Komshine KFLC-2 OTDR Dead Zone Eliminator Instruction Manual

June 1, 2024
Komshine

Komshine KFLC-2 OTDR Dead Zone Eliminator

Komshine-KFLC-2 OTDR-Dead-Zone-Eliminator-PRODUCT

Product Information

Specifications

  • Product Model: KFLC-2
  • Features: Compact, rugged, lightweight design with various connector styles
  • Length Options: 100m, 300m, 500m, 1km, 2km
  • Usage: OTDR launch cable, OTDR receive cable, measuring insertion loss and reflectance
  • Fibre Types: Single-mode and multi-mode options

Product Usage Instructions

As OTDR Launch Cable:

Connect the Dead Zone Eliminator to the OTDR and the fiber link to be tested. Use it to launch the optical signal into the fiber for testing.

As OTDR Receive Cable:

Connect the Dead Zone Eliminator to the OTDR and the far-end of the fiber link. Use it to capture the reflected signal for analysis.

Measuring Insertion Loss and Reflectance:

Use the Dead Zone Eliminator to measure the performance of near- and far-end connections in a fiber optic link using an OTDR device.

Testing Link Loss:

Utilize the Dead Zone Eliminator with an OTDR to test the overall link loss in a fiber optic network.

Frequently Asked Questions (FAQ)

  • Q: What are the available lengths for the Dead Zone Eliminator?
    A: The Dead Zone Eliminator is available in 100m, 300m, 500m, 1km, and 2km lengths.

  • Q: What types of fiber modes are compatible with the Dead Zone Eliminator?
    A: The Dead Zone Eliminator supports both single-mode and multi-mode fiber types.

  • Q: How can I use the Dead Zone Eliminator for testing link loss?
    A: Connect the Dead Zone Eliminator to your OTDR device and follow the manufacturer’s instructions for testing link loss in your fiber optic network.

Features & Applications

  • Compact, rugged, lightweight 100m、300m、500m、1km、2km lengths standard
  • Available with a variety of connector styles
  • Compact! Fits easily in OTDR cases or kits
  • Adapters special storage bin design
  • For use as OTDR launch cable
  • For use as OTDR receive cable
  • Measure insertion loss and reflectance of near- and far-end connections of a fibre optic link using an OTDR
  • Use to test link loss with an OTDR

Testing、 Inspection and LocationKomshine-KFLC-2 OTDR-Dead-Zone-
Eliminator-FIG- \(1\)

OTDR optical fiber launch cable is used to measure the loss and reflectivity of the proximal connection and the remote non-corrupt insertion of the optical fiber line using OTDR. Each OTDR launch cable can be used as an OTDR transmitting and receiving cable, both of which were necessary to eliminate blind spots when measuring the complete line loss of the optical fiber with OTDR.OT DR launch cable adopts coiled design, easy to carry, compact and light.Various length options, very suitable for short, medium, and long- distance fibre network test applications

How to Generate a Baseline Trace Using Fibre Rings

  • Use the Fibre Ring as a launch cable.Connect the Fibre Ring between your OTDR and the fibre link under test. This will allow you to measure the loss of the near-end connection.
  • Use the Fibre Ring as a receive cable.Connect the Fibre Ring to the far-end connector of your fibre link under test. This will allow you to measure the loss of the far-end connection.
  • By using the jump cable as a transmitting and receiving cable. You can measure the total insertion loss of the fiber link

Product model

Configuration Fiber type Length Model
Standard,coupler single-mode 150M OS2-150M, 9/125um
Standard,coupler single-mode 300M OS2-300M, 9/125um
Standard,coupler single-mode 500M OS2-500M, 9/125um
Standard,coupler single-mode 1KM OS2-1KM, 9/125um
Standard,coupler multi-mode 500M OM1-500M, 62.5/125um
Standard,coupler multi-mode 1KM OM1-1KM, 62.5/125um
Standard,coupler multi-mode 500M OM2-500M, 50/125um
Standard,coupler multi-mode 1KM OM2-1KM, 50/125um
Standard,coupler multi-mode 100M OM3-100M, 50/125um
Standard,coupler multi-mode 300M OM3-300M, 50/125um

Product usage

Komshine-KFLC-2 OTDR-Dead-Zone-Eliminator-FIG-
\(2\)

Product list

Komshine-KFLC-2 OTDR-Dead-Zone-Eliminator-FIG-
\(3\)

HEAD OFFICE
KomShine Technologies Limited

CONTACT US
Add : 2F Bldg. D Qinheng Tech. Pk. Nanjing,JS, 210001, China
TEL : +86 ( 025 ) 66047688

  • Komshine reserves the right to improve, enhance, or modify the features and specifications of KomShine products without prior notification.
  • Company and product names appearing in this catalogue are resisterd marks or trademarks of respective companies.
  • This catalogue is printed using environmentally friendly paper and ink.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals