Komshine KFM-200 Handheld Fiber Microscope Instruction Manual

June 10, 2024
Komshine

Komshine KFM-200 Handheld Fiber Microscope

Komshine-KFM-200-Handheld-Fiber-Microscope-product

KFM-200 Handheld Fiber Microscope
The KFM-200 Handheld Fiber Microscope is a device used to detect scratches, dirt, and dust on the fiber end face. It has high-end optics that can quickly manually focus and detect any issues on the fiber end face. The product supports UPC’s SC, FC, ST, and LC male heads, with a good optical performance and an integrated laser safety filter, allowing your technicians to quickly find scratches and fiber end dirt.

Product Features

  • 200 times magnification
  • Two different lighting modes can be selected: axial and side illumination
  • Integrated laser safety filter
  • Supports SC, FC, ST, and LC male headers of UPC
  • Imported coated lens for clear visibility of fouling
  • The frosted silicone shell is non-slip, drop-proof and shock-proof
  • 100,000 hours of LED lighting, 20 hours of standby
  • The adapter interface includes 1.25 mm and 2.5 mm universal adapters

Product Usage Instructions

  1. Unscrew the battery cover and insert three LR44 button batteries (6F22) into the battery compartment.
  2. Holding the fiber optic microscope with one hand, aim at the eyepiece with a single eye to accurately check whether the fiber end face needs to be cleaned.
  3. Align the eyepiece and adjust the focal length of the knob to clearly check the degree of dirt on the end face.
  4. Toggle | to jump to the axial illumination, toggle to jump to the side illumination, and toggle o to directly turn off.
  5. Adjust the focus knob to check the clarity of the fiber end face.
  6. When finished, turn off the device and replace the battery cover.

Note:
Avoid using electrical appliances or loads that exceed the output current of this product (the circuit will be protected and there will be no output). Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.

Front panel function description

  1. Eyepiece: Optical fiber end face viewing window
  2. Battery cover: unscrew to put the battery
  3. Switch: Two different lighting modes can be selected
  4. Adapter interface: including 1.25 mm and 2.5 mm universal adapters
  5. Focus knob: adjust the focus of the knob to check the clarity of the fiber end face

Two lighting modes

Toggle “|” to jump to the axial illumination, toggle “||” to jump to the side illumination, and toggle “o” to directly turn off.

Battery cover

The first step is to unscrew the battery cover, and the second step is to put the battery in, and the battery can be replaced and used in time.

Eyepiece viewing

Holding the fiber optic microscope with one hand, aiming at the eyepiece with a single eye, you can accurately check whether the fiber end face needs to be cleaned.

Focus Knob

Align the eyepiece and adjust the focal length of the knob to clearly check the degree of dirt on the end face.

Universal adapter

Universal adapter interface, respectively 1.25mm and 2.5mm is appropriate interfaces Orchestration.

product description

The hand-held fiber optic microscope is a fiber-end face detector. With its high-end optics, it can quickly manually focus and detect scratches, dirt, and dust on the fiber end face. The product supports UPC’s SC, FC, ST, and LC male heads, with a good optical performance and integrated laser safety filter, whether it is tested on the production line or on-site, allowing your technicians to quickly find scratches and fiber end dirt.

Product Features

  • 200 times magnification, the fiber end face is clearly visible.
  • The frosted silicone shell is non-slip, drop-proof, and shock-proof.
  • Support SC, FC, ST, and LC male headers of UPC.
  • Imported coated lens, fouling is clearly visible.
  • 3*LR44 button battery 6F22 (need to buy by yourself).
  • Manually adjust the focus quickly.
  • Small size, can be held with one hand, convenient and fast.
  • 100,000 hours of LED lighting, 20 hours of standby.

Product parameter

Support SC/FC/ST/LC

Product parameter

Magnification 200 times &400 times

Light source and

usage time

| White LED, service life of 100,000 hours;
Battery life of 40 hours
Size| 225mm x 60mm x 42mm
Adapter interface| Includes 1.25 mm and 2.5 mm universal adapters
Interface Type| SC, FC, ST , LC
Overview| Host

1.25 mm and 2.5 mm adapter nylon black bag;

LR44 button battery 6F22 (need to purchase by yourself); Packing box.

Use environment

Operating environment altitude:
areas below 2000m above sea level

Tips

Please read all instructions and warnings before using this product. Irregular use will cause damage to the product or personal safety.

  1. Do not store this product in high temperatures, strong light, and strong magnetic fields, and do not place it in other harsh environments such as fire sources.
  2. Improper use of the product may easily cause product damage or may endanger personal and property safety.
  3. If consumers violate the product manual and improperly use it, the personal and property damage caused by it will be nearby, and our company will not bear any legal responsibility.
  4. Non-professionals are strictly prohibited from disassembling this product.
  5. Avoid using electrical appliances or loads that exceed the output current of this product (the circuit will be protected and there will be no output).
  6. Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.

Standard configuration

  • Nylon carrying bag, product host, battery, adapter interface.

Contact us:

KOMSHINE TECHNOLOGIES LIMITED
Tel: +86 25 66047688
Email: info@komshine.com
Add: 2F Bldg. D Qinheng Tech. Pk. Nanjing, JS, 210001, China.
Website: www.KomShine.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals