompt “device not recognized”)
• The driver is only for PC, not for Mac

Battery Life and Sleep Mode

• With a 500mAh rechargeable lithium battery, the mouse can last for up to 80 hours at a single charge under a 1000Hz polling rate. And the battery can be fully charged in about 2 hours.
• Moving the mouse wakes it up from Level 1 sleep mode (inactive for ls to 35s) or Level 2 sleep mode (inactive for 35s to 10mins). Pressing a key wakes the mouse up from Level 3 sleep mode Active for more than 10 mins).

Compatibility
BT mode is compatible with MacOS, Windows 8, 10, and 11, but it is not supported on systems older than Windows 7.

Video Tutorial

https://v.kysona.com/m600

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>