KomShine FOCP Fiber Optic Cleaning Platform User Manual
- June 9, 2024
- Komshine
Table of Contents
FOCP Fiber Optic Cleaning Platform
User Manual
Product appearance
Applicable for various optical fiber connectors
Wet-to-dry Combination Cleaning
Use in multiple scenarios
Product Introduction
FOCP Fiber Optic Cleaning Platform adopts lint-free wiping material which can be used in both wet and dry way. FOCP Fiber Optic Cleaning Platform is applicable to clean optical fiber coating, connector end-face, fusion splicer, OTDR, and other fiber optic equipment parts. It can be also used in the cleaning of laboratory, dust-free workshop, etc. The cleaning effect is better when used with alcohol.
Product Feature
- Clean the optical fiber coating
- Clean the optical fiber connectors
- Clean fusion splicer, OTDR and other equipment parts
- Clean dust and oil of other electronic product
- Clean laboratory, dust-free workshop and device factory
- Industrial anti-static DuPont embossing dust-free cloth
- High absorption of water, oil and dust
- Wet and dry dual use–able to use with alcohol
Product Specification
Product material | Lint-free wiping material |
---|---|
Scope of application | FC/SC/LC/ST/Bare fiber |
Cleaning times | 220 perforated wipes > 1000+ cleans |
Product size | 76mm76mm76mm |
Tips
Please read all instructions and warnings before using this product. Irregular use will cause damage to the product or personal safety.
- Do not reuse the cleaning cloth, otherwise its cleaning ability will be reduced.
- Do not expose the product to direct sunlight, high temperature or high humidity.
- After use, place it in a dry and clean place to prevent the contamination.
- Do not wipe the fiber connector directly on the rubber buffer, otherwise the connector will be damaged.
Standard Configuration
Fiber Optic Cleaning Platform, certificate of compliance.
Contact us:
KOMSHINE TECHNOLOGIES LIMITED
TEL: +86 25 66047688
Mail: info@komshine.com
Add: 2F Bldg. D Qinheng Tech. Pk. Nanjing,
JS, 210001, China
Web: www.komShine.com